1. 안전 정보
Read all instructions carefully before operating the XPOWER X-2480A Air Scrubber. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- 전기 안전: Always connect the unit to a properly grounded outlet. Do not operate with a damaged cord or plug. Do not immerse the unit in water or use it in standing water. Ensure hands are dry before handling the plug or controls.
- 열 보호: The unit is equipped with dual thermal protection. If the unit overheats, it will automatically shut off. Unplug the unit, allow it to cool, and check for obstructions before restarting.
- GFCI 아울렛: The built-in GFCI power outlets provide additional protection against electrical hazards. Test the GFCI outlets regularly as per manufacturer instructions.
- 필터 유지 관리: Regularly inspect and replace filters to maintain optimal performance and prevent motor strain. Operating with clogged filters can lead to overheating and reduced efficiency.
- 놓기: Place the unit on a stable, level surface. Ensure adequate clearance around the air intake and exhaust to allow for proper airflow.
- 감독: Do not allow children or untrained individuals to operate the unit.
이미지 1.1: 측면 view of the XPOWER X-2480A Air Scrubber, showing important warning labels regarding electrical safety and proper usage.
2. 제품 오버view
The XPOWER X-2480A is a compact and powerful air scrubber designed for professional use in various environments, including construction, water damage restoration, and mold remediation. It features a 3-stage filtration system to effectively remove airborne particulates.
주요 특징:
- 1/3 HP motor with 550 CFM airflow.
- 3-에스tage Filtration System: Nylon Mesh, Pleated Media, and HEPA filters.
- Built-in GFCI protected auxiliary power outlets for daisy-chaining.
- 가변 속도 제어.
- Stackable design for easy storage and transport.
- Filter Clean/Change indicator light.
이미지 2.1: 앞면 view of the XPOWER X-2480A Air Scrubber, showcasin컴팩트한 디자인과 손잡이가 특징입니다.
구성 요소:
- 제어판: Includes power switch, variable speed dial, and filter indicator light.
- Auxiliary Outlets: Two GFCI-protected 115V AC outlets for connecting additional units or tools.
- 공기 흡입/배기: Grilles for air entry and exit.
- 필터: Pre-filter (Nylon Mesh), Pleated Media filter, and HEPA filter.
- 전원 코드: Integrated power cord with cord wrap.
Image 2.2: Close-up of the control panel, showing the variable speed dial and filter indicator light.
Image 2.3: Close-up of the auxiliary power outlets and circuit breaker on the XPOWER X-2480A.
3. 설정 지침
- 단위 풀기: Carefully remove the air scrubber from its packaging. Inspect for any shipping damage.
- 단위 위치: Place the X-2480A on a firm, level surface. Ensure there is at least 1 foot (30 cm) of clear space around the air intake and exhaust grilles for unrestricted airflow.
- 필터 확인: Before first use, ensure all three filters (Nylon Mesh, Pleated Media, HEPA) are correctly installed. Refer to the Maintenance section for filter installation details.
- 전원 연결: Plug the unit's power cord into a standard, grounded 115V AC electrical outlet.
Image 3.1: The XPOWER X-2480A is designed for easy portability and setup.
4. 사용 설명서
- 전원 켜기: Turn the variable speed dial on the control panel from the "OFF" position to the desired fan speed (1-5). The unit will begin operating.
- 팬 속도 조정: Rotate the dial clockwise to increase airflow (higher number) and counter-clockwise to decrease airflow (lower number).
- Using Auxiliary Outlets: The two built-in GFCI outlets can be used to power other equipment or to daisy-chain multiple X-2480A units. The total output for these outlets is 12 Amps maximum when the X-2480A unit is OFF, and 8.5 Amps maximum when the X-2480A unit is ON. Do not exceed these limits.
- 회로 차단기: If the auxiliary outlets or the unit itself stops working due to an overload, check the circuit breaker button next to the outlets. Press to reset if tripped.
- 필터 표시등: The "Filter Clean/Change Light" will illuminate when the filters are becoming clogged and require cleaning or replacement.
- 전원 끄기 : Turn the variable speed dial to the "OFF" position to shut down the unit.
Image 4.1: Demonstrating the daisy-chaining capability of the XPOWER X-2480A with another unit.
