PIX-LINK 300Mbps WiFi 리피터 사용 설명서

1. 서론

The PIX-LINK WR01 300Mbps WiFi Repeater is designed to extend the coverage and improve the signal strength of your existing Wi-Fi network. This device helps eliminate Wi-Fi dead zones, providing a more stable and faster wireless connection throughout your home or office. It supports both Repeater and AP (Access Point) modes, offering versatile connectivity options.

그림 1: 전면 view of the PIX-LINK WR01 WiFi Repeater.

2. 제품 오버view

The PIX-LINK WR01 features a compact design with integrated antennas and multiple indicator LEDs for easy status monitoring. It also includes a USB port for charging, enhancing its utility as a travel companion.

2.1. 구성 요소 및 지표

그림 2: 상세 view of the PIX-LINK WR01 components and indicators.

• 전원 LED: 장치의 전원이 켜져 있는지 여부를 나타냅니다.
• WPS LED: Illuminates during WPS connection attempts.
• 랜 LED: LAN 포트에서 활동이 있음을 나타냅니다.
• 리피터 LED: Shows the status of the repeater function.
• 180° Rotation Antennas: Adjustable antennas for optimal signal reception.
• Detachable Plug: 보관 및 휴대가 간편합니다.
• WAN 인터페이스: Port for connecting to a modem or router in AP mode.
• 재설정 버튼: 공장 기본 설정을 복원하는 데 사용됩니다.
• USB (5V/2A) Port: 외부 장치를 충전하는 데 사용됩니다.
• WPS 버튼: For quick and secure connection setup with WPS-enabled routers.
• 통풍구 : 방열을 위해.

3. 설정

The PIX-LINK WR01 is designed for easy installation. You can set it up using your smartphone, tablet, or laptop, or by utilizing the WPS function.

3.1. 초기 배치

For optimal performance, place the repeater in a location that is roughly halfway between your main router and the area where you need improved Wi-Fi coverage. Avoid placing it too close to either the router or the device you are trying to connect, as this can hinder its effectiveness.

Figure 3: Guide to optimal repeater placement for best signal extension.

3.2. 전원 켜기

Plug the PIX-LINK WR01 into a standard electrical outlet. The Power LED should illuminate, indicating the device is receiving power.

Figure 4: The PIX-LINK WR01 plugged into a power outlet.

3.3. 연결 방법

3.3.1. WPS(Wi-Fi Protected Setup) 방식

1. Ensure your main router supports WPS functionality.
2. Press the WPS button on your PIX-LINK WR01. The WPS LED will start blinking.
3. 2분 이내에 메인 라우터의 WPS 버튼을 누르세요.
4. Wait for the WPS LED on the repeater to become solid, indicating a successful connection.

3.3.2. Web Browser Method

1. Connect your computer or mobile device to the repeater's Wi-Fi network (usually named "PIX-LINK_XXXX" or similar, without a password).
2. 열기 web 브라우저를 열고 기본 IP 주소를 입력하세요(예: 192.168.10.1) 주소 표시줄에
3. Log in using the default username and password (refer to the included detailed user manual for specifics, often "admin" for both).
4. Follow the on-screen wizard to select your desired operating mode (Repeater or AP) and configure network settings.

4. 작동 모드

The PIX-LINK WR01 supports two primary operating modes:

4.1. 리피터 모드

In Repeater Mode, the device extends the coverage of an existing Wi-Fi network. It receives the wireless signal from your main router and re-broadcasts it, effectively boosting the signal to areas with poor or no coverage. This mode is ideal for eliminating Wi-Fi dead zones in large homes or offices.

4.2. AP(액세스 포인트) 모드

In AP Mode, the device transforms a wired network connection into a wireless one. You connect the repeater to your router or modem via an Ethernet cable (WAN port), and it then creates a new Wi-Fi network. This is useful for adding wireless capability to a wired-only network or creating a separate Wi-Fi network.

Figure 5: Setup diagram for AP Mode, showing wired connection to router.

5. 추가 기능

5.1. USB 충전 포트

The PIX-LINK WR01 includes a 5V/2A USB port, allowing you to charge your mobile devices. This feature makes it a convenient travel accessory, serving as both a Wi-Fi extender and a portable charger.

Figure 6: The PIX-LINK WR01 functioning as a portable charger.

6. 유지관리

To ensure the longevity and optimal performance of your PIX-LINK WR01, consider the following maintenance tips:

• 과열을 방지하기 위해 장치를 통풍이 잘 되는 곳에 보관하십시오.
• 극한의 온도, 습도 또는 직사광선에 장치를 노출하지 마십시오.
• 기기 외부를 부드럽고 마른 천으로 닦으십시오. 액체 세척제나 스프레이형 세척제는 사용하지 마십시오.
• 제조업체의 펌웨어 업데이트를 주기적으로 확인하세요. website to ensure the device has the latest features and security patches.

7. 문제 해결

This section addresses common issues you might encounter with your PIX-LINK WR01.

7.1. When to Reset

You may need to reset your device in the following situations:

• When changing between different operating modes (e.g., Repeater to AP).
• If you mistakenly enter the wrong password and fail to connect to the Internet.
• If you are unable to access the login page to change settings.
• When moving the device to a new location where the IP address conflicts with the previous network.

7.2. 재설정 방법

공장 초기화를 수행하려면:

1. Ensure the Power LED is solid (device is powered on).
2. Locate the Reset hole on the device.
3. Using a thin object like a toothpick or paperclip, press and hold the Reset button for approximately 10 seconds until the WPS LED turns off.
4. Release the button. The device will restart, and the LAN/WAN LED will illuminate once the reset is complete.

Figure 7: Visual guide for resetting the device.

7.3. Poor Signal or No Connection

• 배치 확인: Ensure the repeater is placed optimally between your router and the desired coverage area, not too close to either. Refer to Section 3.1.
• Verify Router Connection: Confirm that your main router is functioning correctly and broadcasting a strong signal.
• 재구성: If issues persist, try reconfiguring the repeater using the web browser method to ensure all settings are correct.

8. 사양

9. 보증 및 지원

All PIX-LINK products come with a 12개월 보증. If you encounter any issues with your device during this period, please contact PIX-LINK customer support. Our dedicated support team is available to assist you with troubleshooting and technical inquiries, aiming to respond within 24 hours.

Please note that the Wi-Fi Repeater extends Wi-Fi coverage but does not increase the internet speed provided by your original router.