1. 서론
This manual provides essential information for the safe installation, operation, and maintenance of your CCEI Piccolo PIMT series power supply for pool projectors. The Piccolo PIMT series includes models such as PIMT31 (100W), PIMT33 (300W), and PIMT37 (600W), all operating at 230/12V. This device is designed to power pool projectors safely and efficiently.
Please read this manual thoroughly before installation and use to ensure proper function and to prevent potential hazards.
Figure 1: CCEI Piccolo PIMT Power Supply Unit, top view. This image shows the compact design and the rotary switch for operation.
2. 안전 지침
경고: Electrical installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- 설치, 유지관리 또는 문제 해결을 수행하기 전에 항상 전원을 분리하세요.
- Ensure the power supply is installed in a dry, well-ventilated area, away from direct sunlight and excessive heat.
- The device is equipped with a waterproof on/off switch, but the main unit should not be submerged or exposed to direct water spray.
- The safety transformer complies with the NF EN61558 standard, ensuring safe operation when installed correctly.
- 최대 와트를 초과하지 마십시오tage rating of the specific model (e.g., 100W for PIMT31, 300W for PIMT33, 600W for PIMT37).
- Use only original CCEI parts and accessories for replacement or repair.
3. 설정 및 설치
The CCEI Piccolo PIMT power supply is designed for easy installation. Follow these steps carefully:
- 설치: Select a suitable location for mounting the power supply unit. Use the provided mounting screws and plugs to securely attach the unit to a vertical surface. Ensure the location allows for adequate ventilation and access for wiring.
- Power Connection (230V AC Input):
- 회로 차단기에서 주 전원 공급 장치가 꺼져 있는지 확인하십시오.
- Connect the 230V AC input power cable to the designated terminals on the power supply unit. Refer to the wiring diagram inside the unit cover for correct polarity.
- 모든 연결 부분을 단단히 고정하세요.
- Projector Connection (12V AC Output):
- Connect the 12V AC output cables from the power supply to your pool projector(s).
- Utilize the provided cable glands to ensure a watertight seal where cables enter and exit the unit.
- 총 와트를 확인하십시오tage of all connected projectors does not exceed the maximum capacity of your Piccolo PIMT model.
- 최종 점검: Double-check all wiring connections for security and correctness. Ensure all covers are properly closed and sealed.
Figure 2: CCEI Piccolo PIMT Power Supply, showing connection points. This view highlights the input/output terminals and the waterproof switch.
4. 사용 설명서
Once the power supply is correctly installed and wired, operating it is straightforward:
- 전원 켜기: Restore power to the unit at the main circuit breaker.
- Activate Projectors: Use the waterproof on/off switch located on the unit to turn your pool projectors ON or OFF. Rotate the switch to the 'ON' position to activate the projectors.
- 전원 끄기 : To turn off the projectors, rotate the switch to the 'OFF' position. For extended periods of non-use or maintenance, it is recommended to disconnect power at the main circuit breaker.
5. 유지관리
Regular maintenance ensures the longevity and safe operation of your CCEI Piccolo PIMT power supply.
- 청소: 부드러운 천으로 장치 외부를 주기적으로 청소하십시오.amp 천을 사용하십시오. 연마성 세제나 용제를 사용하지 마십시오. 청소하기 전에 제품의 전원을 끄십시오.
- 검사: Annually inspect all wiring connections for tightness and signs of corrosion or damage. Check cable glands for proper sealing.
- 통풍: Ensure that the ventilation openings (if any) are clear of debris to prevent overheating.
- 전문가 확인: It is recommended to have a qualified electrician inspect the unit and its connections every few years.
6. 문제 해결
If you encounter issues with your CCEI Piccolo PIMT power supply, refer to the following table:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Projectors do not turn ON. |
|
|
| Unit makes unusual noise or smells burnt. |
|
|
| Intermittent projector operation. |
|
|
If the problem persists after attempting these solutions, contact CCEI customer support or a qualified electrician.
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 제조업체 | 한국정보통신기술협회 |
| 모델 시리즈 | Piccolo PIMT (PIMT31, PIMT33, PIMT37) |
| 입력 Voltage | 230V 교류 |
| 출력 볼륨tage | 12V 교류 |
| Power Output (PIMT31) | 100와트 |
| Power Output (PIMT33) | 300와트 |
| Power Output (PIMT37) | 600와트 |
| 안전 기준 | NF EN61558 |
| 특징 | Waterproof On/Off Switch, Cable Glands, Mounting Screws |
| 품목 무게 | 1.5kg |
| ASIN | B019YDRZ38 |
| 첫 번째 가능한 날짜 | 21년 2020월 XNUMX일 |
8. 보증 및 지원
CCEI products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official CCEI web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
For technical support, spare parts, or service inquiries, please contact your authorized CCEI dealer or visit the CCEI official web연락처 정보 사이트.