셰파흐 BCH3300-100PB 가솔린 예초기 사용 설명서

중요한 안전 정보

This section outlines critical safety precautions that must be observed during the operation, maintenance, and storage of your Scheppach BCH3300-100PB Gasoline Brush Cutter. Failure to follow these instructions may result in serious injury or property damage.

• Always use protective equipment such as safety shoes, hearing protection, safety glasses, and gloves.
• Ensure no persons or animals are nearby while operating the brush cutter. Maintain a safe distance from others.
• Always keep the brush cutter pointed away from your body and others when in operation.
• Ensure the brush cutter is checked for proper operation before each use. Inspect for loose parts, damage, or fuel leaks.
• Read and follow the operating manual carefully before using the brush cutter. Understand all controls and functions.
• Do not operate the machine in wet conditions or in areas with flammable liquids or gases.
• 예초기는 어린이의 손이 닿지 않는 건조하고 안전한 장소에 보관하십시오.

제품 끝view

The Scheppach BCH3300-100PB is a versatile 2-in-1 gasoline-powered tool designed for both brush cutting and grass trimming. It features a powerful 2-stroke engine and anti-vibration technology for comfortable operation.

주요 특징:

• 430 / 255 mm Cutting Width: Provides efficient work for various tasks.
• Powerful 32.6 cm³ / 2-Stroke Engine: 신뢰할 수 있는 성능을 제공합니다.
• 포함된 액세서리: Comes with a 3-tooth blade, line spool, and two spare spools.
• 쉬운 제어: Equipped with a stop switch and throttle lock for safe operation.
• 진동 방지 기술: Reduces fatigue during extended use.
• 어깨 끈: Enhances comfort and balance during operation.
• Tap-Automatic Line Extension: Simplifies line feeding for grass trimming.
• Adjustable Bike Handle: Designed for ergonomic and comfortable handling.

설정

집회

The Scheppach BCH3300-100PB is designed for easy assembly and disassembly for convenient storage and transport.

1. Connect the Shaft: Align the two sections of the shaft and secure them firmly using the quick-release mechanism. Ensure it clicks into place.
2. 핸들바를 부착하세요: Mount the adjustable bike handle onto the shaft and tighten the securing bolts. Adjust the angle for comfortable operation.
3. Install Guard and Cutting Attachment: Depending on whether you are using the brush cutter blade or the grass trimmer spool, attach the appropriate guard and cutting tool. Ensure all fasteners are securely tightened.
4. 어깨 끈 부착: Connect the shoulder strap to the designated attachment point on the shaft. Adjust the strap length for balanced and comfortable carrying.

연료 공급

This brush cutter uses a gasoline-oil mixture. Always use fresh, clean fuel and the correct mixing ratio as specified in the engine manual (typically 2-stroke oil mixed with unleaded gasoline).

• 연료를 보충하기 전에 엔진이 식었는지 확인하십시오.
• Mix fuel in a separate, approved container.
• 연료 혼합액을 흘리지 않도록 조심스럽게 연료 탱크에 부으십시오.
• Securely close the fuel cap after refueling.

작동 지침

엔진 시동

1. 예초기를 평평하고 안정적인 표면에 놓으십시오.
2. (냉간 시동 시) 초크를 작동시키십시오.
3. 연료가 보일 때까지 프라이머 벌브를 여러 번 누릅니다.
4. 엔진이 시동될 때까지 스타터 코드를 단단히 당기세요.
5. 일단 시동이 걸리면 초크를 서서히 풀어주세요.
6. Allow the engine to warm up for a few moments before beginning work.

Using as Brush Cutter (Blade)

For cutting thicker brush, weeds, and small saplings, use the 3-tooth blade.

• Ensure the blade is securely attached and the guard is in place.
• Hold the brush cutter firmly with both hands using the bike handle.
• Maintain a stable stance and swing the blade in a controlled arc.
• Avoid striking hard objects like rocks or metal.

Using as Grass Trimmer (Line Spool)

For trimming grass and lighter vegetation, use the line spool with the Tap-Automatic function.

• Ensure the line spool is correctly installed and the guard is in place.
• Hold the trimmer firmly and maintain a comfortable working posture.
• To extend the line, gently tap the trimmer head on the ground while the engine is running at full throttle.
• Trim grass by swinging the head in a side-to-side motion.

유지

Regular maintenance ensures the longevity and optimal performance of your brush cutter.

청소

• After each use, clean the cutting head, guard, and engine housing to remove grass, dirt, and debris.
• 브러시 또는 d를 사용하십시오.amp cloth. Avoid using high-pressure water directly on the engine.
• Ensure cooling fins are clear of obstructions for proper engine cooling.

Blade and Spool Replacement

• Always turn off the engine and disconnect the spark plug wire before performing any maintenance on the cutting head.
• 블레이드 교체: Use the provided tools to loosen the retaining nut. Carefully remove the old blade and install the new one, ensuring it is oriented correctly. Tighten the nut securely.
• 낚싯줄 스풀 교체: Follow the instructions specific to the Tap-Automatic spool for winding new line or replacing the entire spool. Ensure the line is properly fed through the eyelets.

Spark Plug and Air Filter

• Inspect the spark plug regularly. Clean or replace if fouled or worn.
• Clean the air filter frequently, especially in dusty conditions. A clogged air filter can reduce engine performance.

문제 해결

This section provides solutions to common issues you might encounter with your brush cutter.

명세서

Detailed technical specifications for the Scheppach BCH3300-100PB.

보증 및 지원

For warranty claims, technical support, or spare parts, please contact Scheppach customer service or your authorized dealer.

보증을 위해 구매 증빙서류로 구매 영수증을 보관하세요.

더 자세한 정보와 연락처는 셰파흐 공식 웹사이트에서 확인하실 수 있습니다. web사이트나 이를 통해 Scheppach Brand Store on Amazon.