ALPINE SWE-1080 컴팩트 액티브 서브우퍼 사용 설명서

1. 서론

The Alpine SWE-1080 is a compact 20 cm (8-inch) powered subwoofer designed to enhance the bass response of your vehicle's audio system. Featuring an integrated amplifier, this unit simplifies installation while delivering powerful and clear low-frequency sound. Its robust aluminum die-cast chassis ensures durability and optimal sound performance. This manual provides essential information for the safe and effective use of your SWE-1080 subwoofer.

Figure 1.1: Alpine SWE-1080 Compact Powered Subwoofer. This image shows the top-down view of the compact subwoofer unit, highlighting its protective grille and the Alpine logo.

2. 안전 정보

Please read all safety instructions carefully before installing and operating the SWE-1080. Failure to follow these instructions may result in serious injury or damage to the product or vehicle.

전문 설치 권장: 최적의 성능과 안전을 위해 자격을 갖춘 전문가에게 이 제품을 설치하는 것이 좋습니다.
전원: Connect the unit only to a 12V DC negative ground vehicle electrical system.
배선: 단락을 방지하기 위해 모든 배선이 단단히 연결되고 적절하게 절연되었는지 확인하십시오. 설치 섹션에 명시된 대로 적절한 굵기의 전선을 사용하십시오.
장착 위치: Mount the subwoofer in a location that does not obstruct driving, interfere with airbags, or impede vehicle controls. Ensure it is securely fastened to prevent movement during driving.
온도 및 수분: 제품을 극한 온도, 직사광선 또는 과도한 습기에 노출시키지 마십시오.
통풍: 기기의 과열을 방지하기 위해 기기 주변에 적절한 환기가 이루어지도록 하십시오. 환기구를 막지 마십시오.

3. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

Alpine SWE-1080 Powered Subwoofer Unit
Wired Remote Control with Cable
Power Wiring Harness (with fuse holder)
RCA 입력 케이블
스피커 레벨 입력 하네스
장착 브래킷 (4개)
장착 나사 (다양한 크기)

Figure 3.1: Included Accessories. This image displays all the components typically included with the Alpine SWE-1080, such as the wiring harnesses, remote control, RCA cable, and mounting hardware.

4. 설정 및 설치

Proper installation is crucial for the performance and longevity of your subwoofer. Refer to the diagrams for connection details.

4.1 배선 연결

전원(BATT+): Connect the yellow wire from the power harness directly to the vehicle's positive battery terminal. Ensure an inline fuse (provided) is installed close to the battery.
접지(GND): Connect the black wire from the power harness to a clean, unpainted metal surface of the vehicle chassis. Ensure a good electrical connection.
원격 켜기(REM): Connect the blue wire from the power harness to the remote turn-on output of your head unit. This wire signals the subwoofer to turn on and off with your audio system.
오디오 입력:
- RCA 입력: If your head unit has RCA pre-outs, connect the supplied RCA cable from the head unit's subwoofer or full-range outputs to the RCA input jacks on the SWE-1080.
- 스피커 레벨 입력: If your head unit does not have RCA pre-outs, use the supplied speaker level input harness. Connect the speaker wires from your head unit's speaker outputs to the corresponding wires on the harness, then plug the harness into the SWE-1080.
원격 제어: Plug the wired remote control cable into the dedicated port on the subwoofer unit.

Figure 4.1: Wiring and Control Connections. This diagram illustrates the various input and output ports on the Alpine SWE-1080, including power, ground, remote, RCA inputs, and the remote control connection.

Figure 4.2: Integrated Amplifier Advantage. This image compares the SWE-1080's integrated amplifier design with a traditional setup requiring a separate amplifier, highlighting the simplified wiring and space-saving benefits.

4.2 장착

The compact design of the SWE-1080 allows for flexible mounting options, such as under a seat or in the trunk. Use the provided mounting brackets and screws to secure the unit firmly to a stable surface in your vehicle.

Alpine SWE-1080 Under-Seat Installation Example

Figure 4.3: Under-Seat Installation Example. This image shows the Alpine SWE-1080 installed discreetly under a car seat, demonstrating its compact size and suitable placement for optimal sound dispersion.

5. 사용 설명서

The wired remote control provides convenient access to key settings for optimizing your subwoofer's performance.

Figure 5.1: Wired Remote Control. This image displays the wired remote control unit, showing its various adjustment knobs and buttons for gain, low-pass filter, and phase.

5.1 리모콘 기능

이득(최소/최대): This knob adjusts the overall output level of the subwoofer. Start with the gain at minimum and slowly increase it until the bass blends well with your main speakers without distortion.
LP FILTER (50Hz/100Hz): This knob controls the low-pass crossover frequency. It filters out frequencies above the set point, ensuring only low frequencies are sent to the subwoofer. Adjust this to blend smoothly with your main speakers. A common starting point is around 80Hz.
PHASE (NORMAL/REV): This switch allows you to change the phase of the subwoofer's output (0° or 180°). Adjust this setting to achieve the best bass impact and integration with your main speakers. Listen to your system and select the phase that provides the most impactful and cohesive bass.

