AntMiner S9 사용 설명서

1. 제품 오버view

The AntMiner S9 is a high-performance ASIC (Application-Specific Integrated Circuit) miner designed for Bitcoin mining. It features a hash rate of approximately 13.5 TH/s and is known for its power efficiency. This manual provides essential information for the proper setup, operation, and maintenance of your AntMiner S9.

이미지 1.1: 전면 view of the AntMiner S9, showcasin컴팩트한 디자인과 통합 냉각 팬이 특징입니다.

2. 안전 정보

• Ensure the power supply unit (PSU) is connected to a stable power source.
• Do not connect more than one PSU to the same hash board to prevent potential damage and instability.
• Operate the miner within the specified temperature range of 0 °C to 40 °C.
• 기기를 물, 습기 및 높은 습도로부터 멀리하십시오.
• Do not attempt to open or modify the miner, as this may void the warranty and pose safety risks.
• Ensure adequate ventilation around the miner to prevent overheating.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• AntMiner S9 ASIC Bitcoin Miner
• 전원 공급 장치(PSU)
• 전원 코드

4. 설정 가이드

4.1 전원 연결

The AntMiner S9 requires TEN 6-pin PCI-e connectors for 12V DC input. These connectors must be supplied by a very stable power source.

1. Locate the three hash boards, each requiring three 6-pin PCI-e connectors.
2. Locate the controller board, which requires one additional 6-pin PCI-e connector.
3. Connect all TEN 6-pin PCI-e connectors from the power supply unit to the respective ports on the miner.
4. 모든 연결이 안전한지 확인하세요.
5. Connect the power cord from the PSU to a suitable electrical outlet.

중요 참고 사항:

• Bitmain recommends the APW3 power supply for 205-264V outlets. For voltages lower than 205V, use the EVGA 1600 G2.
• Power consumption figures are dependent on PSU efficiency, ambient operating temperature, and power meter accuracy.

Image 4.1: Front panel of the AntMiner S9, showing the Ethernet port, IP Report button, SD card slot, and status indicator lights.

4.2 네트워크 연결

The AntMiner S9 connects to your network via an Ethernet cable.

1. Connect one end of an Ethernet cable to the ETH port on the AntMiner S9.
2. 이더넷 케이블의 다른 쪽 끝을 라우터 또는 네트워크 스위치에 연결하십시오.
3. Once connected, the miner will automatically obtain an IP address via DHCP.

5. 사용 설명서

5.1 액세스 Web 관리 포털

The AntMiner S9 features a built-in web management portal, eliminating the need for a separate host computer for configuration.

1. Ensure the miner is powered on and connected to your network.
2. To find the miner's IP address, you can use an IP scanner tool on your network or press the "IP Report" button on the miner. Hold the button for 5 seconds until you hear a beep. The IP address will be reported to the IP Reporter tool (available from Antminer support).
3. 열기 web 동일한 네트워크에 연결된 컴퓨터의 브라우저.
4. Enter the miner's IP address into the browser's address bar and press Enter.
5. You will be prompted for login credentials. The default username and password are typically "root" and "root" (or "admin" and "admin"). Refer to the latest Antminer documentation for default credentials.
6. Once logged in, you can configure mining pool settings, monitor performance, and update firmware.

이미지 5.1: 측면 view of the AntMiner S9, illustrating its robust casing and fan placement.

5.2 Configuring Mining Pools

내에서 web management portal, navigate to the "Miner Configuration" or "Pool Settings" section to enter your mining pool details. You will typically need to provide:

• 수영장 URL: The address of your chosen mining pool.
• Worker Name: Your worker name, usually in the format username.workername.
• 비밀번호: The password for your worker (often 'x' or a specific password set on the pool).

It is recommended to configure at least two mining pools (primary and backup) for continuous operation.

6. 유지관리

• 먼지 제거: Regularly inspect and clean the cooling fans and heat sinks to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air for effective cleaning.
• 환경 제어: Maintain a stable operating environment with good airflow and within the recommended temperature range (0 °C to 40 °C).
• 펌웨어 업데이트: Periodically check the official Antminer website for firmware updates. Keeping the firmware updated can improve performance and stability.
• 전원 공급 장치 점검: Ensure the power supply unit is functioning correctly and providing stable voltage.

7. 문제 해결

For more complex issues, refer to the official Antminer support resources or contact customer support.

8. 사양

9. 보증 및 지원

This product is covered by the manufacturer's warranty. For any issues covered under the manufacturer warranty, please handle them directly with the manufacturer. The seller's return policy may involve restocking fees if troubleshooting and technical support are not sought prior to a return.

For technical assistance, troubleshooting, or warranty claims, please contact the manufacturer or your seller's support channels. It is often possible to resolve issues quickly without needing to return the unit.

Legal Disclaimer: By purchasing this product, you agree to seek troubleshooting and technical support from the seller and/or manufacturer before attempting a return. Returns without seeking technical support and troubleshooting may be subject to restocking fees.