소개
The Cooler Master Hyper 212 LED is a high-performance CPU cooler designed to efficiently dissipate heat from your processor. It features a PWM (Pulse Width Modulation) Red LED fan, four direct contact heat pipes, and funnel-shaped aluminum fins for optimized cooling. The universal bracket design ensures compatibility with various CPU platforms, providing a straightforward installation process.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Hyper 212 LED CPU Cooler (Heatsink and Fan Assembly)
- 범용 장착 브래킷(인텔 및 AMD 소켓용)
- Mounting Hardware (screws, standoffs, backplate)
- 열전도 페이스트
- Additional fan clips (for optional second fan)
Image: The Cooler Master Hyper 212 LED CPU Cooler, showing the heatsink, fan, and copper heat pipes.
설정 및 설치
Proper installation is crucial for optimal performance. Please follow these steps carefully. Refer to the official installation video for visual guidance.
- 마더보드 준비: Depending on your CPU socket (Intel or AMD), select the appropriate backplate and mounting studs. Secure the backplate to the rear of your motherboard.
- 열 페이스트 적용: Clean the surface of your CPU and the cooler's base. Apply a small, pea-sized amount of the included thermal paste to the center of your CPU's integrated heat spreader (IHS). Do not spread it manually; the pressure from the cooler will distribute it evenly.
- 쿨러를 장착하세요: Carefully align the cooler with the mounting studs on the motherboard. Place the cooler onto the CPU, ensuring the heat pipes make direct contact. Secure the cooler using the provided screws, tightening them in a diagonal pattern until snug. Avoid over-tightening.
- 팬 케이블을 연결하세요: 4핀 PWM 팬 케이블을 마더보드의 CPU_FAN 헤더에 연결하십시오.
- Check RAM Clearance: Due to the cooler's size, verify that it does not obstruct your RAM modules. If necessary, adjust RAM placement or consider low-profile 숫양.
Video: Official Cooler Master installation guide for the Hyper 212 LED CPU Cooler. This video demonstrates the step-by-step process of mounting the cooler onto a motherboard, including backplate installation, thermal paste application, and securing the heatsink.
이미지: 대안 view of the Cooler Master Hyper 212 LED CPU Cooler, highlighting its dimensions and fan design.
작동 지침
The Hyper 212 LED operates automatically once installed and connected to the CPU_FAN header. The PWM function allows the motherboard to control the fan speed based on CPU temperature, ensuring efficient cooling and reduced noise levels during lighter loads.
- PWM 팬 제어: The fan speed adjusts dynamically to maintain optimal CPU temperatures.
- Red LED Illumination: The fan features integrated red LEDs that illuminate when the fan is operational. These LEDs are always on when the fan is running and cannot be independently controlled or disabled without modification.
- 공기 흐름 방향: Ensure the fan is oriented to draw cool air through the heatsink and exhaust warm air towards your case's rear or top exhaust fans for effective system cooling.
유지
정기적인 유지관리는 CPU 쿨러의 수명과 최적의 성능을 보장하는 데 도움이 됩니다.
- 먼지 청소: Periodically inspect the heatsink fins and fan blades for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the fan is not spinning during cleaning to prevent damage.
- 열전도 페이스트: 어떤 이유로든 쿨러를 분리하는 경우, 재설치하기 전에 CPU와 쿨러 베이스 모두에서 기존 서멀 페이스트를 깨끗이 제거하고 새 서멀 페이스트를 도포하는 것이 좋습니다.
문제 해결
If you encounter issues with your Hyper 212 LED CPU Cooler, consider the following:
- 높은 CPU 온도:
- Verify that the cooler is securely mounted and making proper contact with the CPU.
- 써멀 페이스트가 올바르고 고르게 도포되었는지 확인하십시오.
- Check that the fan cable is securely connected to the CPU_FAN header on the motherboard.
- Confirm fan is spinning. If not, check connections or consider fan replacement.
- PC 케이스 내부의 적절한 공기 흐름을 확보하십시오.
- 팬 소음:
- 팬 날개에 닿는 케이블이나 장애물이 있는지 확인하십시오.
- 팬이 방열판에 단단히 고정되어 있는지 확인하십시오.
- Dust accumulation can cause increased noise; clean the fan and heatsink.
- 설치상의 어려움:
- Refer to the detailed installation video and diagrams. Pay close attention to backplate orientation and screw placement.
- Ensure correct mounting hardware is used for your specific CPU socket.
명세서
| 모델 번호 | RR-212L-16PR-R1 |
| 제품 크기(L x W x H) | 0.9인치 길이 x 4.7인치 너비 x 4.7인치 높이 |
| 재료 | 알루미늄(방열판), 구리(열 파이프) |
| 냉각 방식 | Fan, Heat Pipes |
| 팬 유형 | PWM Red LED Fan |
| 최대 회전 속도 | 1800 RPM |
| 기류 용량 | 66.3 분당 입방피트(CFM) |
| 소음 수준 | 31데시벨(dB) |
| 전원 커넥터 유형 | 4핀 |
| 권tage | 12 볼트 |
| 왓tage | 2.28 와트 |
| 호환 장치 | Desktop CPUs (Universal Socket Support) |
| 품목 무게 | 1.7 파운드 |
보증 정보
This Cooler Master Hyper 212 LED CPU Cooler comes with a 1년 보증. For warranty claims or detailed terms and conditions, please refer to the official Cooler Master web사이트를 방문하거나 고객 지원팀에 문의하세요.
지원하다
For further assistance, technical support, or to download the latest drivers and manuals, please visit the official Cooler Master web대지:
You may also contact Cooler Master customer service directly for product-specific inquiries.