소개
This manual provides comprehensive instructions for the safe and effective assembly, operation, and maintenance of your Stagg SPS-0620 BK Speaker Stands. Please read this manual thoroughly before use and retain it for future reference.
패키지 내용
조립을 진행하기 전에 모든 구성품이 있는지 확인하십시오.
- 2 x Stagg SPS-0620 BK Speaker Stands
- 운반용 가방 1개
- 2 x Locking Pins
설정 및 조립
Follow these steps to correctly assemble your speaker stands:
- 구성 요소 풀기: Carefully remove all items from the transport bag and packaging.
- 다리 뻗기: Place the stand on a flat, stable surface. Gently pull the tripod legs outwards until they are fully extended and locked into position. Ensure the base is wide and stable.
- 높이 조정: Loosen the height adjustment knob on the main pole. Carefully extend the upper pole to the desired height. The stand is adjustable from 44.5 inches (113 cm) to 68.9 inches (175 cm).
- Secure Height with Locking Pin: Once the desired height is reached, align the hole in the upper pole with one of the five adjustment holes in the lower pole. Insert the provided locking pin completely through both holes.
- Tighten Adjustment Knob: Firmly tighten the height adjustment knob to secure the upper pole in place. The locking pin provides additional safety.
- 두 번째 스탠드에 대해서도 동일하게 반복하십시오. Follow the same steps for the second speaker stand.
Image: An assembled Stagg SPS-0620 BK speaker stand with its tripod base extended and the main pole adjusted to a medium height. This illustrates the stand's stable configuration.
작동 지침
Proper operation ensures stability and safety for your audio equipment.
- 스피커 배치: Carefully lift your speaker and place it onto the top mounting pole of the stand. Ensure the speaker is centered and stable.
- 하중 용량: Each stand is designed to hold a maximum load of 110 lbs (50 kg). Do not exceed this weight limit to prevent damage or instability.
- 안정성 확인: Before leaving the stands unattended, gently test their stability by applying light pressure to the speaker. Ensure there is no wobbling or tipping.
- 케이블 관리 : Route speaker cables safely to avoid tripping hazards and to prevent them from pulling on the stand or speaker.
유지
Regular maintenance will prolong the life of your speaker stands.
- 청소: Wipe down the stands with a soft, dry cloth. For stubborn dirt, a slightly damp 천을 사용하여 세척 후 바로 말리세요. 연마성 세척제나 용제는 사용하지 마세요.
- 점검: Periodically inspect all knobs, pins, and connecting parts for wear or damage. Ensure all screws and bolts are tight.
- 저장: When not in use, collapse the stands and store them in the provided transport bag in a dry, cool place to protect them from dust and moisture.
문제 해결
문제가 발생하면 다음의 일반적인 해결책을 참조하세요.
- 받침대가 불안정합니다.
- 삼각대 다리가 완전히 펴지고 고정되었는지 확인하십시오.
- 스탠드가 평평하고 수평인 표면에 놓여 있는지 확인하십시오.
- Check that the height adjustment knob is tightened and the locking pin is fully inserted.
- Ensure the speaker weight does not exceed the 110 lbs (50 kg) load capacity.
- 높이 조절이 어렵습니다.
- Loosen the height adjustment knob completely before attempting to adjust.
- Ensure the locking pin is removed before adjusting height.
- Clean any dirt or debris from the inner and outer poles.
명세서
| 상표 | Stagg |
| 모델 번호 | SPS-0620 BK |
| 재료 | 금속(분말 코팅) |
| 색상 | 검은색 |
| 높이 조절 가능 | 44.5인치 - 68.9인치(113cm - 175cm) |
| Load Capacity (per stand) | 110파운드(50kg) |
| 기본 유형 | 삼각대 |
| 연결 부품 | 폴리프로필렌 |
| 제품 무게 (스탠드당) | Approx. 6 lbs (2.7 kg) - based on 12 lbs for two stands |
| 한국어: | 882030225376 |
보증 정보
Stagg provides a 1년 보증 against manufacturer defects for the SPS-0620 BK Speaker Stands. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accidents, modifications, or unauthorized repairs. Please retain your proof of purchase for warranty claims.
고객 지원
For technical assistance, warranty claims, or further inquiries regarding your Stagg SPS-0620 BK Speaker Stands, please contact Stagg customer support through their official website or your retailer. Provide your model number (SPS-0620 BK) and proof of purchase when contacting support.