다이나디오 에밋 M10 북쉘프 스피커 사용 설명서

소개

Thank you for choosing the DYNAUDIO Emit M10 Bookshelf Speakers. The M10 is the most compact model in the Emit range, designed to provide high-end audio performance. These speakers feature a 28 mm soft dome tweeter and a 14 cm MSP (Magnesium Silicate Polymer) mid/bass driver, coupled with a 1st order crossover. The Emit M10 is engineered for easy integration with various amplifiers, offering a 6 ohm impedance and an expertly tuned bass-reflex cabinet for impressive low-frequency response.

This manual provides essential information for the proper setup, operation, and maintenance of your new speakers to ensure optimal performance and longevity.

중요한 안전 정보

• Read these instructions thoroughly before operating the product.
• 이 지침을 향후 참고용으로 보관하세요.
• 제품과 사용 설명서에 있는 모든 경고에 주의하십시오.
• 모든 지시를 따르세요.
• 이 기기를 물 근처에서 사용하지 마십시오.
• 마른 천으로만 닦으십시오.
• 환기구를 막지 마십시오. 제조업체의 지침에 따라 설치하십시오.
• 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음을 포함)와 같은 열원 근처에 설치하지 마십시오. amp열을 생성하는 발전기.
• 제조사가 지정한 부속품/액세서리만 사용하세요.
• 모든 서비스는 자격을 갖춘 서비스 담당자에게 의뢰하십시오. 전원 코드나 플러그가 손상되었거나, 액체가 쏟아졌거나, 물체가 기기에 떨어졌거나, 기기가 비나 습기에 노출되었거나, 정상적으로 작동하지 않거나, 떨어졌을 때와 같이 기기가 어떤 식으로든 손상된 경우 서비스가 필요합니다.

패키지 내용

Carefully unpack your DYNAUDIO Emit M10 speakers and verify that all items are present:

• DYNAUDIO Emit M10 Bookshelf Speakers (Pair)
• Grills (Pair)
• 사용 설명서(본 문서)

누락되거나 손상된 품목이 있는 경우 즉시 판매점에 문의하십시오.

설정

스피커 배치

최적의 음질을 위해서는 스피커를 올바르게 배치하는 것이 매우 중요합니다. 다음 지침을 참고하십시오.

• 벽으로부터의 거리: Bookshelf speakers generally benefit from being placed a short distance from the rear wall to allow the bass-reflex port to function correctly and prevent excessive bass. Experiment with distances from 6 inches to 2 feet (15-60 cm).
• 키: Position the speakers so that the tweeters are approximately at ear level when you are seated in your primary listening position. This often means placing them on dedicated speaker stands or sturdy shelves.
• 스테레오 트라이앵글: For a stereo setup, place the speakers and your listening position to form an equilateral triangle. The distance between the speakers should be roughly equal to the distance from each speaker to your listening position.
• 토인: Experiment with angling the speakers slightly inward towards your listening position (toe-in). This can improve imaging and soundstag집중하세요.

이미지: 앞면 view of the white DYNAUDIO Emit M10 Bookshelf Speaker with the protective grill attached.

이미지: 앞면 view of the white DYNAUDIO Emit M10 Bookshelf Speaker, showing the tweeter and mid/bass driver without the grill.

에 연결 Amp리퍼

The DYNAUDIO Emit M10 speakers are passive speakers and require an external amplifier for operation. Follow these steps to connect your speakers:

1. 전원 끄기 : 귀하의 것을 확인하십시오 amp앰프를 연결하기 전에 전원을 끄고 전원 콘센트에서 플러그를 뽑으십시오.
2. 스피커 케이블: Use high-quality speaker cables. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of the speaker wires. Twist the bare strands tightly.
3. 극성: It is critical to connect the speakers with correct polarity. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal (red) on your amplifier. Similarly, connect the negative (-) terminal (black) on the speaker to the negative (-) terminal (black) on your amplifier. Incorrect polarity will result in poor sound quality, particularly in bass response.
4. 보안 연결: Unscrew the binding posts on the back of the speaker and amplifier, insert the bare wire or banana plug, and tighten securely. Ensure no stray wire strands are touching other terminals, which could cause a short circuit.

