ASUS X99-DELUXE II ATX 마더보드 사용 설명서

1. 소개 및 이상view

This manual provides essential information for the installation, configuration, and maintenance of your ASUS X99-DELUXE II ATX motherboard. Designed for Intel Core i7 X-Series Processors, this motherboard integrates advanced features for system optimization and connectivity.

주요 특징은 다음과 같습니다.

• 차세대 연결성: Equipped with onboard U.2 and M.2 slots, offering 32Gbps PCIe bandwidth, 3x3 802.11ac Wi-Fi, and USB 3.1 Type C/Thunderbolt 3 support.
• ASUS Aura RGB: Features controllable onboard RGB lighting and a 4-pin strip header, allowing synchronization with other Aura-capable ASUS hardware for personalized aesthetics.
• SafeSlot Technology: Reinvented, strengthened PCIe slots utilize an insert-molding process to bind the slot to fortifying metal, enhancing retention and shearing resistance for heavy graphics cards.
• Fan Xpert 4를 이용한 5방향 최적화: Provides one-click system tuning, elevating customized cooling with auto PWM/DC fan detection on all headers, supporting high-amperage fans and water-cooling pumps via software and UEFI.
• 크리스탈 사운드 3: Delivers gaming-grade audio with enhanced clarity, featuring a power pre-regulator for clean power delivery, noise isolation design, and premium audio components.

그림 1.1: 이상view of the ASUS X99-DELUXE II ATX Motherboard.

2. 안전 정보

마더보드를 다룰 때는 항상 다음 안전 수칙을 준수하십시오.

• 구성 요소를 만지기 전에 벽면 콘센트에서 전원 코드를 분리하세요.
• Wear an anti-static wrist strap or frequently touch a grounded object to prevent electrostatic discharge (ESD) damage.
• 민감한 부분을 만지지 않으려면 구성품의 가장자리를 잡으세요.
• 과열을 방지하려면 PC 케이스 내부의 적절한 환기를 확보하세요.

3. 패키지 내용

마더보드 패키지에 모든 품목이 들어 있는지 확인하세요.

• ASUS X99-DELUXE II Motherboard
• 사용자 설명서
• DVD 지원
• ASUS Q-Shield
• CPU 설치 도구
• Serial ATA 6.0Gb/s 케이블(8)
• ASUS 3T3R 듀얼 밴드 Wi-Fi 이동형 안테나 (Wi-Fi 802.11a/b/g/n/ac 호환)
• ASUS 2-Way/3-Way SLI bridge
• ThunderboltEX 3 Card
• ThunderboltEX 3 cable
• miniDP to DP cable
• Hyper M.2 X4 Mini Card
• M.2 X4 bracket
• M.2 나사 패키지
• Fan Extension Card (3 x 4-pin fan out)
• Fan Extension Card cable
• Fan Extension Card screw package
• Thermistor cables (3)
• Q-connector
• RGB LED 연장 케이블

4. 마더보드 레이아웃 및 구성 요소

Familiarize yourself with the key components and connectors on your ASUS X99-DELUXE II motherboard.

4.1. CPU Socket (LGA2011-v3)

Figure 4.1: Close-up of the LGA2011-v3 CPU Socket.

The LGA2011-v3 socket supports Intel Core i7 X-Series Processors. Ensure correct orientation and careful handling during processor installation.

4.2. DDR4 DIMM 슬롯

The motherboard features eight DDR4 DIMM slots, supporting quad-channel memory configurations up to 128GB at speeds of 2133MHz and higher (via overclocking). Refer to the manual for recommended memory configurations.

4.3. PCIe Slots with SafeSlot

Multiple PCIe slots are available for expansion cards, including graphics cards. The primary PCIe slots are reinforced with ASUS SafeSlot technology for enhanced durability and retention of heavy components.

4.4. M.2 and U.2 Connectors

The motherboard includes integrated M.2 and U.2 connectors for high-speed NVMe SSDs, utilizing PCIe 3.0 x4 bandwidth for optimal storage performance. The Hyper M.2 X4 Mini Card and M.2 X4 bracket are provided for additional M.2 device support.

4.5. SATA 6.0Gb/s Ports

Eight SATA 6.0Gb/s ports are available for connecting traditional SATA storage devices such as HDDs and SSDs. Use the provided Serial ATA cables for connection.

4.6. I/O 패널

Figure 4.2: Rear I/O Panel Connectors.

The rear I/O panel provides various connectivity options, including USB 3.1 Type C, USB 3.1 Type A, USB 2.0, Gigabit Ethernet, Wi-Fi antenna connectors, and audio jacks. The ThunderboltEX 3 Card expands connectivity with Thunderbolt 3 ports.

