소개
The 3M PELTOR X2A Earmuffs are designed to provide hearing protection in environments with moderate to high noise levels. These earmuffs are part of the X-Series, representing an advancement in hearing conservation technology. Proper use and maintenance are essential for optimal performance and protection.
This manual provides instructions for the correct setup, operation, and maintenance of your 3M PELTOR X2A Earmuffs. Please read this manual thoroughly before using the product.
안전 정보
중요한: Failure to follow these instructions may result in reduced hearing protection and potential hearing damage.
- Always wear hearing protection in noisy environments.
- Ensure earmuffs are properly fitted and worn for continuous protection.
- Inspect earmuffs regularly for damage, such as cracks in the cups or worn ear cushions. Replace damaged parts immediately.
- Clean earmuffs as instructed in the Maintenance section to ensure hygiene and performance.
- Do not modify the earmuffs. Unauthorized modifications may compromise their protective capabilities.
설정
To ensure effective hearing protection, proper adjustment of the earmuffs is crucial.
- 머리띠 조정: Hold the earmuffs by the headband. Extend the headband fully by sliding the cups downwards.
- 컵 포지션: Place the ear cups over your ears, ensuring they completely cover your outer ears.
- Tighten Headband: Slide the ear cups upwards along the headband until the headband rests comfortably on the top of your head and the ear cups create a firm, but not overly tight, seal around your ears.
- 씰 확인: Ensure no hair, eyeglasses, or other objects interfere with the seal between the ear cushions and your head. A proper seal is vital for maximum noise reduction.
Image: The 3M PELTOR X2A Earmuffs, featuring a black headband and yellow and black ear cups. This image illustrates the overall design and appearance of the product, showing the adjustable headband and the cushioned ear cups designed for hearing protection.
작동 지침
Once properly fitted, the 3M PELTOR X2A Earmuffs are ready for use. They are passive hearing protectors and do not require batteries or complex operation.
- Wear the earmuffs continuously in noisy environments.
- Avoid removing the earmuffs, even for short periods, as this significantly reduces overall protection.
- If you experience discomfort or a sensation of reduced protection, re-adjust the earmuffs to ensure a proper seal.
유지
Regular cleaning and inspection will prolong the life of your earmuffs and ensure continued effective protection.
- 청소: Clean the ear cups and cushions with mild soap and water. Use a soft cloth. Do not immerse the earmuffs in water.
- 건조: 귀마개를 보관하거나 다시 사용하기 전에 완전히 말리십시오.
- 점검: Periodically check the ear cushions for cracks, hardening, or other signs of wear. Inspect the headband for damage. Replace worn or damaged parts with genuine 3M PELTOR replacement parts.
- 저장: 귀마개는 직사광선과 극한 온도 변화를 피해 깨끗하고 건조한 곳에 보관하십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Reduced noise reduction | Improper fit; Worn ear cushions; Interference with seal (e.g., eyeglasses, hair) | Re-adjust earmuffs for a snug fit; Replace ear cushions; Remove interfering objects. |
| 착용 중 불편함 | Headband too tight or loose; Incorrect positioning | Adjust headband for comfortable pressure; Ensure ear cups are centered over ears. |
| Earmuffs appear damaged | Physical impact; Material degradation | Inspect for cracks or tears. Replace damaged components or the entire unit if integrity is compromised. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | X2A |
| 상표 | 3M 펠터 |
| 소음 감소 등급(NRR) | 24데시벨 |
| Single Number Rating (SNR) | 31 dB (from part number) |
| 부품 번호 | PELTOR X2 HEADBAND SNR 31dB |
| 색상 | 노랑/검정 |
| 스타일 | Over-the-head, Uncorded |
| 재료 | 펠터 |
| 품목 무게 | 1.1파운드(약 0.5kg) |
| 제품 치수 | 28.7 x 9.3 x 8.7인치(약 72.9 x 23.6 x 22.1cm) |
| 필요한 배터리 | 아니요 |
| 첫 번째 이용 가능 날짜 | 6년 2014월 XNUMX일 |
참고 : 사양은 예고없이 변경 될 수 있습니다.
보증 및 지원
3M PELTOR products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the official 3M web해당 웹사이트를 방문하거나 3M 고객 서비스 센터에 직접 문의하십시오.
온라인 리소스: www.3m.com/peltor
고객 서비스: Refer to your regional 3M contact information for assistance.