Metra 99-6525HG Single/Double DIN Dash Kit for Chrysler 300 (2011-Up)

소개

This instruction manual provides detailed guidance for the installation and use of the Metra 99-6525HG Single/Double DIN Dash Kit. This kit is specifically designed for 2011 and newer Chrysler 300 vehicles, allowing for the installation of an aftermarket single or double DIN radio. It features high-grade ABS plastic construction with precision tolerances to ensure a factory-matched texture and style.

Image: Metra 99-6525HG Single/Double DIN Dash Kit. This image displays the high gloss black dash kit components, including the main bezel and mounting brackets, designed to integrate an aftermarket radio seamlessly into the Chrysler 300 dashboard.

안전 정보

Please read all instructions carefully before beginning installation. Improper installation may result in damage to the vehicle, the product, or personal injury. Always disconnect the vehicle's battery before performing any electrical work. Wear appropriate safety gear, including eye protection. If you are unsure about any part of the installation process, consult a qualified professional installer.

• 차량 시동이 꺼져 있고 주차 브레이크가 걸려 있는지 확인하십시오.
• Disconnect the negative terminal of the vehicle's battery before starting.
• Use only appropriate tools for the installation.
• Avoid placing tools or components on hot surfaces or near moving parts.
• Keep all wiring clear of sharp edges and moving components.

패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• Dash Kit (Main Bezel, Brackets)
• Axes Interface
• 배선 마구
• Storage Pocket (for single DIN mounting)
• 사용 설명서(본 문서)

설정 및 설치

This section outlines the general steps for installing the Metra 99-6525HG dash kit. Specific vehicle disassembly instructions may vary and should be referenced from a vehicle-specific service manual or online resources.

1. 차량 준비: Disconnect the negative battery terminal. Carefully remove the factory radio and associated trim panels from the dashboard. Refer to your vehicle's service manual for precise removal procedures.
2. 대시 키트를 조립하세요:
   • 에 대하여 단일 DIN radio installation: Secure the provided storage pocket below the radio opening in the dash kit. Attach the single DIN mounting brackets to the sides of your aftermarket radio, then secure the radio and pocket assembly into the dash kit bezel.
   • 에 대하여 이중 DIN radio installation: Attach the double DIN mounting brackets to the sides of your aftermarket radio, then secure the radio assembly into the dash kit bezel.
   Ensure a secure and gapless fit between the radio and the kit.
3. 배선 연결: Connect the included wiring harness to your aftermarket radio and the vehicle's factory wiring. Utilize the Axes interface as directed by its separate instructions to retain factory features such as steering wheel controls (if applicable). Ensure all connections are secure and properly insulated.
4. 테스트 기능: Before reassembling the dashboard, temporarily reconnect the vehicle's battery and test the aftermarket radio's functionality (power, audio, steering wheel controls, etc.).
5. 최종 조립: Once all functions are verified, disconnect the battery again. Carefully route all wiring to prevent pinching or interference. Install the assembled dash kit with the aftermarket radio into the vehicle's dashboard opening. Reinstall all removed trim panels and secure them properly.
6. 배터리를 다시 연결하십시오: 음극 배터리 단자를 다시 연결하십시오.

The kit is designed for an ISO Single/Double DIN mount, ensuring compatibility with a wide range of aftermarket head units.

작동 지침

This dash kit provides the structural and aesthetic framework for installing an aftermarket radio. Operating instructions for the radio itself will be found in the manual provided by the radio manufacturer. Once installed, the radio will function according to its own specifications and controls.

유지

The Metra 99-6525HG dash kit requires minimal maintenance. To keep the high gloss black finish clean, gently wipe it with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. Ensure no liquids enter the radio or vehicle's electrical components.

문제 해결

If you encounter issues after installing the dash kit and aftermarket radio, consider the following:

• 라디오 전원이 켜지지 않음:
  • Check all wiring connections, especially power and ground wires, for secure contact.
  • Verify the vehicle's fuse for the radio circuit is intact.
  • Ensure the vehicle's battery is properly reconnected and charged.
• 오디오 없음:
  • 스피커 와이어 연결이 올바르고 안전한지 확인하세요.
  • Check the radio's settings for mute or volume levels.
• 스티어링 휠 컨트롤이 작동하지 않음:
  • Refer to the specific instructions for the Axes interface to ensure it is correctly wired and programmed for your vehicle and radio.
  • Verify the interface is receiving power.
• Dash Kit Does Not Fit Flush:
  • Ensure all factory mounting points are clear of obstructions.
  • Double-check that the radio and brackets are correctly seated within the dash kit.
  • Verify that no wires are pinched or preventing the kit from seating properly.

For persistent issues, consult the aftermarket radio's manual or contact Metra technical support.

명세서

보증 정보

The Metra 99-6525HG Dash Kit comes with a 1년 제한 보증본 보증은 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 부적절한 설치, 사고, 오용, 남용, 부주의, 무단 개조 또는 정상적인 마모로 인한 손상은 보증 대상에서 제외됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.

지원하다

For technical assistance, installation questions, or warranty inquiries, please contact Metra Electronics Corp. customer support. You can typically find contact information on the official Metra web제품을 구매한 소매업체나 사이트를 통해서도 구매 가능합니다.

온라인 리소스: Visit the official Metra website for product updates, additional installation guides, and frequently asked questions.