Amazon Basics High-Security Cross-Cut Shredder

소개

구매해주셔서 감사합니다asing the Amazon Basics High-Security Cross-Cut Shredder. This manual provides important information regarding the safe operation, maintenance, and troubleshooting of your new shredder. Please read it thoroughly before use and retain it for future reference.

안전 지침

부상이나 손해의 위험을 줄이기 위해 다음 안전 수칙을 준수해 주십시오.

• 종이 투입구에 손가락, 헐렁한 옷, 머리카락, 장신구가 들어가지 않도록 하십시오.
• 어린이와 애완동물을 분쇄기에 가까이 두지 마십시오.
• Unplug the shredder when not in use or before moving/cleaning.
• 금속 물체, 접착 라벨 또는 젖은 종이는 파쇄하지 마십시오.
• Do not exceed the maximum sheet capacity (7-8 sheets of 70gsm paper).
• Avoid continuous operation for more than 3 minutes to prevent overheating. Allow 30 minutes cool-down time after continuous use.
• 전원 코드가 손상된 경우 파쇄기를 작동하지 마십시오.

제품 끝view

Familiarize yourself with the components of your shredder:

• Shredder Head: Contains the cutting blades and motor.
• 서류 접수란: Where paper and credit cards are inserted.
• 제어 스위치: For selecting ON, OFF, and REVERSE modes.
• 쓰레기통: Collects shredded material. Features a clear window to monitor fill level.
• Overheat Indicator LED: Illuminates when the shredder needs to cool down.

이미지: 앞면 view of the Amazon Basics Cross-Cut Shredder, showing the shredder head, paper entry, and waste bin with clear window.

설정

1. 풀다: 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
2. 모으다: Place the shredder head securely onto the waste bin. Ensure it is properly seated to allow the shredder to operate.
3. 위치: Place the shredder on a flat, stable surface. Ensure the power cord can reach a standard electrical outlet without strain.
4. 전원 연결: 전원 코드를 적합한 콘센트에 꽂으세요.

Image: The shredder head lifted off the waste bin, illustrating how the two main components separate for setup and emptying.

작동 지침

파쇄 종이

1. Set the control switch to the "ON" (Auto) position. The shredder is now in standby mode.
2. Insert up to 7-8 sheets of paper (70gsm) straight into the paper entry slot. The shredder will automatically start and stop once the paper has passed through.
3. For thicker paper or fewer sheets, the shredder will adjust automatically.

신용카드 파쇄

1. Set the control switch to the "ON" (Auto) position.
2. Insert one credit card at a time into the center of the paper entry slot. The shredder will automatically shred the card.

용지 걸림 제거

1. If a paper jam occurs, set the control switch to the "REVERSE" position. This will reverse the shredding mechanism to clear the jam.
2. If the jam persists, switch to "OFF", unplug the unit, and carefully remove the jammed paper manually.
3. Once cleared, plug the unit back in and resume shredding.

Image: The shredder actively processing paper, demonstrating the paper entry slot in use.

유지

쓰레기통 비우기

When the waste bin is full, the shredder will stop operating. The clear window allows you to monitor the fill level.

1. Set the control switch to "OFF" and unplug the shredder.
2. 파쇄기 헤드를 쓰레기통에서 조심스럽게 들어 올리세요.
3. Empty the shredded material from the bin into a recycling container.
4. 파쇄기 헤드를 쓰레기통에 단단히 다시 끼우십시오.
5. Plug the shredder back in to resume operation.

Image: The empty waste bin of the shredder, highlighting its capacity and design for easy emptying.

분쇄기 청소

• 분쇄기를 청소하기 전에는 항상 전원을 뽑으십시오.
• 분쇄기의 외부를 부드러운 천으로 닦으세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• Regularly oil the shredder blades (e.g., every 30 minutes of cumulative shredding or once a month) using shredder oil sheets or liquid shredder oil applied to a sheet of paper. This helps maintain performance and prolong the life of the blades.

문제 해결

명세서

• 모델: AU864XA
• 조각 유형: 샛길
• 시트 용량 : 7-8 sheets (70gsm paper)
• 파쇄 크기 : 0.48 x 4.68cm
• 보안 수준: P3
• 연속 실행 시간: 3 분
• 쿨다운 시간: 30 분
• 빈 용량: 15.5리터
• 치수(길이 x 너비 x 높이): 32.5 x 19.7 x 39cm(12.8 x 7.7 x 15.3인치)
• 무게: 3.72kg(8.2파운드)
• 재료: Plastic and Metal (Steel)

처분

When disposing of the shredder, please follow local regulations for electronic waste. The shredder contains electronic components and should not be disposed of with general household waste.