HITBOX ARC 200A Stick Welder (Model ARC120) Instruction Manual

1. 중요 안전 지침

Read and understand all safety warnings and instructions before operating this welding machine. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.

• 전기 충격: Welding current can kill. Do not touch live electrical parts. Wear dry, insulating gloves and protective clothing.
• 연기 및 가스: Welding produces fumes and gases. Keep your head out of the fumes. Use ventilation or exhaust to remove fumes and gases from the breathing zone.
• 아크 광선: Arc rays can injure eyes and burn skin. Wear a welding helmet with a proper shade filter. Wear protective clothing to protect skin.
• 화재 및 폭발: 용접 작업은 화재나 폭발을 일으킬 수 있습니다. 인화성 물질을 용접 구역에서 멀리하십시오. 소화기를 가까이에 비치하십시오.
• 핫 부품: Welded parts are hot. Allow them to cool before touching.
• 전자기장(EMF): Welding current creates electromagnetic fields. Consult your physician if you have a pacemaker or other medical implant.

2. 제품 오버view

The HITBOX ARC 200A Stick Welder (Model ARC120) is a portable DC inverter welding machine designed for Stick (MMA) welding. It features a compact design, digital display, and adjustable current output for various welding tasks.

2.1 구성 요소 및 제어

그림 2.1: 전면 view of the HITBOX ARC 200A Stick Welder. Shows the digital display, adjustment knob, and positive/negative terminals.

Figure 2.2: Internal components of the HITBOX ARC 200A Stick Welder, highlighting the fan, high power capacitors, LED display, adjustment knob, IGBT, strong radiator, copper transformer, negative terminal, and positive terminal.

• 디지털 디스플레이: 현재 용접 상태를 보여줍니다. amp분노.
• 조정 손잡이: 용접 전류를 설정하는 데 사용됩니다.amp시대).
• 양극 단자(+): 전극 홀더 케이블에 연결됩니다.
• 음극 단자(-): 업무 cl에 연결됩니다amp 케이블.
• 전원 스위치: Located on the rear panel, turns the machine on/off.
• 냉각 팬: Located on the rear panel, ensures proper cooling during operation.

3. 사양

Figure 3.1: Dimensions of the HITBOX ARC 200A Stick Welder. Approximately 9 inches (23cm) wide, 6 inches (15.5cm) high, and 4 inches (10cm) deep.

Figure 3.2: Illustration of the 60% duty cycle, indicating the machine's operational capacity over a 10-minute period.

4. 설정

4.1 풀기 및 검사

Carefully remove the welding machine and all accessories from the packaging. Inspect for any damage that may have occurred during shipping. Report any damage to your supplier immediately.

• Welding Machine (ARC120)
• 케이블이 있는 전극 홀더
• 작업 Clamp 케이블 포함
• Power Cord (NEMA L6-30P)

Figure 4.1: The HITBOX ARC 200A Stick Welder shown with its included electrode holder, work clamp그리고 전원 코드.

4.2 전기 연결

This machine operates on 220V AC power. Ensure your power supply meets the requirements. The power cord is equipped with a NEMA L6-30P plug. If your outlet is different, consult a qualified electrician for proper installation or use an appropriate adapter.

• Connect the power cord to a suitable 220V AC outlet.
• Ensure the power switch on the rear of the machine is in the "OFF" position before plugging in.

4.3 케이블 연결

전극 홀더와 작업대를 연결하세요amp cables to the appropriate terminals on the front panel of the welding machine.

1. 전극 홀더 케이블의 커넥터를 삽입하십시오. 긍정적 (+) terminal and twist to secure.
2. Insert the connector of the work clamp 에 케이블 부정적인 (-) terminal and twist to secure.
3. 작업 cl 첨부amp 공작물이나 용접 테이블에 단단히 고정하여 양호한 전기 접촉을 확보하십시오.

5. 사용 설명서

5.1 용접 준비

• 안전 장비: Always wear appropriate personal protective equipment (PPE), including a welding helmet with a suitable shade, welding gloves, flame-resistant clothing, and safety shoes.
• 작업 영역: Ensure your welding area is clean, well-ventilated, and free from flammable materials.
• 전극 선택: Choose the correct type and size of electrode for your material and desired weld.

5.2 용접 공정

1. Turn on the welding machine using the power switch on the rear panel.
2. Adjust the welding current using the adjustment knob on the front panel. The digital display will show the selected amperage. Refer to electrode manufacturer recommendations for appropriate current settings.
3. Insert the electrode into the electrode holder.
4. Position the work clamp securely on the workpiece.
5. 전극을 공작물에 가볍게 접촉시킨 후 재빨리 살짝 들어 올려 아크를 발생시키십시오.
6. Maintain a consistent arc length and travel speed to achieve a quality weld.
7. After welding, turn off the machine and allow the workpiece to cool.

그림 5.1: 예amples of various weld beads, illustrating different appearances of completed welds.

6. 유지관리

Regular maintenance ensures the longevity and safe operation of your welding machine. Always disconnect the power supply before performing any maintenance.

• 청소: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the ventilation openings.
• 케이블 검사: 용접 케이블, 전극 홀더 및 작업 클립을 정기적으로 점검하십시오.amp 손상, 절단 또는 연결 불량이 있는지 확인하십시오. 손상된 부품은 즉시 교체하십시오.
• 저장: 용접기를 사용하지 않을 때는 깨끗하고 건조한 곳에 보관하십시오.

7. 문제 해결

8. 보증 및 지원

For warranty information or technical support, please contact HITBOX customer service. Keep your purchase receipt as proof of purchase.

Visit the official HITBOX store for more products and support: HITBOX Store