1. 제품 오버view
The EVGA SuperNOVA 1000 G3 is a high-performance, fully modular power supply designed for personal computers. It features 80 PLUS Gold rated efficiency, ensuring minimal power waste and reduced heat generation. The compact 150mm size allows for easier installation in various PC cases. This power supply incorporates an ECO Thermal Control Fan System for quiet operation and is built with high-quality Japanese capacitors for reliability.
Image 1: EVGA SuperNOVA 1000 G3 Power Supply, top-down view showing the fan grill and side label.
주요 특징:
- 80 PLUS Gold certified efficiency (90% at 115VAC / 92% at 220VAC~240VAC typical loads).
- 130mm Hydraulic Dynamic Bearing fan for quiet performance and extended lifespan.
- ECO Thermal Control Fan System for zero fan noise under low to medium loads.
- Fully modular cable design for improved cable management.
- Heavy-duty protections: Over Voltag전자 보호(OVP), Under Voltage Protection (UVP), Over Current Protection (OCP), Over Power Protection (OPP), and Short Circuit Protection (SCP).
2. 상자 안에 무엇이 들어있나요?
Verify that all components are present in the packaging before proceeding with installation.
Image 2: Included modular cables and accessories for the EVGA SuperNOVA G3 series power supply.
- EVGA 1000 G3 Power Supply Unit
- 모듈형 케이블 세트:
- ATX 케이블(24핀)
- EPS Cables (CPU power)
- PCIe Cables (GPU power)
- SATA 케이블
- Four-Pin Peripheral Cables (Molex)
- 플로피 어댑터
- AC 전원 코드
- 설치 가이드
- 전원 공급 장치 테스터
- 장착 나사
3. 설치 및 설정
Follow these steps for proper installation of your EVGA SuperNOVA 1000 G3 power supply.
- 시스템 준비: Ensure your computer is powered off and unplugged from the wall outlet. Open your computer case to access the power supply mounting area.
- 전원 공급 장치 장착: Carefully place the EVGA SuperNOVA 1000 G3 into the designated power supply bay in your computer case. Secure it using the provided mounting screws.
- 모듈형 케이블 연결: Identify the necessary cables for your components (motherboard, CPU, GPU, storage drives). Connect one end of each required modular cable to the corresponding port on the power supply.
이미지 3: 클로즈업 view of the modular cable connection ports on the EVGA SuperNOVA 1000 G3 power supply, showing labels for SATA, MB, CPU, and VGA connections.
- 구성 요소에 연결: Connect the other end of each modular cable to your motherboard (24-pin ATX, 8-pin EPS), CPU, graphics card(s), and storage devices (SATA power). Ensure all connections are firm.
- 케이블 관리 : Utilize the fully modular design to route cables efficiently, improving airflow and aesthetics within your case.
- AC 전원 연결: Plug the AC power cord into the power supply's AC inlet and then into a wall outlet or surge protector.
- 전원 켜기: Flip the power switch on the back of the power supply to the 'ON' position. You can now power on your computer.
4. 운영
The EVGA SuperNOVA 1000 G3 is designed for reliable and efficient operation. It features an ECO mode for optimized fan control.
에코 모드
The ECO mode feature allows the power supply fan to remain off during low to medium power loads, resulting in silent operation. The fan will automatically activate when the power load increases, or the internal temperature rises, to maintain optimal cooling.
Image 4: Rear panel of the EVGA SuperNOVA 1000 G3, showing the main power switch and the ECO mode toggle switch (labeled 'ECO ON/OFF').
To enable ECO mode, ensure the switch labeled 'ECO' on the rear of the power supply is in the 'ON' position. To disable ECO mode, set the switch to 'OFF', and the fan will operate continuously.
5. 유지관리
정기적인 유지관리는 전원 공급 장치의 수명과 최적의 성능을 보장하는 데 도움이 됩니다.
- 먼지 청소: Periodically clean the power supply's fan and vents to prevent dust buildup, which can impede airflow and cooling. Use compressed air to gently remove dust. Ensure the power supply is off and unplugged before cleaning.
- 케이블 검사: 모듈형 케이블 연결부가 안전하게 연결되어 있고 손상되지 않았는지 주기적으로 점검하십시오.
- 환경 조건: Operate the power supply in a well-ventilated environment with ambient temperatures within the specified operating range (0°C to 50°C).
6. 문제 해결
If you encounter issues with your EVGA SuperNOVA 1000 G3, consider the following common troubleshooting steps:
- 전원 없음: Ensure the AC power cord is securely connected to both the power supply and the wall outlet. Verify the power switch on the PSU's rear panel is in the 'ON' position. Check all internal cable connections (24-pin ATX, EPS, PCIe).
- 시스템 불안정/충돌: This could indicate insufficient power or a faulty component. Verify that your system's power requirements do not exceed the PSU's capacity. Ensure all cables are properly seated.
- 팬 소음: If the fan is excessively loud outside of high load conditions, ensure ECO mode is enabled if desired. Check for any obstructions in the fan or vents.
- Power Supply Tester: Use the included power supply tester to verify basic functionality of the PSU independently of the system.
If problems persist after performing these steps, contact EVGA customer support for further assistance.
7. 사양
Detailed technical specifications for the EVGA SuperNOVA 1000 G3 power supply.
Image 5: Specification label on the EVGA SuperNOVA 1000 G3 power supply, detailing input, output, and efficiency ratings.
| 특징 | 세부 사항 |
|---|---|
| 모델명 | SuperNOVA |
| 모델 번호 | 220-G3-1000-X1 |
| 상표 | EVGA |
| 출력 와트tage | 1000와트 |
| 효율 등급 | 80 PLUS 골드 |
| 폼 팩터 | ATX (Compact 150mm) |
| 냉각 방식 | Air (130mm Hydraulic Dynamic Bearing Fan) |
| 전원 공급 장치 설계 | 완전 모듈식 |
| 입력 Voltage | 100-240 VAC |
| 작동 온도 | 0°C ~ 50°C |
| 치수(길이 x 너비 x 높이) | 5.91 x 5.91 x 3.35 인치 |
| 품목 무게 | 6.1파운드 |
8. 보증 및 지원
The EVGA SuperNOVA 1000 G3 power supply is backed by a 10-year warranty, reflecting its quality and durability. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or further assistance, please visit the official EVGA web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 확인을 위해 구매 증빙 자료를 보관하세요.
중요한: Do not attempt to open the power supply unit. There are no user-serviceable components inside, and opening the unit will void the warranty and may pose a safety risk.
