Amazon Basics LCD 컴퓨터 모니터 스탠드 라이저 사용 설명서

1. 서론

This user manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Amazon Basics LCD Computer Monitor Free-Standing Desk Stand Riser. Designed to enhance your ergonomic workspace, this stand allows for flexible adjustment of your monitor to achieve optimal view각도와 편안함.

그림 1.1: 전면 view of the Amazon Basics LCD Computer Monitor Stand Riser.

2. 특징

• 높이 조정: Set the height of your LCD for a comfortable computing experience.
• Multi-directional Movement: With fingertip effort, raise or lower your display, pan left/right, tilt, and rotate.
• 중량 용량: Supports monitors weighing between 6-16 pounds.
• 화면 크기 호환성: Designed for screens up to 24 inches.
• 수직 높이 조정: Offers 5 inches of monitor height adjustability.
• 회전: Monitor can be used in portrait or landscape orientation (360° rotation).
• 기울기 범위 : +25/-5 degree tilt capability.
• 팬 범위 : 270° right/left pan from the base.
• VESA 호환성: Supports VESA 100 x 100 mm and 75 x 75 mm mounting patterns.
• 케이블 관리 : Integrated cable pass-through channel near the base keeps cables organized.

3. 패키지 내용

조립을 시작하기 전에 모든 구성품이 있는지 확인하십시오.

• Monitor Stand Base and Arm Assembly
• VESA 마운팅 플레이트
• Mounting Screws (various sizes for VESA 75x75mm and 100x100mm)
• Allen Key (for adjustments and assembly)

Figure 3.1: Typical components included with the monitor stand.

4. 설정 지침

1. 스탠드 준비: Place the monitor stand base on a stable, flat surface. Ensure the Allen key is accessible, often stored at the bottom of the base.
2. 모니터에 VESA 플레이트 부착: Carefully lay your monitor face down on a soft, clean surface to prevent scratches. Align the VESA mounting plate with the screw holes on the back of your monitor. Use the appropriate mounting screws (M4 or M5, depending on your monitor) to secure the plate to the monitor. Do not overtighten.
3. Mount Monitor to Stand: With the VESA plate attached to your monitor, carefully lift the monitor and slide the VESA plate onto the arm of the stand. Ensure it clicks securely into place.
4. Adjust Tension (if necessary): If the monitor sags or is too stiff to adjust, use the included Allen key to adjust the tension screws on the arm. These are typically located near the VESA plate attachment point or along the arm's pivot points. Turn clockwise to increase tension (stiffer movement) and counter-clockwise to decrease tension (looser movement).

Figure 4.1: Allen key storage on the underside of the stand base.

5. 사용 설명서

The Amazon Basics LCD Monitor Riser offers a range of adjustments for optimal view편안함:

• 높이 조정: Gently push or pull the monitor up or down to your desired height. The stand is designed to hold its position once released.
• 기울기 조정: Grasp the top and bottom edges of your monitor and gently tilt it forward or backward to achieve the perfect view잉 각도.
• 팬 조정: Rotate the entire stand base left or right on your desk for horizontal view조정 중입니다.
• 회전(세로/가로): Rotate the monitor 360 degrees to switch between landscape and portrait orientations. Ensure no cables are tangled during rotation.

Figure 5.1: Monitor on stand in landscape orientation.

Figure 5.2: Monitor on stand in portrait orientation, side view.

5.1. 공식 제품 영상

Video 5.1: An official product video demonstrating the features and adjustments of the Amazon Basics LCD Monitor Stand Adjustable Riser.

6. 유지관리

• 청소: 부드럽고 마른 천을 사용하여 스탠드를 닦으세요. 잘 지워지지 않는 얼룩은 약간amp 순한 비누를 묻힌 천을 사용하여 닦은 후 말리세요. 연마성 세제나 용제는 사용하지 마세요.
• 정기 점검: Periodically check all screws and connections to ensure they are secure. Retighten if necessary using the provided Allen key.
• 케이블 관리 : Ensure cables are routed neatly through the cable pass-through channel to prevent strain or damage.

7. 문제 해결

• 모니터가 처지거나 제대로 고정되지 않음:

  This indicates that the tension on the arm is too loose. Use the Allen key to tighten the tension screws on the arm until the monitor holds its position securely. Refer to Section 4, Step 4 for guidance.
• Monitor is Too Stiff to Adjust:

  The tension on the arm may be too tight. Use the Allen key to loosen the tension screws slightly until movement is smooth but still holds position.

• 모니터 흔들림:

  Ensure the stand is placed on a stable, flat surface. Check that all assembly screws are tightened securely, including those attaching the VESA plate to the monitor and the monitor to the stand.

• Cables are Tangled:

  Utilize the integrated cable pass-through channel at the base of the stand to route cables neatly. This prevents tangling and keeps your workspace tidy.

8. 사양

9. 보증 및 지원

This product is backed by an Amazon Basics 1-Year Limited Warranty. For detailed warranty information or technical support, please refer to the official Amazon Basics web해당 사이트를 방문하거나 아마존 고객 서비스에 직접 문의하세요.

온라인 지원: 방문하다 아마존 고객 서비스