Atrix 730333

Atrix HEPA Filter for Express ESD Vacuum

모델: 730333 - 사용 설명서

1. 이상view

The Atrix HEPA Filter (Model 730333) is designed for use with the Atrix Express ESD Vacuum. This high-efficiency particulate air (HEPA) filter is engineered to capture extremely fine particles, ensuring a cleaner environment and protecting sensitive equipment. Each filter offers 99.97% efficiency at 0.3 microns, making it effective against very fine dust, color toner, allergens, mold spores, and other ultra-fine particulates. These filters are disposable and come in a convenient 2-pack.

2. 안전 정보

  • Always ensure the vacuum is unplugged before attempting to replace the filter.
  • Handle used filters with care, especially if they have collected hazardous materials like toner or fine dust.
  • Do not attempt to clean or reuse disposable HEPA filters. Their efficiency relies on the integrity of the filter media.
  • Dispose of used filters according to local regulations for waste disposal.

3. 설정 및 설치

Follow these steps to properly install the Atrix HEPA filter into your Express ESD Vacuum:

  1. 준비: Ensure the Atrix Express ESD Vacuum is turned off and unplugged from the power source.
  2. 필터 구획 접근: Locate the filter compartment on your vacuum. Refer to your vacuum's user manual for specific instructions on how to open this compartment.
  3. 오래된 필터 제거: Carefully remove the old, used filter. It is recommended to place the old filter directly into a sealed bag to prevent dust from escaping.
  4. 새 필터 삽입: Take a new Atrix HEPA Filter from the 2-pack. Observe the "TOP" marking and arrow on the filter. Insert the filter into the compartment, ensuring the arrow points upwards or in the direction indicated by your vacuum's design for proper airflow.
  5. 보안 구획: Close and secure the filter compartment according to your vacuum's instructions. Ensure it is properly sealed to maintain vacuum efficiency and prevent dust leakage.
  6. 전원 켜기: Plug in the vacuum and turn it on to confirm proper operation.
Two Atrix HEPA filters for Express ESD Vacuum, showing the top with an arrow indicating airflow direction and 'HEPA FILTER' label.

Figure 1: Atrix HEPA Filters. This image displays two Atrix HEPA filters. Each filter is a rectangular, light-colored unit with a circular opening on the top surface. A label on the top of each filter reads 'TOP' with an arrow, and 'HEPA FILTER', indicating the correct orientation for installation and the filter type.

4. 작동 원리

Once installed, the Atrix HEPA filter functions as a critical component of your Express ESD Vacuum's filtration system. Air drawn into the vacuum passes through the HEPA filter, which traps microscopic particles. The filter's design ensures that 99.97% of particles as small as 0.3 microns are captured, preventing them from being recirculated into the air. This is particularly important in environments requiring strict dust control, such as those handling sensitive electronics, fine powders, or allergen-prone areas.

5. 유지관리

Regular replacement of the HEPA filter is essential to maintain the optimal performance and filtration efficiency of your Atrix Express ESD Vacuum.

  • 교체 빈도: The frequency of filter replacement depends on the usage intensity and the type of debris being vacuumed. For heavy use or when vacuuming very fine or hazardous materials, more frequent replacement may be necessary. Generally, replace the filter when you notice a decrease in suction power or when the filter appears visibly dirty.
  • 처분: Atrix HEPA filters are disposable. Do not attempt to wash, clean, or reuse them. After removal, immediately place the used filter into a sealed bag and dispose of it according to local waste disposal guidelines.

6. 문제 해결

문제가능한 원인해결책
흡입력 감소Clogged or dirty HEPA filter.Replace the HEPA filter with a new one (Model 730333).
진공청소기 배기구에서 나오는 먼지Filter not properly installed or damaged filter.Ensure the filter is correctly seated and the compartment is sealed. Inspect the filter for damage; replace if necessary.
작동 중 이상한 냄새가 납니다Filter has absorbed strong odors or is excessively dirty.HEPA 필터를 교체하십시오.

7. 사양

  • 모델: 730333
  • 상표: Atrix
  • 필터 유형: 헤파
  • 능률: 99.97% at 0.3 Microns
  • 재사용성: 일회용의
  • 단위 수: 2.0개입 (팩당)
  • 품목 무게: 1.33파운드(2개입 기준)
  • 호환성: Atrix Express ESD Vacuum

8. 보증 및 지원

For specific warranty information regarding your Atrix HEPA filters or the Atrix Express ESD Vacuum, please refer to the documentation provided with your vacuum cleaner or visit the official Atrix website. For technical support, replacement parts, or any inquiries, please contact Atrix customer service directly.

Atrix Official Web대지: www.atrix.com

© 2026 Atrix. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.