1. 서론
This manual provides essential instructions for the installation, operation, and maintenance of your Chacon Door/Window Opening Detector, Model 34946. This device is designed to enhance the security of your premises by detecting unauthorized openings of doors and windows.
1.1. 패키지 내용
패키지에 모든 구성품이 들어 있는지 확인하세요.
- 1 x Chacon Door/Window Opening Detector (Main Unit and Magnet)
- 1 x 설치 설명서
- 2 x CR2032 3V Batteries (Note: Please check your package as battery inclusion may vary.)
Image 1.1: Product packaging for the Chacon Door/Window Opening Detector.
2. 안전 정보
- 설치 및 사용 전에 모든 지침을 주의 깊게 읽으십시오.
- 장치를 물과 높은 습도에서 멀리 두십시오.
- 직접 기기를 분해하거나 수리하지 마십시오. 정비는 자격을 갖춘 기술자에게 의뢰하십시오.
- Dispose of batteries according to local regulations. Do not expose batteries to excessive heat or fire.
- 배터리를 어린이의 손이 닿지 않는 곳에 보관하세요.
3. 제품 오버view
The Chacon Door/Window Opening Detector consists of two main parts: the main sensor unit and a magnetic contact. When these two parts are separated (e.g., a door or window opens), the sensor triggers an alert.
Image 3.1: The Chacon Door/Window Opening Detector, showing the main sensor unit and its magnetic counterpart.
3.1. 주요 특징
- Door and Window Opening Detection: Triggers an alert when a protected entry point is opened.
- Immediate Audible Notification: Provides an instant sound alert upon detection.
- 안티 -Tamper Self-Protection: Activates an alarm if the sensor is forcibly removed from its mounting surface.
- 애완동물 면역: Designed to be immune to movements of domestic animals up to 25kg, reducing false alarms.
- 무선 전송: Operates wirelessly with a range of up to 80 meters in an open field.
- 호환성: Works with various Chacon alarm systems (Models 34940, 34941, 34942, 34943, 34948, 34949).
4. 설정 및 설치
4.1. 배터리 설치
- 메인 센서 장치의 배터리함을 찾으십시오.
- 구획 덮개를 엽니다.
- Insert two CR2032 3V batteries, ensuring correct polarity (+/-).
- 배터리 덮개를 단단히 닫으세요.
4.2. 검출기 장착
The detector should be mounted on a door or window frame, with the magnetic contact mounted on the moving part (door/window) itself. Ensure the two parts are aligned and close to each other when the door/window is closed, typically within 1 cm.
- Choose a suitable location on your door or window frame where the sensor and magnet can be mounted parallel to each other.
- Clean the mounting surfaces thoroughly to ensure good adhesion if using adhesive pads (not explicitly mentioned but common).
- Attach the main sensor unit to the fixed frame.
- Attach the magnetic contact to the moving part of the door or window, aligning it with the main sensor unit.
- Test the installation by opening and closing the door/window to ensure the sensor triggers correctly.
이미지 4.1: Example of the Chacon Door/Window Opening Detector installed on a door or window frame.
4.3. Pairing with Chacon Alarm Systems
To integrate the detector with a compatible Chacon alarm system (e.g., models 34940, 34941, 34942, 34943, 34948, 34949), follow the pairing instructions provided with your specific alarm system. Generally, this involves putting the alarm system into pairing mode and then triggering the door/window sensor (e.g., by opening it) to register it with the system.
5. 사용 설명서
5.1. Detection Principle
The detector operates on a magnetic contact principle. When the main sensor unit and the magnetic contact are separated by more than approximately 1 cm, the sensor detects an "open" state. When they are brought back together, it detects a "closed" state.
5.2. 경보 발생
Upon detecting an opening, the sensor will:
- Emit an immediate audible notification (110 Decibels).
- Transmit a wireless signal (433 MHz) to a paired Chacon alarm system, triggering the system's response.
5.3. 안티-Tamp어 기능
The sensor is equipped with an anti-tamper function. If the main sensor unit is forcibly removed from its mounted position, it will trigger an alarm, even if the magnetic contact remains in place.
5.4. Pet Immunity
This detector is designed to ignore movements from domestic animals weighing up to 25kg, minimizing false alarms caused by pets.
6. 유지관리
6.1. 배터리 교체
When the batteries are low, the sensor may indicate this through a specific LED flash pattern or by sending a low battery signal to a paired alarm system. To replace the batteries:
- 4.1절에 설명된 대로 배터리함을 여십시오.
- Remove the old CR2032 3V batteries.
- Insert new CR2032 3V batteries, observing correct polarity.
- 배터리 칸을 닫습니다.
6.2. 청소
Wipe the sensor and magnet with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Sensor not detecting opening/closing. |
|
|
| No signal received by alarm system. |
|
|
| 거짓 경보. |
|
|
8. 사양
| 모델 번호 | 34946 |
| 제조업체 | 차콘 |
| 제품 크기(L x W x H) | 10 x 4 x 15cm |
| 무게 | 100그램 |
| 색상 | 하얀색 |
| 전원 공급 장치 | 2 x CR2032 3V Batteries |
| 고주파 | 433MHz |
| 무선 전송 범위 | 최대 80m (개방된 들판) |
| Sound Level (Alarm) | 110데시벨 |
| Compatible Chacon Alarm Systems | 34940, 34941, 34942, 34943, 34948, 34949 |
| 이안(EAN) | 05411478349464 |
9. 보증 및 지원
9.1. 보증 정보
CHACON products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official CHACON web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
9.2. 고객 지원
For technical assistance, troubleshooting, or further information regarding your Chacon Door/Window Opening Detector, please contact CHACON customer support. You can find contact details on the official CHACON web대지: www.chacon.com (참고: 이것은 플레이스홀더입니다. URL, please refer to the actual brand web지원 사이트입니다.)