5. 유지관리
Regular maintenance, especially filter replacement, is crucial for the efficient operation and longevity of your XPOWER X-2480A Air Scrubber.
필터 교체:
The X-2480A uses a 3-stage filtration system. The filter indicator light will signal when filters need attention.
- 전원 끄기 및 플러그 뽑기: 유지 관리를 수행하기 전에 항상 장치를 끄고 플러그를 뽑으십시오.
- 액세스 필터: Remove the foam cover and unlatch the front panel to access the filters.
- 필터 제거: Carefully remove the filters in reverse order of installation: HEPA filter, then Pleated Media filter, and finally the Nylon Mesh pre-filter.
- 청소/교체:
- Nylon Mesh Pre-filter: This filter is washable and reusable. Clean with water and mild detergent, then allow to air dry completely before reinstallation. Replace if damaged.
- Pleated Media Filter: This filter is disposable. Replace with a new filter when dirty or when the indicator light illuminates.
- HEPA 필터 : This filter is disposable and critical for fine particle removal. Replace with a new HEPA filter when dirty or when the indicator light illuminates.
- 새 필터 설치: Insert new or cleaned filters in the correct order: Nylon Mesh pre-filter first, then the Pleated Media filter, and finally the HEPA filter. Ensure they fit snugly.
- 보안 패널: Reattach the front panel and secure the latches. Replace the foam cover.
Image 5.1: Demonstrating the process of replacing the multi-stage filters in the XPOWER X-2480A.
그림 5.2: 3초를 설명하는 다이어그램tage filtration system: Nylon Mesh, Pleated Media, and HEPA filters.
장치 청소:
광고로 장치의 외부를 닦습니다.amp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no moisture enters the motor or electrical components.
저장:
When not in use, store the unit in a clean, dry place. The X-2480A is designed to be stackable (up to 5 units) for efficient storage and transport.
Image 5.3: Multiple XPOWER X-2480A units stacked, demonstrating the space-saving design for storage and transport.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기기가 켜지지 않습니다. | 정전, 차단기 작동, 코드/플러그 손상. | Check power outlet. Reset the unit's circuit breaker. Inspect power cord for damage. |
| 감소된 기류. | Clogged filters, obstructed intake/exhaust. | Check and clean/replace filters. Ensure clear path for airflow. |
| Filter Clean/Change light is on. | 필터가 더럽거나 막혔습니다. | 유지관리 섹션에 설명된 대로 필터를 청소하거나 교체하세요. |
| 장치가 예기치 않게 꺼집니다. | Overheating (thermal protection activated), electrical overload. | Unplug, allow to cool. Check for clogged filters or obstructions. Reset circuit breaker if applicable. |
| Auxiliary outlets not working. | Tripped GFCI or circuit breaker, overloaded outlets. | Press the GFCI reset button. Check the unit's circuit breaker. Reduce load on outlets. |
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | X-2480A |
| 전원 | 코드식 전기 |
| 왓tage | 375 와트 |
| 모터 | 1 / 3 HP |
| 공기 흐름 (CFM) | 550 퀴놀론 |
| 치수(D x W x H) | 16.6" x 10.4" x 18.9"(42.16cm x 26.42cm x 48.01cm) |
| 품목 무게 | 23.6파운드(10.7kg) |
| 필터 유형 | 3-에스tage Filtration (Nylon Mesh, Pleated Media, HEPA) |
| 오염물질 여과 능력 | Dust, odors, pet dander, pollen, smoke |
| 보조 콘센트 | 2 x 115 Volts AC, GFCI Protected |
| Auxiliary Outlet Total Output (Unit OFF) | 12 Amp초 최대 |
| Auxiliary Outlet Total Output (Unit ON) | 8.5 Amp초 최대 |
| 제어 방법 | Touch (Button Control for circuit breaker, Dial for speed) |
| 특별 기능 | Lightweight, Stackable Design, Filter Change Indicator |
8. 보증 정보
The XPOWER X-2480A Air Scrubber comes with a Manufacturer's 1-year Limited Warranty. Please refer to the warranty documentation included with your product for specific terms and conditions. Keep your purchase receipt as proof of purchase for warranty claims.
9. 고객 지원
For technical assistance, replacement parts, or warranty inquiries, please contact XPOWER customer support. Contact information can typically be found on the manufacturer's official web현장이나 포장재에.