6. 유지관리

The Alpine SWE-1080 is designed for durability and requires minimal maintenance.

청소: Use a soft, dry cloth to wipe down the unit. Do not use abrasive cleaners, solvents, or excessive moisture.
통풍: Periodically check that the ventilation openings are clear of dust and debris to ensure proper heat dissipation.
사이: Ensure all wiring connections remain secure. Loose connections can lead to poor performance or damage.

7. 문제 해결

If you experience issues with your SWE-1080, refer to the following common problems and solutions:

문제	가능한 원인	해결책
전원이 켜지지 않음 / 기기가 켜지지 않음	퓨즈가 끊어짐 전원 또는 접지 연결이 느슨함 Remote turn-on wire not connected or no signal	퓨즈를 점검하고 필요하면 교체하십시오. 모든 전원 및 접지 연결이 단단히 고정되었는지 확인하십시오. Ensure remote wire is connected to a switched 12V source from head unit
소리가 나지 않습니다	오디오 입력 신호 없음 게인이 너무 낮게 설정됨 Crossover frequency set too low	Check RCA or speaker level input connections Increase GAIN knob on remote control Adjust LP FILTER knob to a higher frequency
왜곡된 소리	게인이 너무 높게 설정됨 입력 신호가 너무 강함 잘못된 위상 설정	Decrease GAIN knob Reduce volume on head unit Toggle PHASE switch to see which sounds better

If the problem persists after trying these solutions, please contact Alpine customer support or your authorized dealer.

8. 사양

Detailed technical specifications for the Alpine SWE-1080:

특징	사양
모델명	SWE-1080
스피커 유형	서브우퍼
스피커 크기	20cm(8인치)
정격 입력 전력	100 와트
스피커 최대 출력 전력	160 와트
주파수 대역	30Hz - 160Hz
특징	Amplifier integrated, Bass Boost
품목 무게	6.09킬로그램(13.4파운드)
제품 크기(L x W x H)	9.06 x 13.39 x 3.07 인치
제어 방법	유선 리모컨
전원	유선 전기(12V DC)

Figure 8.1: Product Dimensions. This image provides a visual representation of the Alpine SWE-1080's dimensions, indicating its length and width for installation planning.

9. 보증 및 지원

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Alpine web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

You can also visit the Alpine Store on Amazon for more product information and support: Alpine Store

	Jeep Wrangler Unlimited(2011-UP)용 Alpine PWE-S8-WRA 컴팩트 서브우퍼 설치 설명서 2011년형 지프 랭글러 언리미티드(UP)용으로 설계된 Alpine PWE-S8-WRA 8인치 소형 파워드 서브우퍼 시스템에 대한 자세한 설치 안내서입니다. 도구, 액세서리, 분해, 설치 및 배선 지침이 포함되어 있습니다.
	Alpine SWR-12D4 서브우퍼 사용 설명서 및 설치 가이드 Alpine SWR-12D4 12인치 카 오디오 서브우퍼에 대한 포괄적인 사용 설명서 및 설치 가이드입니다. 자세한 사양, 안전 주의사항, 설치 지침, 배선도 및 문제 해결 팁이 포함되어 있습니다.
	Alpine SS-SB10 10-Inch Shallow Subwoofer Installation Manual & Specifications Comprehensive installation guide and specifications for the Alpine SS-SB10 10-inch shallow subwoofer. Learn how to properly install and set up your subwoofer for optimal performance.
	Alpine PSS-23WRA 사운드 시스템 설치 설명서 (Jeep Wrangler Unlimited JL용) 2018년 이후 Jeep Wrangler Unlimited JL에 Alpine PSS-23WRA 사운드 시스템을 설치하는 단계별 가이드입니다. 필요한 공구, 액세서리 목록, 탈거 및 설치 절차, 배선도, 문제 해결 방법을 포함합니다. 안전 주의사항 및 보증 정보도 제공합니다.
	Alpine S2 시리즈 서브우퍼 적용 가이드 및 사양 Alpine S2 시리즈 서브우퍼(S2-W8D2, S2-W8D4, S2-W10D2, S2-W10D4, S2-W12D2, S2-W12D4 모델 포함)에 대한 포괄적인 적용 가이드, 기술 사양, 인클로저 권장 사항 및 설치 참고 사항을 제공합니다. 자세한 구성품 설명, 배선도 및 보증 정보를 제공합니다.
	Alpine Solar Bluetooth 지원 Rock 스피커 - 회색 사용 설명서 Alpine Solar 블루투스 지원 Rock 스피커 - 그레이(모델 QLP542SLR-GR) 사용 설명서입니다. 기능, 충전, 블루투스 페어링, 작동 및 제한 보증에 대해 알아보세요.

Alpine SWE-1080