PDP Afterglow Wireless Controller for PS3

소개

Thank you for choosing the PDP Afterglow Wireless Controller. This controller is designed to enhance your gaming experience on the PlayStation 3 and is also compatible with Windows 7 and up on PC. It features a distinctive clear polycarbonate housing with signature Afterglow blue lighting, custom-engineered SmartTrack technology for precise analog stick control, and upgraded L1/R1 and L2/R2 buttons with swappable functions. This manual provides essential information for setting up, operating, and maintaining your controller.

이미지: 앞면 view of the PDP Afterglow Wireless Controller, showcasing its clear blue illuminated design.

패키지 내용

모든 품목이 들어 있는지 확인하려면 패키지 내용물을 확인하세요.

• 1 x PDP Afterglow Wireless Controller
• 1 x USB Wireless Receiver Dongle
• 1 x 사용 설명서(이 문서)

메모: 본 제품 작동에는 AA 배터리 2개가 필요하며, 제품 구성품에는 포함되어 있지 않습니다.

설정

1. 배터리 설치: Open the battery compartment on the back of the controller. Insert two (2) AA batteries, ensuring correct polarity (+/-). Close the battery compartment securely.
2. USB 무선 수신기 연결:
   • 플레이스테이션 3용: Plug the USB wireless receiver dongle into an available USB port on your PlayStation 3 console.
   • PC의 경우: Plug the USB wireless receiver dongle into an available USB port on your PC. Ensure your PC is running Windows 7 or a newer version.
3. 컨트롤러 페어링:

   Once the USB receiver is connected, turn on your controller. The controller should automatically pair with the receiver. The blue LED lights on the controller will indicate a successful connection. If the controller does not connect automatically, ensure the receiver is properly inserted and the controller has fresh batteries. You may need to briefly remove and re-insert the USB receiver.

Image: Illustration demonstrating how to connect the USB wireless receiver to a PlayStation 3 console or PC.

작동 지침

컨트롤러 레이아웃

Image: Detailed diagram illustrating the button layout and labels of the PDP Afterglow Wireless Controller.

• 왼쪽 스틱 / 오른쪽 스틱: 움직임과 카메라 제어를 위해.
• 방향 패드: 정확한 방향 입력을 위해.
• Face Buttons (Triangle, Circle, Cross, Square): 표준 작업 버튼.
• Left Bumper (L1) / Right Bumper (R1): 어깨 단추.
• Left Trigger (L2) / Right Trigger (R2): 가변 입력을 위한 아날로그 트리거.
• 선택/시작 버튼: 게임별 기능.
• 홈 버튼: Access the PlayStation 3 XMB menu or PC game menu.

Afterglow Button Functionality

The Afterglow button, located on the back of the controller, allows you to swap the functions of the L1/R1 and L2/R2 buttons. To activate this feature, press and hold the Afterglow button. This can be useful for customizing your control scheme based on game preferences.

LED 조명 제어

The signature blue LED lighting can be toggled on or off. To control the lighting, locate the dedicated button on the back of the controller. Pressing this button will cycle the LED lights between on and off states.

전원 관리

To conserve battery life, the controller is designed to automatically shut down after approximately 2 minutes of inactivity. To reactivate the controller, press any button. The controller cannot be used to power on the PlayStation 3 console; the console must be turned on manually.

호환성 정보

This controller is specifically designed for PlayStation 3 games and PC games (Windows 7 and up). It is not compatible with PlayStation 2 games, even if played on a backwards-compatible PlayStation 3 console.

유지

• 배터리 교체: Replace AA batteries when the controller's performance diminishes or the LED lights dim. Always use fresh batteries and dispose of old batteries responsibly.
• 청소: 컨트롤러를 청소하려면 부드럽고 마른 천을 사용하세요. 찌든 때는 가볍게 두드려 닦아주세요.amp cloth can be used, but ensure no moisture enters the controller's internal components. Avoid using harsh chemicals or abrasive cleaners.
• 저장: 장기간 사용하지 않을 때는 컨트롤러를 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.

문제 해결

컨트롤러 전원이 켜지지 않습니다.

Ensure fresh AA batteries are correctly installed with proper polarity. Check the battery compartment for any obstructions.

Controller does not connect or pair:

• Verify the USB wireless receiver dongle is securely plugged into an active USB port on your console or PC.
• Try unplugging and re-plugging the USB receiver.
• Ensure the controller has fresh batteries.
• Move the controller closer to the USB receiver to rule out range issues.

Buttons or analog sticks are unresponsive or sticking:

Ensure the controller is clean and free from debris around the buttons and sticks. Avoid excessive force during use. If the issue persists, contact customer support.

LED lights are not illuminating:

Check if the LED lighting feature has been toggled off using the dedicated button on the back of the controller. Ensure batteries are not depleted.

Controller does not turn on the PlayStation 3 console:

This is expected behavior. The PlayStation 3 console must be powered on manually.

Controller does not work with PlayStation 2 games:

This controller is not designed for PlayStation 2 games. It is compatible with PlayStation 3 and PC (Windows 7 and up) titles only.

명세서

Image: The PDP Afterglow Wireless Controller with its key dimensions (length, width, height) indicated.

보증 및 지원

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official PDP web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

온라인 지원: 아마존에서 PDP 스토어를 방문하세요.