Cree Lighting Connected LED Smart Bulb User Manual

소개

The Cree Connected LED bulb is designed to provide an easy-to-use and cost-effective solution for customizing lighting in your home. This smart bulb can be controlled from anywhere, offering convenience and flexibility. It integrates with compatible home automation systems, allowing you to manage your lighting settings via an app on your iOS or Android device.

The Cree Connected LED bulb offers convenient control from anywhere, enhancing your home lighting experience.

안전 정보

본 제품을 설치하거나 사용하기 전에 모든 안전 지침을 읽고 숙지하십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 기타 위험이 발생할 수 있습니다.

• 실내에서만 사용 가능: This bulb is designed for indoor use in dry locations. Do not use in wet or damp 환경.
• 밀폐형 조명기구에는 사용할 수 없습니다. Do not use this bulb in fully enclosed luminaires or fixtures, as this can trap heat and shorten the bulb's lifespan.
• 밝기 조절이 가능한 LED: This bulb is dimmable, but it is not recommended for use with traditional wall dimmers. Control dimming via a compatible smart hub and app.
• 설치 전 전원 끄기: Always turn off the power to the fixture at the circuit breaker before installing or removing the bulb.
• 권tage 호환성: 조명기구의 볼륨을 확인하세요tage (120 Volts) matches the bulb's requirements.
• 조심스럽게 다루십시오: Avoid dropping the bulb or subjecting it to excessive force.

패키지 내용

The package for your Cree Connected LED Smart Bulb typically includes:

• 1 x Cree Connected LED Smart Bulb

The product packaging for the Cree Connected LED Smart Bulb.

설정

To set up your Cree Connected LED Smart Bulb, you will need a compatible ZigBee certified hub (e.g., Wink, SmartThings, WeMo, or Alexa devices with built-in ZigBee hub like Echo Plus, Echo Studio, Echo Show 2nd Gen).

1. 전구를 설치하십시오: Screw the Cree Connected LED bulb into a standard E26 light socket. Ensure the power to the fixture is off before installation.
2. Prepare Your Hub: Place your compatible ZigBee hub into device discovery mode. Refer to your hub's specific instructions for this step. It is often recommended to initiate discovery mode on the hub ~ 전에 turning on the bulb.
3. Power On the Bulb: Turn on the power to the light fixture. The bulb should light up. Your hub should detect and pair with the bulb automatically. A successful pairing is often indicated by the bulb blinking twice.
4. Download and Launch App: Download the applicable app for your chosen hub (e.g., Wink app, SmartThings app, Alexa app) on your iOS or Android device. Launch the app and follow the on-screen instructions to add and configure your new bulb.
5. 전구 이름을 지어주세요: Once paired, you can name your bulb within the app for easy identification and control (e.g., "Living Room Lamp," "Kitchen Light").

Resetting the Bulb to Factory Defaults

If you experience difficulty pairing the bulb or need to reset it, follow this sequence:

• 1. Turn the bulb 끄다 2초 동안.
• 2. Turn the bulb ON 1초 동안.
• 3. Turn the bulb 끄다 2초 동안.
• 4. Turn the bulb ON 1초 동안.
• 5. Turn the bulb 끄다 2초 동안.
• 6. Turn the bulb ON 1초 동안.
• 7. Turn the bulb 끄다 2초 동안.
• 8. Turn the bulb ON.

After the fourth ON cycle, the light will blink twice, indicating a successful reset. You can then attempt to pair the bulb again.

Cree Lighting offers a variety of smart lighting solutions.

작동 지침

Once your Cree Connected LED Smart Bulb is successfully paired with your hub, you can control it using the associated mobile application or voice commands through compatible smart assistants.

• 온/오프 제어: Use the app to turn the bulb on or off instantly.
• 디밍 : Adjust the brightness of the bulb to your desired level using the dimming controls within the app. The bulb offers a full range of dimming.
• 일정: Set schedules for your lights to turn on or off automatically at specific times, or to simulate occupancy when you are away from home.
• 그룹화: Group multiple Cree Connected bulbs together to control them simultaneously as a single unit.
• 음성 제어: If connected to a voice assistant (e.g., Alexa), use voice commands to control your lights (e.g., "Alexa, turn on Living Room Light," "Alexa, dim Kitchen to 50%").

Control your smart bulbs easily through the mobile application.

Control your lights remotely for convenience and security.

유지

The Cree Connected LED Smart Bulb requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• 청소: 청소하기 전에 전구가 식었는지, 전원이 꺼져 있는지 확인하십시오. 부드럽고 마른 천으로 전구를 닦으십시오. 액체 세제나 연마성 세제는 사용하지 마십시오.
• 저장: 전구를 장기간 보관할 경우, 원래 포장재 또는 보호 용기에 넣어 서늘하고 건조한 곳에 보관하십시오.
• 과열을 피하세요: Do not install the bulb in enclosed fixtures or areas with poor ventilation, as this can lead to overheating and reduce its lifespan.

문제 해결

If you encounter issues with your Cree Connected LED Smart Bulb, refer to the following common problems and solutions:

명세서

Dimensions of the Cree Connected LED Smart Bulb.

보증 및 지원

보증: The Cree Connected LED Smart Bulb comes with a 3-year limited warranty. Please refer to the product packaging for complete details regarding warranty coverage and terms.

지원하다: For additional support, frequently asked questions, or to access the latest user guides and installation manuals, please visit the official Cree Lighting website. You may also find helpful resources in the PDF documents provided by the manufacturer:

• 설치 설명서(PDF)
• 사용 설명서 (PDF)
• 사용 설명서 (PDF)