AngelEye CO-AE-9B-FR Carbon Monoxide Detector User Manual

1. 서론

This manual provides essential information for the proper installation, operation, and maintenance of your AngelEye CO-AE-9B-FR Carbon Monoxide (CO) Detector. Please read these instructions carefully before use and retain them for future reference. This device is designed to detect carbon monoxide gas and alert occupants to its presence, helping to prevent CO poisoning.

중요한 안전 정보:

• This CO detector is not a substitute for a smoke detector.
• Regular testing of the device is crucial for ensuring its proper function.
• Never ignore a CO alarm. Follow the instructions in the 'Alarm Conditions and Response' section immediately.

2. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• AngelEye CO-AE-9B-FR Carbon Monoxide Detector
• 장착 나사 및 벽면 플러그
• 2 x 1.5V AA 알카라인 배터리
• 사용 설명서

3. 제품 오버view

The AngelEye CO-AE-9B-FR detector features a user-friendly design with clear indicators and a central test button.

이미지 1: 앞쪽 view of the AngelEye CO-AE-9B-FR Carbon Monoxide Detector. It is a white rectangular unit with rounded corners. On the left side, there is a large circular button labeled 'TEST/PAUSE'. To the right of this button, there are two smaller circular indicator lights. The top light is labeled 'Marche' (On/Power) and the bottom light is labeled 'Alarme' (Alarm). Further to the right, there are three horizontal ventilation slots.

주요 구성 요소:

• TEST/PAUSE Button: Used to test the detector's functionality and to silence a temporary alarm.
• Marche (On) Indicator: Illuminates to indicate the device is powered on and functioning correctly.
• Alarme (Alarm) Indicator: Illuminates and flashes during a CO alarm event.
• 환기 슬롯: Allow CO gas to enter the sensor chamber. Do not obstruct.

4. 설치

4.1 위치 선택

For optimal performance and safety, consider the following:

• 집의 각 층마다, 특히 침실 근처에 최소 한 개 이상의 일산화탄소 감지기를 설치하십시오.
• Place the detector in rooms with fuel-burning appliances (e.g., furnaces, water heaters, fireplaces).
• Mount on a wall or ceiling. If wall-mounted, place it at eye level or higher, but at least 15 cm (6 inches) from the ceiling.
• Avoid placing the detector in direct sunlight, near vents, fans, or in areas with high humidity (e.g., bathrooms).
• Keep at least 1 meter (3 feet) away from fuel-burning appliances to prevent nuisance alarms from initial startup fumes.

4.2 배터리 설치

1. 탐지기 뒷면의 배터리함 덮개를 여세요.
2. Insert the two 1.5V AA alkaline batteries, ensuring correct polarity (+ and -).
3. Close the battery compartment cover securely. The detector will emit a short beep and the 'Marche' indicator will flash, indicating it is powered on.

4.3 검출기 장착

1. Once the location is chosen, mark the positions for the mounting screws on the wall or ceiling.
2. Drill holes and insert the wall plugs (if necessary).
3. Secure the mounting bracket (if separate) or the detector directly using the provided screws.
4. Ensure the detector is firmly attached and stable.

5. 사용 설명서

5.1 초기 전원 켜기

After battery installation, the detector will perform a self-test. The 'Marche' indicator will flash, and a short beep may sound. The device is then operational.

5.2 정상 작동

During normal operation, the 'Marche' (On) indicator light will flash approximately once every 30-60 seconds, indicating that the detector is actively monitoring for carbon monoxide.

5.3 테스트 기능

It is recommended to test your CO detector weekly to ensure it is functioning correctly.

1. Press and hold the large 'TEST/PAUSE' button for a few seconds.
2. The detector will emit a loud alarm sound, and the 'Alarme' indicator will flash.
3. Release the button. The alarm will stop, and the detector will return to normal monitoring mode.

If the alarm does not sound during the test, refer to the 'Troubleshooting' section.

5.4 Alarm Conditions and Response

If the detector senses a dangerous level of carbon monoxide, it will activate a loud intermittent alarm sound, and the 'Alarme' indicator will flash rapidly.

알람이 울리면:

1. 즉시 신선한 공기를 마실 수 있는 야외로 이동하거나 모든 문과 창문을 열어 해당 구역을 환기시키세요.
2. 모든 사람이 확인되었는지 확인하기 위해 인원을 세어보세요.
3. 경보가 꺼지고 해당 구역이 완전히 환기될 때까지 건물에 다시 들어가지 마십시오.
4. 응급 서비스나 자격을 갖춘 기술자에게 연락하여 일산화탄소 발생 원인을 조사하도록 하십시오.
5. 전문가의 점검을 받기 전까지는 연료 연소 기기를 사용하지 마십시오.

5.5 Pause Function (Hush Mode)

In some cases, a temporary, non-threatening source of CO (e.g., fumes from a cleaning product) might trigger a nuisance alarm. The detector may feature a 'Pause' or 'Hush' function.

• Press the 'TEST/PAUSE' button briefly during an alarm.
• This will temporarily silence the alarm for a few minutes (e.g., 5-10 minutes).
• If the CO level remains high, the alarm will reactivate after the pause period.
• Do not use the pause function if you suspect a genuine CO leak.

6. 유지관리

6.1 정기 테스트

Test your CO detector weekly by pressing the 'TEST/PAUSE' button as described in section 5.3.

6.2 청소

Clean the exterior of the detector regularly (at least once a month) with a soft, damp cloth. Do not use cleaning agents or solvents. Do not paint the detector, as this can block the ventilation slots and interfere with sensor operation.

6.3 배터리 교체

The detector has a battery life of approximately 1 year. When the batteries are low, the detector will emit a regular chirp (e.g., every 30-60 seconds) and the 'Marche' indicator may flash differently or not at all. Replace the batteries immediately with two new 1.5V AA alkaline batteries. Refer to section 4.2 for battery installation instructions.

7. 문제 해결

8. 사양

• 모델: CO-AE-9B-FR (Reference: CO-AE9B-FRR)
• 상표: 엔젤아이
• 전원: 배터리 구동
• 배터리: 2 x 1.5V AA alkaline batteries (included)
• 배터리 수명: 약 1년
• 치수(길이 x 너비 x 높이): 13.3 x 13.3 x 4cm(5.2 x 5.2 x 1.6인치)
• 무게: 100그램(3.5온스)
• 인증: CE 인증
• 한국어: 816317001834

9. 보증 및 지원

The AngelEye CO-AE-9B-FR Carbon Monoxide Detector comes with a 7년 보증 구매일로부터 정상적인 사용 중에 발생한 재료 및 제조상의 결함을 보장합니다.

For warranty claims, technical support, or further assistance, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase for warranty validation.