1. 서론
This manual provides essential information for the safe and efficient use of your LUXRITE F32T8/841 32W 48 Inch T8 Fluorescent Tube Light Bulb. Please read these instructions carefully before installation and retain them for future reference. This fluorescent tube is designed to provide 4100K Cool White light with 2800 lumens, consuming 32W of power, and features a G13 medium bi-pin base.
Image: Luxrite T8 Fluorescent Tube Light Bulb highlighting key specifications.
2. 안전 정보
- 전기 안전: Always turn off power at the circuit breaker before installing or replacing light bulbs to prevent electric shock.
- 고정물 호환성: This bulb is designed for T8 (1" diameter) compatible holders and requires a T8 fluorescent ballast. It is not compatible with T12 fixtures and is not an LED retrofit.
- 손질: Fluorescent tubes are made of glass and can break if dropped or mishandled. Handle with care.
- 처분: 형광등에는 소량의 수은이 포함되어 있습니다. 해당 지역의 규정에 따라 폐기하십시오. 일반 가정용 쓰레기에 버리지 마십시오.
- 비조광: This bulb is non-dimmable. Do not use with dimmer switches.
3. 패키지 내용
패키지에는 다음 항목이 포함되어 있어야 합니다.
- LUXRITE F32T8/841 32W 48 Inch T8 Fluorescent Tube Light Bulbs (6 count)
Inspect all components for any damage upon receipt. If any items are missing or damaged, please contact customer support.
4. 설정 및 설치
Follow these steps to safely install your new fluorescent tube light bulb:
- 전원 끄기: Locate the circuit breaker controlling the light fixture and turn off the power. Verify the power is off by attempting to turn on the light switch.
- Remove Fixture Cover (if applicable): If your fixture has a cover, gently push it upwards and slide it to one side to release it. Carefully lower and remove the cover.
- 오래된 전구 제거: Grasp the old fluorescent tube firmly. Rotate the tube approximately 90 degrees until the pins align with the slots in the lampholder. Gently pull the tube downwards and away from the fixture.
- 새 전구 설치: Align the bi-pin base of the new LUXRITE fluorescent tube with the slots in the lampholder. Push the pins into the slots and rotate the tube 90 degrees until it locks securely into place. Ensure both ends are properly seated.
- Replace Fixture Cover (if applicable): Reattach the fixture cover by reversing the removal process.
- 복원력 : 회로 차단기를 다시 켜세요.
- 테스트 라이트: Turn on the light switch to ensure the new bulb is functioning correctly.
For a visual guide on changing a fluorescent tube light, please refer to the video below:
Video: Instructions on how to change out a fluorescent tube light, demonstrating cover removal and bulb replacement.
Image: Detail of the G13 medium bi-pin base and the 48-inch length of the T8 fluorescent tube.
5. 사용 설명서
Once installed, the LUXRITE F32T8/841 fluorescent tube operates like any standard fluorescent light. Simply use the wall switch connected to your fixture to turn the light on or off. Allow a few moments for the bulb to reach full brightness upon activation.
6. 유지관리
- 청소: To maintain optimal light output, periodically clean the bulb and fixture cover with a soft, dry, lint-free cloth. Ensure power is off before cleaning.
- 대사: The bulb has an average lifespan of 13,000 hours. Replace the bulb when it begins to flicker, dim significantly, or fails to illuminate. Follow the installation steps in Section 4 for replacement.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전구가 켜지지 않습니다 | 고정할 전원이 없음 | 회로 차단기와 벽 스위치를 확인하세요. |
| 부적절한 설치 | Ensure bulb pins are fully inserted and rotated 90 degrees in the lamp홀더. | |
| 밸러스트에 결함이 있음 | Consult a qualified electrician to inspect or replace the ballast. | |
| Expired bulb life | 전구를 교체하십시오. | |
| 전구가 깜빡이거나 어두워짐 | 노화 전구 | 전구를 교체하십시오. |
| 연결이 느슨함 | Ensure bulb is securely seated in the lamp홀더. | |
| Incompatible ballast | Ensure the fixture has a compatible T8 fluorescent ballast. |
8. 사양
- 상표: 럭스라이트
- 모델 이름: LR20732
- 조명 유형: 형광등
- 왓tage: 32 와트
- 전구 모양 크기: T8 (1" Diameter)
- 전구베이스: G13 Medium Bi-Pin
- 밝은 색상: 쿨화이트
- 색온도: 4100 켈빈
- 광속: 2800루멘
- 권tage: 120 볼트
- 기대수명: 13,000시간
- 실내/실외 사용: 실내
- 밝기 조절 가능: 아니요
- 재료: 유리
- 길이: 48 인치
Image: Illustration of 4000K Cool White light provided by the Luxrite T8 bulb.
9. 보증 및 지원
For warranty information or technical support, please refer to the product packaging or contact LUXRITE customer service directly. Keep your purchase receipt for warranty claims.