1. 서론
The TAKSTAR SGC-698 is a high-quality stereo condenser microphone designed for enhanced audio recording with DSLR cameras, camcorders, and other compatible devices. It is ideal for photography, interviews, and various recording applications, providing clear and stable sound. This manual provides essential information for the proper setup, operation, and maintenance of your SGC-698 microphone.
주요 특징:
- Utilizes standard XY stereo microphone techniques for clear and stable sound positioning.
- Integrated +10dB sensitivity switch, suitable for various sound intensity recordings.
- Built-in low-cut filter switch to effectively reduce ambient noise.
- Anti-Radio Frequency Interference (RFI) protection technology to minimize signal interference.
- Standard 3.5mm mini-plug stereo output signal for broad compatibility.
2. 설정
2.1 배터리 설치
The SGC-698 microphone requires one CR2032 3V button cell battery for operation. Ensure the battery is inserted with the correct polarity.
- Locate the battery compartment cover, typically at the rear or bottom of the microphone unit.
- Rotate the cover counter-clockwise to unlock and remove it.
- CR2032 배터리의 양극(+) 부분이 위를 향하도록 삽입하십시오.
- Replace the cover and rotate it clockwise to lock it securely.
Figure 1: Battery compartment for CR2032 3V button cell.
2.2 마이크 장착
The SGC-698 features a standard hot shoe connector for easy attachment to cameras and camcorders.
- Slide the microphone's hot shoe mount into your camera's hot shoe slot.
- 마이크 거치대의 잠금 휠을 조여 마이크를 제자리에 고정하십시오.
Figure 2: Microphone mounted on a DSLR camera.
2.3 장치에 연결하기
Connect the microphone to your recording device using the integrated 3.5mm mini-plug cable.
- Plug the 3.5mm mini-plug from the microphone into the external microphone input jack on your camera or camcorder.
- Ensure the connection is firm to prevent audio dropouts.
Figure 3: Microphone with 3.5mm mini-plug cable.
3. 사용 설명서
3.1 전원 켜기/끄기
Locate the power switch on the microphone unit. Slide it to the 'ON' position to power on the microphone. Slide it to 'OFF' when not in use to conserve battery life.
3.2 감도 조정
The SGC-698 features a sensitivity switch with three settings: -10dB, 0dB, and +20dB. Adjust this setting based on your recording environment and desired audio level.
- 0dB: Standard setting for most recording situations. Provides good bass response for music recording.
- -10dB: Reduces the input gain, useful in loud environments or when recording close to the sound source to prevent distortion. Can also reduce floor noise.
- +20dB: Boosts the input gain, suitable for quiet environments or when recording distant sound sources. Use with caution as it can also amp배경 소음을 줄이세요.
3.3 로우컷 필터
The low-cut filter switch helps to reduce unwanted low-frequency noise, such as wind noise, air conditioner hum, or traffic rumble. Activate this filter when recording in environments prone to such disturbances.
3.4 앞유리 사용
For outdoor recording or in windy conditions, attach the included furry windscreen to minimize wind noise and plosives, ensuring clearer audio.
Figure 4: Microphone with furry windscreen.
3.5 배터리 표시등
When you turn the microphone on, the battery indicator will blink briefly. It will turn a steady red when the battery level is getting low, indicating approximately one hour of recording time remaining before replacement is needed.
4. 유지관리
적절한 유지 관리는 마이크의 수명과 최적의 성능을 보장합니다.
- 청소: 마이크 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제나 용제를 사용하지 마십시오.
- 배터리 교체: Replace the CR2032 battery promptly when the low battery indicator appears. Dispose of used batteries responsibly.
- 저장: Store the microphone in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the battery to prevent leakage.
- 손질: 마이크를 떨어뜨리거나 강한 충격을 주지 마십시오. 내부 구성 요소가 손상될 수 있습니다.
5. 문제 해결
If you encounter issues with your SGC-698 microphone, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No sound or very low sound output |
|
|
| Distorted or clipping audio |
|
|
| Excessive background noise (hum, rumble, wind) |
|
|
| Interference from mobile phones | Proximity to mobile devices. | Move mobile phones or other wireless devices away from the microphone and recording equipment. The microphone has anti-RFI technology, but strong signals can still cause issues. |
6. 사양
Detailed technical specifications for the TAKSTAR SGC-698 microphone:
| 마이크 유형 | Electrostatic Capacitance |
| 극성 패턴 | Unidirectional (Stereo XY) |
| 주파수 응답 | 30Hz - 16kHz |
| 감광도 | -44dB ± 3dB (0dB = 1 V/Pa at 1 kHz) |
| 최대 SPL | 130dB (THD ≤ 1.0% at 1 kHz) |
| 저주파 감쇠 | 80 Hz 10 dB/octave |
| 출력 임피던스 | 200Ω 이하 |
| 전원 공급 장치 | CR2032 3V Button Battery |
| 신호 대 잡음 비율 | 78데시벨 |
| 커넥터 유형 | 3.5mm 잭 |
| 재료 | 알류미늄 |
| 치수(길이 x 너비 x 높이) | 21.1 x 17.8 x 8.4cm (대략적인 포장 치수) |
| 품목 무게 | 1.15파운드 |
그림 5: 마이크 크기.
7. 보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or contact TAKSTAR customer service through their official web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.