FIBARO MH8-FC4

FIBARO MCO Home MH8-FC4 Fan Coil Thermostat

사용 설명서

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of the FIBARO MCO Home MH8-FC4 Fan Coil Thermostat. This device is designed for controlling fan coil units in central AC systems (2-pipe or 4-pipe configurations) and integrates with Z-Wave smart home systems. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Key features of the MH8-FC4 thermostat include:

  • Applicable to 2-pipe or 4-pipe fan coil control in central AC systems.
  • Tempered glass panel with capacitive touch buttons for intuitive control.
  • Clear display screen showing essential control information.
  • Intelligent On/Off control for fan speed and electric valve.
  • Designed for recessed installation in an 86 x 86 mm junction box.

2. 안전 정보

기기 손상이나 부상을 방지하기 위해 다음 안전 수칙을 준수해 주십시오.

  • 설치는 해당 지역의 전기 규정 및 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
  • 온도 조절기를 설치하거나 수리하기 전에 회로 차단기에서 전원을 차단하십시오.
  • 기기를 습기, 극한의 온도 또는 직사광선에 노출시키지 마세요.
  • Ensure the power supply matches the device's requirements (230V).
  • 기기를 직접 수리하거나 개조하지 마십시오. 자격을 갖춘 서비스 담당자에게 문의하십시오.

3. 패키지 내용

패키지에 모든 구성 요소가 들어 있는지 확인하세요.

  • FIBARO MCO Home MH8-FC4 Thermostat (White)
  • 사용 설명서 (본 문서)

4. 제품 오버view

The MH8-FC4 thermostat features a sleek design with a tempered glass panel and an integrated display. The front panel includes capacitive touch buttons for various functions and a clear screen for displaying temperature, time, and operating modes.

앞쪽 view of the MCO Home MH8-FC4 Fan Coil Thermostat with display showing time and temperature.

그림 4.1: 전면 view of the MCO Home MH8-FC4 Fan Coil Thermostat. The display shows current time, room temperature, and various operational icons. Capacitive buttons are visible below the screen.

The rear of the thermostat houses the wiring terminals for power, fan control, and valve control, designed for secure and organized connections within a standard junction box.

뒤쪽 view of the MCO Home MH8-FC4 Fan Coil Thermostat showing wiring terminals and model label.

그림 4.2: 후면 view of the MCO Home MH8-FC4 Thermostat. This image displays the terminal block for electrical connections and the product label indicating the model MH8-FC-EU.

5. 설치

The MH8-FC4 thermostat is designed for recessed installation into a standard 86 x 86 mm wall junction box. Ensure that the power supply is disconnected before beginning installation.

5.1 배선도(일반)

A typical wiring setup for a 4-pipe fan coil system includes connections for live (L), neutral (N), fan speeds (low, medium, high), and valve control (heating and cooling valves). Refer to the specific wiring diagram provided with your fan coil unit and the detailed diagram in the full product manual for precise connections.

  • 전원 공급 장치: Connect the 230V AC live and neutral wires to the designated L and N terminals.
  • 팬 제어: Connect the fan speed wires (Low, Medium, High) from your fan coil unit to the corresponding terminals on the thermostat.
  • 밸브 제어: Connect the heating and cooling valve control wires to the appropriate valve terminals.

5.2 장착

  1. Ensure the junction box is properly installed and secured in the wall.
  2. Connect all necessary wires to the terminals on the rear of the thermostat as per the wiring diagram.
  3. Carefully push the wired thermostat module into the junction box.
  4. Secure the thermostat to the junction box using the provided screws.
  5. Attach the front glass panel to complete the installation.

After installation, restore power and proceed to initial setup and configuration.

6. 사용 설명서

The MH8-FC4 thermostat features a touchscreen display and capacitive buttons for easy control of your fan coil system.

6.1 기본 작업

  • 전원 켜기/끄기: Touch the power icon to turn the thermostat on or off.
  • 온도 조절: Use the up/down arrows on the display to set your desired temperature.
  • 모드 선택: Cycle through operating modes (e.g., Heat, Cool, Auto, Fan Only) by touching the mode icon.
  • 팬 속도: Adjust fan speed (Low, Medium, High, Auto) by touching the fan icon.

6.2 Z-Wave Connectivity

The MH8-FC4 thermostat supports Z-Wave technology for smart home integration. Refer to your Z-Wave gateway's instructions for adding new devices to your network. Once connected, you can control the thermostat remotely via your smart home application, including temperature settings, mode changes, and fan speed adjustments.

The thermostat also supports voice control when integrated with compatible Z-Wave gateways and voice assistants.

7. 유지관리

The MH8-FC4 thermostat requires minimal maintenance.

  • 청소: Gently wipe the glass panel with a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
  • 점검: Periodically check for any loose connections or signs of damage. If any issues are found, disconnect power and consult a qualified technician.

8. 문제 해결

If you encounter issues with your MH8-FC4 thermostat, refer to the following common problems and solutions:

문제 가능한 원인 해결책
온도 조절 장치의 전원이 켜지지 않습니다. 전원 공급이 안 됨; 배선이 잘못됨. Check circuit breaker. Verify wiring connections are secure and correct.
Fan or valve not responding. Incorrect wiring; system mode error; Z-Wave communication issue. Check wiring. Ensure correct operating mode is selected. Verify Z-Wave network status.
온도 측정값이 정확하지 않은 것 같습니다. Sensor obstruction; thermostat placed in direct draft/sunlight. Ensure no objects are blocking the sensor. Relocate if exposed to drafts or direct sunlight.
Z-Wave 네트워크에 연결할 수 없습니다. Out of range; Z-Wave gateway issue; interference. Ensure thermostat is within range of the Z-Wave gateway. Consult gateway manual for device inclusion steps. Reduce interference sources.

문제가 지속될 경우 고객 지원 센터 또는 자격을 갖춘 기술자에게 문의하십시오.

9. 사양

특징 세부 사항
상표 FIBARO (MCO Home)
모델명 MH8-FC4
색상 하얀색
재료 유리
전원 공급 장치 230 Volt AC, Wired Electric
연결 기술 지웨이브
제어 유형 Capacitive Buttons, Touch, Voice Control (via Z-Wave gateway)
디스플레이 유형 Touchscreen with Backlight
화면 크기 86 밀리미터
장착 유형 Recessed (86 x 86 mm junction box)
특정 용도 Indoor, Professional
제조업체 부품 번호 MH8-FC4 White
GTIN 04251295700212, 06928954202001

10. 보증 및 지원

For warranty information and technical support, please refer to the official FIBARO or MCO Home website, or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.

온라인 자료 및 FAQ는 제조업체의 지원 페이지에서도 확인할 수 있습니다.

© 2026 FIBARO. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.