Metronic 441374

Metronic Touchbox HD 3 441374 Satellite Receiver User Manual

모델: 441374

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your Metronic Touchbox HD 3 441374 DVB-S2 HD Satellite Receiver. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your view경험.

2. 안전 정보

  • Ensure the device is connected to a power supply matching the specifications (230V~ 50Hz).
  • 화재나 감전을 예방하려면 기기를 비나 습기에 노출시키지 마십시오.
  • c를 열지 마세요asing; 모든 서비스는 자격을 갖춘 인력에게 의뢰하세요.
  • Place the device on a stable, flat surface with adequate ventilation.
  • 장치를 열원이나 직사광선으로부터 멀리 두십시오.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

  • Metronic Touchbox HD 3 441374 Satellite Receiver
  • 리모컨(AAA 배터리 2개 필요, 포함되지 않음)
  • 전원 어댑터
  • 사용자 설명서

4. 디바이스 오버view

전면 패널

앞쪽 view of Metronic Touchbox HD 3 441374 satellite receiver

이미지 1: 앞쪽 view of the Metronic Touchbox HD 3 441374 satellite receiver, showing the display, control buttons (power, channel up/down), and a front USB 2.0 port.

  • 표시하다: 채널 번호 또는 시간을 표시합니다.
  • 제어 버튼: Power, Channel Up/Down.
  • USB 2.0 포트 : For connecting external storage devices (USB flash drives, external hard drives).

후면 패널

뒤쪽 view of Metronic Touchbox HD 3 441374 satellite receiver with connection ports

이미지 2: 뒤쪽 view of the Metronic Touchbox HD 3 441374 satellite receiver, displaying various connection ports including ANT IN, IF OUT, Coaxial S/PDIF, HDMI, and SCART.

  • 개미: 위성 안테나에 연결됩니다.
  • IF OUT: For looping through to another satellite receiver.
  • COAXIAL S/PDIF: 디지털 오디오 출력.
  • HDMI : High-Definition Multimedia Interface for connecting to your TV.
  • SCART(페리텔): Analog video and audio connection for older TVs.
  • 전원 입력: 전원 어댑터를 연결합니다.

5. 설정

5.1 수신기 연결

  1. 위성 안테나 연결: Connect the cable from your satellite dish LNB to the 개미가 들어와요 port on the rear panel of the receiver (refer to Image 2).
  2. TV 연결(HDMI): For optimal picture quality, connect an HDMI cable from the HDMI 수신기의 HDMI 포트를 TV의 사용 가능한 HDMI 입력 단자에 연결하십시오.
  3. TV Connection (SCART): If your TV does not have an HDMI input, connect a SCART cable from the 스카트 수신기의 포트를 텔레비전의 SCART 입력 단자에 연결하십시오.
  4. 전원 연결: 전원 어댑터를 수신기의 전원 입력 단자에 연결한 다음 벽면 콘센트에 꽂으십시오.
  5. 외부 저장 장치(선택 사항): If you plan to record programs or play multimedia files, connect a USB flash drive or an external hard drive to the USB 2.0 port on the front panel (refer to Image 1). The USB port provides sufficient power for most external hard drives without additional power supply (USB Double Power).

5.2 첫 번째 설치

  1. Turn on your television and select the correct HDMI or SCART input source.
  2. Power on the Metronic Touchbox HD 3 receiver.
  3. The first-time installation wizard should appear on your TV screen. Follow the on-screen prompts to select your language, country, and perform a channel scan.
  4. Ensure your satellite dish is correctly aligned to receive signals. The receiver supports Tone Burst and DiSEqC 1.0 protocols.
  5. Once the scan is complete, the receiver will store the found channels.

6. 사용 설명서

6.1 기본 기능

  • 채널 선택: Use the CH+/CH- buttons on the remote control or front panel to change channels. You can also enter channel numbers directly.
  • 볼륨 조절: 리모컨의 볼륨+/볼륨- 버튼을 사용하세요.
  • 메뉴 탐색: Press the MENU button to access the main menu for settings, channel management, and other features. Use arrow keys to navigate and OK to confirm.
  • 전자 프로그램 가이드(EPG): 리모컨의 EPG 버튼을 눌러주세요 view program schedules for upcoming broadcasts.
  • Subtitling: The receiver supports DVB subtitling. Access this feature via the remote control's subtitle button (if available) or through the audio/video settings in the menu.

