소개
Welcome to the Alla Lighting T10 Wedge 168 194 LED Bulbs instruction manual. These high-performance LED bulbs are designed to replace various incandescent lamps in your vehicle, offering superior brightness, energy efficiency, and a longer lifespan. This manual will guide you through the product features, installation process, and general care to ensure optimal performance and satisfaction.
제품 특징
- 높은 조도: Each bulb provides 250 lumens, totaling 500 lumens for a pair, significantly brighter than standard incandescent lamps.
- 첨단 LED 기술: Equipped with 18 pieces of high-power and high-quality 3014 SMD LED chips.
- 색상: Amber Yellow, providing a distinct and bright signal.
- 권tage: Operates within 12V - 18V DC, featuring built-in current resistance for stable performance.
- 넓은 빔 각도: Offers a full 360° view angle for comprehensive light distribution.
- 안전한 작동 : Produces no UV or IR radiation.
- 간편한 설치: Designed for plug-and-play installation with non-polarity, simplifying the replacement process.
- 에너지 효율성: Low power consumption and low operating temperature contribute to energy savings.
- 긴 수명: Engineered for a lifespan of up to 30,000 hours, reducing the need for frequent replacements.
호환성 및 적용 분야
These T10 Wedge LED bulbs are direct replacements for a wide range of incandescent bulb types and can be used in various vehicle lighting applications, depending on your vehicle's trim and specific requirements.
호환 가능한 전구 유형:
- 158, 161, 168, 168A, 168NA, 175, 194, 194NA, 2821, 2825, 2827
- 147, 152, 159, 555, 558, 585, 906, 912, 921, 1250, 1251, 2886X, 3652, 658
- PC168, PC175, PC194, PC195, W5W, W5WLL, 2825L, W10W
일반적인 응용 프로그램:
- Exterior Turn Signal Lights
- 번호판 조명
- Side Marker Lights
- Side Door Courtesy Lights
- Interior Map Lights
- 돔 조명
- Parking City Lights
- Glove Box Lights
- Trunk Cargo/Room Lights
- Stepwell Lights
- Luggage Compartment Lights
- Inner Tail Light Bulbs
설치 지침
Installation of Alla Lighting T10 Wedge LED bulbs is a straightforward plug-and-play process. Always ensure the vehicle's power is off before beginning installation to prevent electrical issues.
일반 단계:
- 전구를 찾으세요: Identify the incandescent bulb you wish to replace. Refer to your vehicle's owner's manual for specific bulb locations.
- 덮개를 제거하십시오: Carefully remove any protective covers, lens, or housing around the bulb. This may require a trim removal tool or a small screwdriver.
- 오래된 전구 제거: Gently pull the old halogen bulb straight out from its socket. Be cautious as it may be hot if recently used.
- LED 전구 삽입: Insert the new Alla Lighting LED bulb into the socket. These bulbs are non-polarity, meaning they will work regardless of orientation. Push straight in until it is seated firmly.
- 테스트 기능: Turn on the vehicle's power and test the new LED bulb to ensure it illuminates correctly.
- 커버 교체: Once confirmed working, replace any covers or housing removed in step 2.
시각적 설치 가이드:
Video demonstrating the installation process of Alla Lighting T10 LED bulbs for interior dome lights, showing removal of cover, old bulb, and insertion of new LED bulb.
비디오 쇼asing the installation of Alla Lighting T10 LED bulbs as exterior marker or signal lights, highlighting the brightness comparison with standard bulbs.
작업
Alla Lighting T10 Wedge LED bulbs provide instant-on, 360-degree amber yellow light output. They are designed for consistent performance within the specified voltage range of 12V-18V DC. Once installed, the bulbs will operate in conjunction with your vehicle's existing lighting system, providing enhanced visibility and a modern aesthetic.
유지
These LED bulbs are designed for a long lifespan of up to 30,000 hours and require minimal maintenance. Unlike traditional halogen bulbs, they do not have filaments that can burn out, significantly reducing the need for frequent replacements. To ensure optimal light output, periodically clean the bulb and surrounding lens from any accumulated dirt or debris using a soft, dry cloth.
문제 해결
전구가 켜지지 않습니다:
- Ensure the vehicle's power is on and the light switch is in the correct position.
- Check the connection: Ensure the LED bulb is fully and securely inserted into the socket. A loose connection can prevent illumination.
- Verify correct bulb type: Confirm that the T10 Wedge bulb is the correct type for your vehicle's specific application.
- Check vehicle fuse: Inspect the relevant fuse in your vehicle's fuse box. A blown fuse can prevent power from reaching the bulb.
Hyper Flashing (for turn signals):
- If these bulbs are used as turn signals, some vehicles may experience hyper flashing (rapid blinking) due to the lower power consumption of LED bulbs compared to incandescent ones. This can typically be resolved by installing load resistors (sold separately) or an LED-compatible flasher relay.
기술 사양
| 사양 | 세부 사항 |
|---|---|
| 상표 | 알라 라이팅 |
| 광원 유형 | 주도의 |
| 색상 | 앰버 옐로우 |
| 색온도 | 2000 켈빈 |
| 명도 | 전구당 250루멘 |
| 왓tage | 1.5 와트 |
| 권tage | 12V - 18V 직류 |
| 기본 유형 | T10 Wedge |
| LED 유형 | 3014 SMD (18 chips) |
| 수명 | 최대 30,000시간 |
| 제조업체 부품 번호 | ALL-T10-3014-18Y |
| 패키지 수량 | 2 카운트 |
보증 및 지원
Alla Lighting provides a 1년 warranty for manufacturer quality on these T10 Wedge LED bulbs. This warranty covers defects in materials and workmanship under normal use. For any warranty claims, technical assistance, or product support, please contact Alla Lighting directly through their official channels or the retailer where the product was purchased. Please retain your proof of purchase for warranty validation.