Amazon Basics 고강도 틸팅 TV 벽걸이 마운트(PBH-994) 사용 설명서

1. 서론

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Amazon Basics Heavy-Duty Tilting TV Wall Mount, model PBH-994. Please read all instructions carefully before installation to ensure correct setup and to prevent damage or injury. Keep this manual for future reference.

2. 안전 정보

• 중량 용량: 최대 하중 120파운드(54.4kg)를 초과하지 마십시오. 이 한도를 초과하면 심각한 부상이나 재산 피해가 발생할 수 있습니다.
• TV 크기 : This mount is designed for TVs between 37 inches and 80 inches.
• 벽 유형: This mount is designed for installation on concrete, brick, and wood stud walls (16 & 24 inch studs). Do not install on drywall alone.
• VESA 호환성: Ensure your TV's VESA mounting pattern is compatible (200x100 MM through 600x400 MM).
• 전문적인 설치: 설치 과정이나 벽 종류에 대해 확신이 서지 않는다면 자격을 갖춘 전문가에게 문의하십시오.
• 도구: 설치 시 적절한 도구를 사용하세요. 항상 보안경을 착용하세요.
• 어린이들: 설치하는 동안 작업 영역에서 어린이를 멀리하십시오.

3. 패키지 내용

설치를 시작하기 전에 모든 구성품이 있고 손상되지 않았는지 확인하십시오. 부품이 누락되었거나 손상된 경우 설치를 중단하고 고객 지원 센터에 문의하십시오.

영상: All components included in the package: the wall mount assembly, various screws, washers, wall anchors, a mounting template, and the user manual.

• Wall Plate Assembly (with integrated bubble level)
• TV 브래킷 (2개)
• 설치용 하드웨어 키트(다양한 나사, 와셔, 스페이서, 벽 앵커)
• 장착 템플릿
• 사용자 설명서

4. 사양

5. 설정 및 설치

Before installation, ensure you have identified your wall type and the correct VESA mounting pattern for your television. A second person is highly recommended for safe installation.

영상: 앞쪽 view of the Amazon Basics Tilting TV Wall Mount, featuring the horizontal wall plate with an integrated bubble level and two vertical TV brackets attached. The brackets have multiple holes for VESA compatibility and release strings hanging below.

5.1. TV를 준비하세요

1. 화면 손상을 방지하려면 부드럽고 깨끗한 표면에 TV를 뒤집어서 조심스럽게 놓으세요.
2. TV 뒷면에 있는 VESA 장착 구멍을 확인하세요.
3. TV 장착 구멍에 맞는 나사, 와셔, 스페이서를 하드웨어 키트에서 선택하십시오.
4. Attach the two vertical TV brackets to the back of your TV using the selected hardware. Ensure the brackets are centered and securely fastened. Do not overtighten.

5.2. 벽을 준비하세요

1. Determine the desired height for your TV. Use the mounting template to mark the drill holes on the wall.
2. 목재 스터드 벽의 경우: Use a stud finder to locate the center of two adjacent wood studs (16 or 24 inches apart). Mark the drill points. Drill pilot holes using an appropriate drill bit (refer to manual for size).
3. 콘크리트/벽돌 벽의 경우: Mark the drill points. Drill holes using a masonry drill bit (refer to manual for size). Insert the provided wall anchors into the drilled holes.
4. Position the wall plate against the wall, aligning the holes. Use the integrated bubble level to ensure it is perfectly horizontal.
5. Secure the wall plate to the wall using the lag bolts and washers. Tighten firmly, but do not overtighten.

영상: The Amazon Basics Tilting TV Wall Mount is shown installed on a white wall, without a television attached. This view highlights the mount's structure and how it appears before the TV is hung.

5.3. TV를 벽에 설치하세요

1. With assistance, carefully lift the TV and hook the TV brackets onto the top edge of the wall plate.
2. Gently lower the TV until the brackets engage with the wall plate. You should hear a click as the automatic safety lock engages.
3. Pull the release strings downwards to ensure the safety lock is engaged and the TV is securely attached.

영상: This image shows a living room corner with a TV mounted on the wall using the Amazon Basics Tilting TV Wall Mount. The TV is positioned above a media console, demonstrating the mount's low profile and clean aesthetic.

5.4. 설치 비디오 가이드

6. Operating the Tilting Function

The Amazon Basics Tilting TV Wall Mount allows for easy adjustment of your TV's vertical view잉 각도.

영상: 사이드 프로file of the Amazon Basics Tilting TV Wall Mount, illustrating how the TV brackets can be angled relative to the wall plate, allowing for vertical tilt adjustment.

1. To adjust the tilt, gently push or pull the top or bottom edge of your TV to achieve the desired angle. The mount offers a tilt range from +15° (upwards) to -3° (downwards).
2. The friction-based mechanism will hold the TV in place once the desired angle is set.

영상: A television is shown mounted on a wall, viewed from the side. The Amazon Basics Tilting TV Wall Mount holds the TV close to the wall, with a slight downward tilt visible.

7. 유지관리

• 청소: 부드럽고 마른 천으로 마운트를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
• 정기 검사: Periodically check all screws and bolts to ensure they remain tight and secure. Retighten if necessary.
• 손상: 거치대의 어떤 부분이든 손상된 경우 사용을 중단하고 고객 지원팀에 문의하십시오.

8. 문제 해결

• TV 수평이 맞지 않음: Ensure the wall plate was installed level using the integrated bubble level. If not, minor adjustments can sometimes be made by slightly loosening and re-tightening the wall plate screws, or by adjusting the TV brackets if your TV allows.
• 기울이기 어려움: Check that no cables are obstructing the tilting mechanism. Ensure the TV is within the specified weight and size limits.
• TV Not Secure: Verify that the TV brackets are properly hooked onto the wall plate and the automatic safety locks are engaged. The release strings should hang freely.
• 잃어버린 부분들: If any parts were missing from the package, do not proceed with installation. Contact Amazon Basics customer support for assistance.

9. 보증 및 지원

보증 정보 및 고객 지원은 제품에 동봉된 설명서를 참조하거나 아마존 베이직스 공식 웹사이트를 방문하세요. website. You can also contact Amazon customer service for assistance with your Amazon Basics product.