6.2 녹음 및 시간 이동

To use recording (PVR) and Time Shift functions, an external USB storage device (flash drive or HDD) must be connected to the front USB port.

  • 즉시 녹음: 프로그램을 시청하는 동안 기록 button on the remote control to start recording. Press 멈추다 녹음을 끝내려면.
  • 예약 녹화(타이머): Access the timer function via the EPG or the main menu. You can set specific times and channels for future recordings.
  • 시간 이동: 를 누르세요 정지시키다 생방송 중 버튼을 눌러 방송을 일시 정지하세요. 놀다 to resume from where you left off. You can also fast forward or rewind within the buffered content.
  • 재생: Recorded programs and multimedia files can be accessed through the "Media Player" or "PVR" section in the main menu. Recordings are typically saved in a format readable on PC/Mac (e.g., with VLC software).

6.3 멀티미디어 재생

The receiver supports playback of various multimedia file연결된 USB 저장 장치에서 가져온 이미지입니다.

  • USB 장치를 연결합니다.
  • Navigate to the "Media Player" section in the main menu.
  • 원하는 미디어 유형(비디오, 음악, 사진)을 선택하고 찾아보세요. files.
  • 지원되는 형식은 다음과 같습니다.
    • 동영상: MPG/AVI (Container), MPEG2 MP@ML, MPEG2 MP@HL, MPEG4 MP@L3, MPEG4 HP@L4
    • 오디오: MPEG-1 Layer I, MPEG-1 Layer II, Dolby Digital, Dolby Digital Plus, AAC, MP3
    • 사진: 제이피

6.4 보호자 잠금

The parental lock feature allows you to restrict access to certain channels. This can be configured in the system settings menu. You will typically need to set a PIN code.

7. 유지관리

  • 청소: Disconnect the power before cleaning. Use a soft, dry cloth to clean the exterior of the receiver. Do not use liquid or aerosol cleaners.
  • 통풍: 기기의 통풍구가 막히지 않도록 하여 과열을 방지하십시오.
  • External Hard Drive Management: The receiver is designed to power down external hard drives when in standby mode, conserving energy and extending HDD life.
  • 소프트웨어 업데이트: 제조사 확인해보세요 website (Metronic) periodically for any available software updates for your model.

8. 문제 해결

문제가능한 원인해결책
그림이나 소리가 나지 않습니다Incorrect TV input selected; loose cable connections; receiver not powered on.Check TV input source; ensure all cables (HDMI/SCART, satellite, power) are securely connected; power on the receiver.
"신호 없음" 메시지Satellite dish misalignment; incorrect satellite settings; bad cable connection.Check satellite cable connection; verify satellite dish alignment; perform a channel scan in the menu.
Recording stops after 2 hoursKnown software limitation for some recording modes.This may be a limitation of the device's firmware. Check for potential software updates from Metronic that might address this.
리모컨이 작동하지 않습니다배터리 방전; 장애물; 리모컨이 수신기를 향하지 않음.Replace batteries (2 AAA); ensure no obstructions between remote and receiver; point remote directly at the receiver's IR sensor.
Faint whistling sound in standbyNormal operational characteristic for some units.This is generally considered normal for this model. If it becomes excessively loud or changes, contact support.

9. 기술 사양

특징사양
모델 번호441374
Tuner Frequency Range950-2150MHz
입력 임피던스75옴
Demodulator StandardDVB-S/DVB-S2
비디오 디코딩MPEG2 MP@ML, MPEG2 MP@HL, MPEG4 MP@L3, MPEG4 HP@L4
오디오 디코딩MPEG-1 Layer I, MPEG-1 Layer II, Dolby Digital, Dolby Digital Plus, AAC, MP3
Image Decoding제이피
결의안576i/p, 720i/p, 1080i/p
사이1x USB 2.0, 1x SCART (Péritel), 1x HDMI, 1x SPDIF Coaxial
전원 공급 장치230V~ 50Hz
전력 소비(작동)7W
전력 소비량(대기)1W (excluding LNB and HDD consumption)
치수(L x P x H)18 x 11.8 x 3.7 cm (Ultra compact design)
호환 장치텔레비전
특별 기능Time Shift, USB Recording, Multimedia Playback, Parental Lock, EPG, USB Double Power

10. 보증 및 지원

For warranty information, please refer to the warranty card included with your product or visit the official Metronic web대지.

For technical support or service inquiries, please contact Metronic customer service through their official channels. Keep your purchase receipt and model number (441374) handy when contacting support.

제조업체: 메트로 닉

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.