Godox X2T-S TTL Wireless Flash Trigger Transmitter for Sony Cameras User Manual

소개

The Godox X2T-S is a TTL wireless flash trigger transmitter designed for Sony cameras, featuring 2.4G wireless transmission and Bluetooth connectivity. It supports a range of advanced flash functions including TTL autoflash, 1/8000s high-speed sync, multiflash mode, and manual mode. This manual provides detailed instructions for setting up, operating, and maintaining your X2T-S transmitter.

Figure 1: Godox X2T-S Wireless Flash Trigger Transmitter, showing the top and front controls.

설정

1. Installing on Camera

1. Ensure your camera and the X2T-S transmitter are powered off.
2. Slide the X2T-S hotshoe onto your camera's hotshoe mount.
3. Secure the transmitter by rotating the hotshoe locking mechanism until it is firmly attached.
4. Power on the X2T-S transmitter and your camera.

Figure 2: The X2T-S transmitter mounted securely on a Sony camera's hotshoe.

2. 전원 켜기 / 끄기

Locate the power switch on the side of the unit. Slide it to the "ON" position to power on the transmitter. Slide it to "OFF" to power off.

그림 3: 측면 view of the X2T-S, highlighting the power switch and other controls.

3. Bluetooth Connection (GodoxPhoto App)

1. Download the "GodoxPhoto" app from your mobile device's app store (compatible with iPhone/Android phones or iPad/Android tablets).
2. 모바일 기기에서 Bluetooth를 활성화하세요.
3. On the X2T-S, press and hold the 메뉴 button to enter the menu, then navigate to the Bluetooth settings and ensure it is enabled.
4. Open the GodoxPhoto app and follow the on-screen instructions to connect to your X2T-S transmitter.
5. Once connected, you can control flash mode, power output, modeling light mode, and other settings directly from the app.

작동 지침

1. 기본 제어 및 디스플레이

The X2T-S features an LCD screen for clear display of settings, along with 5 group setting buttons (A, B, C, D, E) and 3 function buttons (MODE, MENU, SET, ALL) for quick adjustments. The control wheel allows for easy value changes.

그림 4: 클로즈업 view of the X2T-S LCD display and control buttons.

2. Wireless X System (2.4G)

The built-in Godox 2.4G Wireless X System provides a reliable operating distance of up to 100 meters. To avoid signal interference, ensure the channels and wireless IDs of the master (X2T-S) and slave units (Godox flashes) are set to the same values.

• 여러 떼: The X2T-S supports 5 groups (A, B, C, D, E) for controlling multiple flash units independently.
• 채널: 32 channels are available to prevent interference.
• 무선 ID: Access to 99 wireless ID settings further limits interference from other systems.

3. 플래시 모드 및 기능

• TTL 자동 플래시: 정확한 노출을 위해 플래시 출력을 자동으로 조절합니다.
• 수동 모드: 플래시 출력량을 정밀하게 제어할 수 있습니다.
• 멀티플래시 모드: 창의적인 효과를 위해 빠른 속도로 여러 번 섬광을 발생시킵니다.
• 고속 동기화(HSS): Enables flash synchronization at shutter speeds up to 1/8000s.
• 플래시 노출 보정(FEC): Adjusts flash output relative to the camera's metered exposure.
• TCM 기능: Converts TTL flash values into manual power output values, allowing for quick transitions between automatic and manual control.
• 모델링 엘amp 제어: 모델링 l 조정amp settings of compatible Godox flashes.
• AF Assist Light: The X2T-S features an AF assist light that uses visible light to aid camera autofocus in low-light conditions.

유지

• 기기를 건조하게 유지하십시오. 젖은 손으로 만지거나 물에 담그지 마십시오.
• Avoid sudden temperature changes, as this can cause condensation.
• 부드럽고 마른 천으로 기기를 닦으세요. 강한 화학 물질이나 용제는 사용하지 마세요.
• Store the device in a cool, dry place away from direct sunlight and excessive heat.
• Protect the hotshoe contacts from dust and damage.
• The X2T-S uses a USB-C connection for firmware updates, which is more reliable than MicroUSB. Keep the port clean.

문제 해결

• Flash not triggering:
  • Ensure both the X2T-S and the flash unit(s) are powered on.
  • Verify that the channels and wireless IDs on the transmitter and receiver (flash unit) are identical.
  • 두 기기의 배터리 잔량을 확인하세요.
  • Ensure the flash unit is within the operating range (up to 100 meters).
  • Confirm the X2T-S is securely mounted on the camera's hotshoe.
  • If using multiple flashes, ensure they are assigned to the correct groups and enabled.
• Bluetooth 연결 문제:
  • Make sure Bluetooth is enabled on both the X2T-S and your mobile device.
  • Restart both the X2T-S and your mobile device.
  • Ensure the GodoxPhoto app is up to date.
  • Try unpairing and re-pairing the device in your mobile device's Bluetooth settings.
• 일관되지 않은 플래시 출력:
  • Check for any obstructions between the transmitter and receiver.
  • Ensure the flash mode (TTL/Manual) is set correctly for your shooting scenario.
  • Verify that flash exposure compensation is not set to an unintended value.

명세서

보증 및 지원

For information regarding warranty coverage, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official Godox web최신 지원 자료 및 연락처 정보를 확인할 수 있는 사이트입니다.