HyperX Savage DDR4 Memory Module User Manual

소개

This manual provides essential information for the installation, operation, and maintenance of your HyperX Savage DDR4 memory modules. The HyperX Savage DDR4 memory is designed to complement Intel's 2, 4, 6, or 8 core processors, offering enhanced performance for tasks such as video editing, 3D rendering, gaming, and AI processing. These modules feature speeds up to 3000MHz and latencies of CL15, optimized for Intel's 100 series chipset and X99 chipset motherboards, supporting easy overclocking via XMP profiles.

이미지: 앞면 view of the HyperX Savage DDR4 memory module, showcasing its black heat spreader with the HyperX logo and Savage DDR4 branding.

패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

• 2 x HyperX Savage DDR4 Memory Modules (8GB each, 16GB Kit)

설정 및 설치

Before installing the memory modules, ensure your system is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

1. 준비

1. 호환성 검사 : Confirm that your motherboard supports DDR4 DIMM memory modules and the specified speed (3000MHz). Refer to your motherboard's manual for details.
2. 전원 끄기 : 컴퓨터를 완전히 끄고 전원 케이블을 분리하세요.
3. 열린 사건: Open your computer's side panel to access the motherboard.

2. 모듈 설치

1. DIMM 슬롯 찾기: Identify the DDR4 DIMM slots on your motherboard. Consult your motherboard manual for the correct slot configuration for dual-channel memory.
2. 열린 클립: Gently push down the retention clips at both ends of the DIMM slot.
3. 정렬 모듈: Hold the memory module by its edges, avoiding contact with the gold pins. Align the notch on the module with the key in the DIMM slot.
4. 모듈 삽입: Apply even pressure to both ends of the module until it seats firmly into the slot and the retention clips snap into place. Do not force the module.
5. 반복하다: Install the second memory module into the corresponding slot as indicated by your motherboard manual.

이미지: 각도 view of the HyperX Savage DDR4 memory module, showing the heat spreader design and the gold contact pins.

3. 설치 후

1. 사건 종결: 컴퓨터 케이스의 측면 패널을 다시 부착하세요.
2. 전원 다시 연결: Plug the power cable back into your computer and power it on.

작동 지침

After physical installation, it is important to configure your system's BIOS/UEFI to utilize the full potential of your HyperX Savage DDR4 memory modules.

Enabling XMP Profile

HyperX Savage DDR4 memory modules come with built-in Intel XMP (Extreme Memory Profile) 프로files. 이 프로files are optimized for Intel 100 series chipsets and X99 motherboards, allowing for easy overclocking without manual timing adjustments.

1. BIOS/UEFI에 접속하세요: 시스템 시작 중에 지정된 키(일반적으로)를 반복해서 누르십시오. 델, F2, F10, 또는 F12) to enter your motherboard's BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
2. XMP 설정 찾기: Navigate to the memory or overclocking section within the BIOS/UEFI. Look for an option related to 'XMP', 'DOCP', 'A-XMP', or 'Memory Profile'.
3. Pro 활성화file: Select the XMP profile (usually 'Profile 1' or 'Enabled') to automatically configure the memory to its rated speed (3000MHz) and timings (CL15) at 1.35V.
4. 저장 및 종료: 변경 사항을 저장하고 BIOS/UEFI를 종료하십시오. 새 메모리 설정이 적용된 상태로 시스템이 다시 시작됩니다.

If your system does not support XMP, the memory will operate at a default JEDEC speed, typically 2133MHz or 2400MHz, depending on your motherboard and CPU.

유지

HyperX Savage DDR4 memory modules are designed for durability and reliability. Minimal maintenance is required to ensure optimal performance and longevity.

• 깨끗하게 유지하십시오: 컴퓨터 케이스 내부를 주기적으로 청소하여 메모리 모듈 및 기타 부품에 먼지가 쌓이는 것을 방지하십시오. 압축 공기를 사용하여 먼지를 부드럽게 제거하십시오.
• 적절한 취급: 메모리 모듈을 다룰 때는 항상 가장자리를 잡고 금 접점이나 집적 회로를 만지지 않도록 하세요.
• 온도 조절: Ensure adequate airflow within your computer case to maintain optimal operating temperatures for all components, including memory.

문제 해결

If you encounter issues after installing your HyperX Savage DDR4 memory, consider the following troubleshooting steps:

• 시스템이 부팅되지 않음:
  • Ensure the memory modules are fully seated in their slots and the retention clips are locked.
  • Verify that your motherboard supports the installed memory type and speed.
  • Try booting with only one module installed to identify a potentially faulty module.
• Incorrect Speed Detected:
  • Access your BIOS/UEFI settings and ensure the XMP profile 활성화되어 있습니다.
  • Update your motherboard's BIOS/UEFI to the latest version, as this can improve memory compatibility and stability.
• 시스템 불안정 또는 충돌:
  • 메모리 진단 도구(예: Windows 메모리 진단 또는 MemTest86)를 실행하여 오류를 확인하세요.
  • 전원 공급 장치(PSU)가 모든 구성 요소에 충분하고 안정적인 전력을 공급하는지 확인하세요.
  • Check for proper cooling within your system to prevent overheating.

명세서

보증 및 지원

HyperX Savage DDR4 memory modules are backed by a lifetime warranty, ensuring long-term reliability and peace of mind. Free technical support is also available to assist with any questions or issues you may encounter.

For warranty claims or technical assistance, please visit the official HyperX support web사이트를 방문하거나 고객 서비스에 문의하세요. 보증 확인을 위해 구매 증빙 자료를 보관하세요.

HyperX Support: www.hyperx.com/support