소개
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Satco S9750 30W LED HID Replacement Light Bulb. This Hi-Pro multi-beam LED lamp is designed for industrial and commercial applications, offering high lumen output and adjustable, multi-directional light. It is a direct wire range voltage 100-277V replacement for HID, CFL, and incandescent bulbs, approved for totally enclosed fixtures.
안전 정보
- 경고: 감전 위험이 있습니다. 설치 또는 정비 전에 전원을 차단하세요.
- 공급 볼륨을 확인tage is compatible with the bulb's operating voltage(100-277V).
- 전구를 분해하거나 개조하지 마십시오. 내부에는 사용자가 수리할 수 있는 부품이 없습니다.
- This bulb is suitable for use in damp locations and approved for totally enclosed fixtures.
- Always handle the bulb by its base to avoid damaging the LED panels.
- 설치 과정의 어떤 부분이든 확실하지 않은 경우 자격을 갖춘 전기 기술자에게 문의하세요.
패키지 내용
설치를 진행하기 전에 모든 구성 요소가 있고 손상되지 않았는지 확인하세요.
- 1 x Satco S9750 30W LED HID Replacement Light Bulb
설정 및 설치
Follow these steps for proper installation of your Satco S9750 LED HID Replacement Light Bulb:
- 전원 차단: Before beginning any installation, ensure the power to the fixture is turned off at the circuit breaker.
- 오래된 전구 제거: Carefully remove the existing HID, CFL, or incandescent bulb from the fixture.
- 밸러스트 바이패스: This LED bulb requires a direct wire connection and bypasses the existing ballast. If your fixture has a ballast, it must be bypassed or removed by a qualified electrician. The bulb operates on a direct wire range voltag100-277V의 e.
- 고정물 호환성 확인: Ensure the fixture has a medium (E26) base. The minimum compartment size for enclosed fixtures is 11 inches (Length) x 8 inches (Width) x 8 inches (Depth). The lamp length is 6.37 inches, and the diameter is 3.18 inches when closed, expanding to 7.68 inches when open.
- 새 전구 설치: Screw the Satco S9750 LED bulb firmly into the medium (E26) base socket. Do not overtighten.
- 복원력 : Once the bulb is securely installed and any necessary ballast bypass is complete, restore power at the circuit breaker.
작동 지침
The Satco S9750 features adjustable light panels, allowing you to customize the beam angle for various lighting needs.
- 빔 각도 조정: The light panels can be manually adjusted and locked into place to create three distinct beam angle options:
- 360° Beam: Panels fully closed, providing a wide, omnidirectional light spread (approx. 3.2 inches width).
- 270° Beam: Panels partially open, directing light over a broader area (approx. 6.8 inches width).
- 180° Beam: Panels fully open, concentrating light in a specific direction (approx. 7.7 inches width).
- Gently move the panels to the desired position until they click or lock into place. Avoid excessive force.
유지
Satco S9750 LED 전구는 유지 보수가 거의 필요하지 않습니다.
- 청소: Ensure power is disconnected before cleaning. Use a soft, dry cloth to wipe the bulb. Do not use liquid cleaners or abrasive materials.
- 점검: 전구와 조명기구에 손상이나 연결 불량이 있는지 주기적으로 점검하십시오.
문제 해결
If your Satco S9750 LED bulb is not functioning correctly, consider the following:
- 빛 없음:
- 조명기구에 전원이 공급되는지 확인하십시오.
- Ensure the bulb is screwed in tightly to the socket.
- Verify that the ballast has been properly bypassed or removed.
- Inspect the circuit breaker for any tripped circuits.
- 깜박이는 빛:
- 전구가 소켓에 제대로 꽂혀 있는지 확인하십시오.
- 전원 공급이 안정적인지 확인하십시오.
If issues persist after performing these checks, contact customer support.
명세서
| 특징 | 사양 |
|---|---|
| 상표 | 샛코 |
| 모델 번호 | S9750 |
| 라이트 타입 | 주도의 |
| 왓tage | 30 와트 |
| HID와 동등함 | 150와트 |
| CFL Equivalent | 55와트 |
| 백열등가 | 200와트 |
| 전구베이스 | E26(중간 베이스) |
| 권tage | 100-277볼트 AC |
| 색온도 | 5000 켈빈 |
| 루멘스 | 3,900루멘 |
| 연색지수(CRI) | 80 |
| 빔 각도 | Adjustable (180°, 270°, 360°) |
| IP 등급 | IP65 |
| 작동 온도 범위 | -20°C ~ 65°C |
| 재료 | 플라스틱 |
| 인증 | ETL, RoHS, UL Listed |
| Lamp Length (closed) | 6.37인치 |
| Diameter (closed) | 3.18인치 |
| Diameter (open) | 7.68인치 |
| 품목 무게 | 4.8 온스 |
보증 및 지원
The Satco S9750 LED HID Replacement Light Bulb comes with a 5년 한정 보증.
For warranty claims, technical support, or further assistance, please contact Satco customer service through their official website or the retailer where the product was purchased. Please have your model number (S9750) and proof of purchase available when contacting support.