DeltaTrak 11040 전문가용 디지털 육류 온도계 사용 설명서

소개

This manual provides comprehensive instructions for the safe and effective use of your DeltaTrak 11040 Professional Digital Meat Thermometer. Designed for accuracy and durability, this waterproof thermometer is ideal for various cooking applications, including meat, liquids, deep frying, and candy making. Please read this manual thoroughly before operating the device.

이미지 설명: A DeltaTrak 11040 Professional Digital Meat Thermometer, featuring a round blue and white display unit with a digital temperature reading and a long stainless steel probe.

제품 특징

• Accurate and Fast: Instant read thermo sensor provides readings within 1 second, accurate to ±0.9°F (±0.5°C).
• IP65 방수 등급: 흐르는 물에 빠르고 쉽게 세척할 수 있습니다.
• 다중 사용: Suitable for meats, liquids, deep frying, and candy making.
• 최소/최대 메모리: Stores the lowest and highest temperature readings.
• Food Grade and Certified: Complies with FDA food code regulations and provides NIST traceable readings with automatic calibration features.
• Reduced Tip Probe: For faster response times.
• °F/°C Switchable: 화씨와 섭씨 사이를 쉽게 전환할 수 있습니다.

패키지 내용

• DeltaTrak 11040 Digital Meat Thermometer
• CR2 배터리 1개 (포함)

설정

1. 배터리 설치

The DeltaTrak 11040 thermometer comes with a CR2 battery pre-installed. If replacement is needed:

1. 온도계 뒷면에 있는 배터리 칸을 찾으세요.
2. Use a coin or small screwdriver to carefully open the battery cover.
3. CR2 배터리 1개를 삽입할 때 극성(+/-)을 올바르게 맞춰주세요.
4. 배터리 커버를 확실하게 닫으세요.

2. 초기 사용

Before first use, clean the probe with warm soapy water and rinse thoroughly. The thermometer is ready for use once the battery is installed.

작업

1. 전원 켜기/끄기

를 누르세요 전원 버튼 () once to turn the unit on. Press and hold the Power button for approximately 3 seconds to turn the unit off.

2. 체온 측정

1. 온도계를 켭니다.
2. Insert the stainless steel probe into the center of the food item, ensuring the tip is fully immersed and not touching bone or the bottom of the pan.
3. Wait for the reading to stabilize (typically within 1 second).
4. LCD 화면에 표시된 온도를 읽으세요.

메모: For best accuracy, ensure the probe is inserted deep enough into the thickest part of the food.

이미지 설명: A close-up of the thermometer's probe inserted into a piece of meat, indicating the target area for temperature measurement.

3. Min/Max Memory Function

The thermometer records the minimum and maximum temperatures measured during an operation cycle.

1. After turning the unit on, the display will show the current temperature.
2. 를 누르세요 최소/최대 버튼 once to display the maximum temperature recorded since the unit was turned on.
3. 를 누르세요 최소/최대 버튼 a second time to display the minimum temperature recorded.
4. 를 누르세요 최소/최대 버튼 a third time to return to the current temperature reading.

The Min/Max memory resets each time the thermometer is turned off and then on again.

4. Switching Between Fahrenheit and Celsius (°F/°C)

온도 단위를 변경하려면:

1. 작은 것을 찾으세요 °F/°C 스위치 배터리함 내부.
2. Open the battery cover as described in the "Battery Installation" section.
3. Use a small pointed object (like a pen tip) to slide the switch to your desired unit (°F or °C).
4. 배터리 덮개를 단단히 닫으세요.

이미지 설명: 클로즈업 view of the DeltaTrak 11040 thermometer's display, highlighting the °F/°C selectable feature and the Min/Max memory button. The display shows "72.9°F".

5. 자동 보정

The thermometer features an auto-calibration function. For NIST traceability and accurate readings, refer to the calibration procedure detailed on the product packaging or DeltaTrak's official support resources.

유지

1. 청소

The DeltaTrak 11040 is IP65 water resistant. To clean:

1. 프로브를 광고로 닦으세요amp cloth or wash under running water using mild soap.
2. 온도계 전체를 물에 담그지 마십시오.
3. 보관하기 전에 완전히 말리십시오.

이미지 설명: The DeltaTrak 11040 thermometer with water splashing around its display, illustrating its water-resistant design.

2. 보관

Store the thermometer in a clean, dry place at room temperature when not in use. Keep the probe protected to prevent damage.

3. 배터리 교체

Replace the CR2 battery when the display becomes dim or the thermometer fails to power on. Follow the "Battery Installation" steps.

문제 해결

• 디스플레이 없음/디스플레이 어두움: 배터리 설치 상태를 확인하십시오. 필요한 경우 CR2 배터리를 교체하십시오.
• 부정확한 판독: Ensure the probe is fully inserted into the food and not touching bone or the pan. Verify the °F/°C setting. If issues persist, refer to the auto-calibration instructions or contact support.
• 느린 읽기: Ensure the probe tip is clean and free of debris.

명세서

보증 및 지원

For warranty information and technical support, please visit the official DeltaTrak web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.

델타트랙 Web대지: www.델타트랙닷컴