5. 설정 및 설치

메인보드와 구성품을 올바르게 설치하려면 다음 단계를 따르십시오.

5.1. 프로세서 설치

1. Open the CPU socket lever(s).
2. CPU의 금색 삼각형이 소켓의 삼각형과 일치하는지 확인하면서 프로세서를 소켓에 조심스럽게 맞춰 장착하십시오.
3. CPU를 억지로 끼우지 말고 조심스럽게 소켓에 넣으세요.
4. Close the socket lever(s) to secure the CPU.
5. 제조업체의 지침에 따라 CPU 쿨러를 설치하세요.

5.2. 메모리(RAM) 설치

1. DIMM 슬롯 양쪽 끝에 있는 클립을 엽니다.
2. 메모리 모듈을 슬롯에 맞춰서 모듈의 홈이 슬롯의 키와 일치하는지 확인합니다.
3. 클립이 제자리에 고정될 때까지 메모리 모듈의 양쪽 끝을 단단히 누릅니다.

5.3. 저장 장치 설치

For M.2 SSDs, insert the module into the M.2 slot and secure it with the provided M.2 screw. For SATA drives, connect them to the SATA ports using the Serial ATA cables.

5.4. 확장 카드 설치

Insert PCIe expansion cards (e.g., graphics cards) into the appropriate PCIe slots. Ensure they are fully seated and secured with the case's retention mechanism.

5.5. 전원 연결

Connect the 24-pin ATX power connector and the 8-pin/4-pin CPU power connector from your power supply to the corresponding headers on the motherboard.

5.6. 주변기기 연결하기

Connect your keyboard, mouse, monitor, and other peripherals to the appropriate ports on the rear I/O panel. Install the Wi-Fi antennas for wireless connectivity.

6. 마더보드 작동

Once your system is assembled, you can configure and optimize its performance.

6.1. BIOS/UEFI 구성

UEFI BIOS에 접근하려면 버튼을 누르십시오. 델 key during system startup. Here you can configure boot options, system settings, and advanced features.

6.2. System Tuning with 5-Way Optimization

Utilize ASUS's 5-Way Optimization software for one-click system tuning, including CPU overclocking, power saving, digital power control, and customized fan settings via Fan Xpert 4.

6.3. RGB Lighting Control with ASUS Aura

Use the ASUS Aura software to customize the onboard RGB lighting and synchronize it with compatible RGB LED strips connected to the motherboard's RGB headers.

6.4. Audio Configuration with Crystal Sound 3

The integrated Crystal Sound 3 audio solution provides high-quality audio. Install the necessary audio drivers from the supporting DVD or ASUS website for full functionality and customization options.

7. 유지관리

정기적인 유지관리는 마더보드의 수명과 최적의 성능을 보장하는 데 도움이 됩니다.

7.1. 드라이버 및 BIOS 업데이트

정기적으로 ASUS 지원을 확인하세요 website for the latest drivers and BIOS updates. Keeping your system software up-to-date can improve stability, performance, and compatibility.

7.2. 시스템 청소

Ensure your PC case and motherboard components are free from dust accumulation. Use compressed air to gently clean fans, heatsinks, and other areas to maintain efficient cooling.

8. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.

8.1. System Not Booting / No Display

• Verify all power connections (24-pin ATX, 8-pin CPU, graphics card PCIe power) are securely seated.
• Ensure memory modules are correctly installed in the DIMM slots.
• Check that the CPU is properly seated in its socket.
• If available, consult the Q-Code display on the motherboard for diagnostic codes, which can indicate the source of the issue. Refer to the user manual for Q-Code definitions.

8.2. USB Port Malfunctions

If USB ports are not functioning correctly or disconnect randomly, ensure all necessary chipset drivers are installed and updated. Verify that the BIOS is updated to the latest version. If issues persist, try disabling USB Legacy Support in the BIOS or testing with different USB devices.

8.3. Slow Boot Times

Slow boot times can be influenced by various factors. Ensure your operating system is installed on a fast storage device (e.g., NVMe M.2 SSD). Check BIOS settings for 'Fast Boot' options and enable them if desired. Outdated drivers or excessive startup programs can also contribute to slow boot times.

8.4. BIOS Reset (Clear CMOS)

If system instability or incorrect BIOS settings prevent normal operation, you may need to clear the CMOS. Locate the CLRTC (Clear CMOS) jumper or button on the motherboard and follow the instructions in the full user manual to reset BIOS settings to default.

9. 기술 사양

10. 보증 및 지원

For detailed warranty information, please refer to the warranty card included in your product package or visit the official ASUS support web사이트. ASUS website also provides comprehensive technical support, FAQs, and driver downloads.

온라인 지원: 방문하다 www.asus.com/support/ for the latest information, drivers, and troubleshooting guides.