이미지: 후면 view of the white DYNAUDIO Emit M10 Bookshelf Speaker, highlighting the bass-reflex port and the speaker wire binding posts.

스피커 작동하기

Once your speakers are properly connected to an amplifier, you can begin enjoying your audio system.

• 전원 켜기: 플러그를 꽂고 켭니다. amp리퍼.
• 볼륨 조절: 로 시작하세요 amplifier's volume control at its lowest setting and gradually increase it to a comfortable listening level.
• 침입 기간: Like many high-fidelity audio components, your speakers may benefit from a "break-in" period. This typically involves 50-100 hours of normal use, during which the drivers will loosen up and the sound quality may improve further.
• 그릴: The included grills protect the speaker drivers. You may choose to use them or remove them for a slightly different aesthetic and potentially a subtle change in sound, though the acoustic impact is generally minimal.

유지

To ensure the longevity and optimal performance of your DYNAUDIO Emit M10 speakers, follow these maintenance guidelines:

• 청소: 스피커 캐비닛은 부드럽고 마른 보풀 없는 천으로 정기적으로 먼지를 제거해 주세요. 잘 지워지지 않는 얼룩은 가볍게 두드려 제거해 주세요.ampen the cloth with water, but avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• 그릴: The speaker grills can be gently cleaned with a soft brush or a vacuum cleaner with a brush attachment.
• 직사광선과 열을 피하세요: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can cause discoloration or damage to the cabinet and drivers.
• 수분: Keep the speakers away from excessive moisture or humidity.
• 운전자 보호: 스피커 드라이버(트위터와 우퍼)를 직접 만지지 마십시오. 손상될 수 있습니다.

문제 해결

스피커에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

• 소리 없음:
  • 확인하십시오 amp앰프는 전원이 켜져 있고 올바르게 연결되어 있습니다.
  • 양쪽 스피커 케이블 연결을 모두 확인하세요. amp앰프와 스피커의 접촉이 확실하고 극성이 올바른지 확인하십시오.
  • 올바른 입력 소스가 선택되었는지 확인하십시오. amp리퍼.
  • Confirm the volume is turned up on the amp리퍼.
• 왜곡된 소리:
  • 볼륨 레벨을 줄이세요 amp앰프. 스피커를 과도하게 구동하면 왜곡이 발생할 수 있습니다.
  • 스피커 케이블 연결부에 느슨한 가닥이나 단락이 있는지 확인하십시오.
  • 확인하십시오 amplifier's power output is suitable for the speakers (refer to specifications).
  • 오디오 소스에 왜곡이 있는지 확인하세요.
• 약한 저음:
  • Verify correct speaker polarity (+ to + and - to -) for both speakers. Incorrect polarity will cause bass cancellation.
  • Experiment with speaker placement, moving them closer to a wall can sometimes increase bass response.
• 불규칙적인 소리tage / Imaging Issues:
  • Ensure speakers are placed symmetrically and at equal distances from the listening position.
  • Adjust speaker toe-in.

If the problem persists, consult your retailer or qualified service personnel.

명세서

Image: Diagram illustrating the dimensions of the black DYNAUDIO Emit M10 Bookshelf Speaker.

보증 및 지원

보증 정보

Your DYNAUDIO Emit M10 Bookshelf Speakers are covered by a FIVE YEAR MANUFACTURER DEFECT WARRANTY. 본 보증은 정상적인 사용 환경에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 서류를 보관해 주십시오.

For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official DYNAUDIO web대지.

고객 지원

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact your authorized DYNAUDIO retailer or visit the official DYNAUDIO support web추가 지원은 사이트를 참조하세요.

Please have your product model number (EMIT 10) and proof of purchase ready when contacting support.