CHANZON 3mm RGB Multicolor Fast Blinking LED Diode Lights Instruction Manual

1. 소개 및 이상view

This manual provides instructions for the CHANZON 3mm RGB Multicolor Fast Blinking LED Diode Lights. These LEDs feature a multi-color fast change (Red, Green, Blue) with a luminous intensity of 3000-5000mcd and a 30-degree viewing angle. They are designed for various electronic projects and applications requiring dynamic lighting effects.

The package includes 100 pieces of 3mm round top, clear transparent LEDs, suitable for through-hole mounting.

2. 제품 특징

Multi-Color Fast Change: Automatically cycles through Red, Green, and Blue colors.
고휘도 : Luminous intensity of 3000-5000mcd.
넓은 View각도: 30 degrees for broad light distribution.
표준 크기: 3mm diameter, round top, clear transparent lens.
낮은 전력 소모: Operates at 3V - 3.2V DC with a current of 20 mA.
다양한 용도: Ideal for DIY PCB board circuits, Arduino, Raspberry Pi, hobby projects, science experiments, and general electronics.

3. 상자 안에 무엇이 들어있나요?

100 x CHANZON 3mm RGB Multicolor Fast Blinking LED Diodes

4. 사양

모델 번호	100F3T-YT-KUAISHAN
LED 유형	3mm Round Top, Clear Transparent, RGB Multicolor Fast Blinking
포워드볼tag전자(Vf)	3V - 3.2V 직류
순방향 전류(If)	20mA
광도	3000-5000mcd
View잉 각도	30도
색온도	5000 Kelvin (approximate white point during color cycling)
작동 온도	(Not specified, typical for LEDs is -20°C to +80°C)
치수	3mm diameter (refer to dimension diagram for detailed measurements)
무게	0.317 ounces (for the package of 100)

Figure 1: Detailed dimensions of the 3mm LED diode.

5. 설정 지침

Proper setup is crucial for the correct operation and longevity of your LEDs. Follow these steps:

극성을 확인하세요: Each LED has two leads. The longer lead is the Anode (+) 그리고 더 짧은 쪽이 음극입니다.-). Ensure correct polarity when connecting to a power source.
전류 제한 저항: LEDs require a current limiting resistor in series to prevent damage from excessive current. For a 5V supply, a 220Ω to 270Ω resistor is typically recommended. For a 3V-3.2V supply, a resistor may not be strictly necessary if the supply is precisely regulated, but it is always good practice to include one to protect the LED.
연결: Connect the Anode (+) of the LED to the positive terminal of your power supply (via a current limiting resistor). Connect the Cathode (-) to the negative (ground) terminal of your power supply.
테스트: Before final integration, test the LED with the appropriate voltage and resistor to ensure it functions correctly.

A close-up image of a 3mm RGB fast blinking LED diode, showing its clear lens and two leads. Figure 2: CHANZON 3mm RGB Fast Blinking LED Diode.

6. 사용 설명서

Once properly connected to a power source within the specified voltage range (3V-3.2V DC) and with a suitable current limiting resistor, the LED will automatically begin its fast blinking, multi-color changing sequence. No external control signals are required for the color change or blinking effect.

The LED will cycle through various combinations of Red, Green, and Blue, creating a dynamic light display. The speed of the color change is inherent to the LED's internal circuitry and cannot be adjusted externally.

데모 영상

Video 1: A demonstration of CHANZON 3mm and 5mm LED diode lights in different colors, showcasing their operation.

Color Examp레

A single 3mm LED diode emitting a bright red light in a dark environment. — 적색광 출력

A single 3mm LED diode emitting a bright green light in a dark environment. — 녹색광 출력

A single 3mm LED diode emitting a bright blue light in a dark environment. — Blue Light Output

A single 3mm LED diode emitting a mixed RGB light, showing multiple colors simultaneously. — Mixed RGB Light Output

7. 유지관리

These LEDs are designed for long-term, maintenance-free operation under normal conditions. To ensure optimal performance and lifespan:

깨끗하게 유지하십시오: Ensure the LED lens is free from dust and debris to maintain maximum light output. Use a soft, dry cloth for cleaning if necessary.
오버볼륨을 피하세요tage/Overcurrent: 항상 지정된 볼륨 사용tage and a current limiting resistor. Exceeding these limits will significantly shorten the LED's lifespan or cause immediate failure.
조심스럽게 다루십시오: Avoid bending the leads excessively or applying strong mechanical force to the LED body, as this can damage internal components.
저장: Store unused LEDs in a dry, cool environment, away from direct sunlight and static electricity.

8. 문제 해결

문제	가능한 원인	해결책
LED가 켜지지 않습니다.	극성이 잘못되었습니다. No power supply or insufficient voltage. 연결에 결함이 있습니다. LED is damaged.	Check and correct the Anode (+) and Cathode (-) connections. Verify power supply is active and provides 3V-3.2V DC. 모든 배선의 연결 상태를 점검하여 단단히 고정되었는지 확인하십시오. Replace the LED with a new one.
LED is dim or flickers inconsistently.	불충분한 전류 또는 볼륨tage. Resistor value is too high. 연결 상태가 좋지 않습니다.	Ensure power supply is stable and within recommended voltage. Check resistor value; consider a lower value if current is too low (but do not exceed 20mA). 모든 연결 상태를 다시 확인하십시오.
LED burns out quickly.	No current limiting resistor. Resistor value is too low, leading to overcurrent. 과도한 볼륨tage.	Always use a current limiting resistor. Verify resistor value is appropriate for your supply voltage (e.g., 220-270Ω for 5V). 전원 공급량 확인tage does not exceed 3.2V DC for the LED.

9. 보증 및 지원

CHANZON products are manufactured to high-quality standards. For any issues or support, please refer to your purchase platform or contact CHANZON customer service directly. Please retain your proof of purchase for warranty claims.

For more information and additional products, visit the official CHANZON store: 아마존에서 CHANZON 스토어를 방문하세요.

CHANZON 100F3T-YT-KUAISHAN