1. 서론
구매해주셔서 감사합니다asing the ROLAND D-110 Digital Sound Module. The D-110 is a versatile rack-mount digital sound module featuring ROLAND's acclaimed LA (Linear Arithmetic) synthesis technology. It offers 32 voices of polyphony and 8-part multi-timbral capabilities, making it an ideal addition to any MIDI-based music production setup. This unit is designed for direct power connection.
This manual provides essential information for the proper setup, operation, and maintenance of your D-110. Please read it thoroughly before using the unit to ensure optimal performance and longevity.
그림 1: 전면 view of the ROLAND D-110 Digital Sound Module, showing controls and display.
2. 안전 정보
안전한 작동을 보장하고 손상을 방지하려면 다음 예방 조치를 준수하세요.
- 전원 공급 장치: 지정된 전원 공급 장치만 사용하십시오.tage. Ensure the power cable is securely connected and not damaged.
- 위치: Place the unit on a stable, level surface. Avoid locations exposed to direct sunlight, extreme temperatures, high humidity, or excessive dust.
- 통풍: 환기구를 막지 마십시오. 과열을 방지하기 위해 장치 주변에 충분한 공기 흐름을 확보하십시오.
- 이물질: Do not allow liquids or foreign objects to enter the unit. If this occurs, disconnect the power immediately and contact qualified service personnel.
- 서비스: Do not attempt to service the unit yourself. Refer all servicing to qualified ROLAND service personnel.
3. 패키지 내용
다음 품목이 모두 패키지에 포함되어 있는지 확인하세요.
- ROLAND D-110 Digital Sound Module Unit
- AC 전원 케이블
- 사용 설명서(이 문서)
누락되거나 손상된 품목이 있는 경우 즉시 대리점에 문의하십시오.
4. 설정
4.1 전원 연결
- Ensure the D-110's power switch is in the OFF position.
- Connect the supplied AC power cable to the AC IN jack on the rear panel of the D-110.
- Plug the other end of the power cable into a standard AC outlet.
4.2 오디오 연결
Connect the D-110's audio outputs to your mixer, amplifier, or audio interface using appropriate audio cables (not included).
- 주요 출력 (좌/우): For stereo output.
- Individual Outputs: The D-110 may feature individual outputs for routing specific parts to separate mixer channels. Refer to the rear panel for available jacks.
4.3 MIDI 연결
To control the D-110 from a MIDI keyboard, sequencer, or computer, connect MIDI cables (not included) as follows:
- Connect the MIDI OUT of your controller/sequencer to the MIDI IN of the D-110.
- If you wish to send MIDI data from the D-110 (e.g., system exclusive data), connect the MIDI OUT of the D-110 to the MIDI IN of your receiving device.
5. 사용 설명서
5.1 전원 켜기/끄기
- 전원을 켜려면: Ensure all connections are made, then press the POWER switch on the front panel. The display will illuminate.
- 전원을 끄려면: POWER 스위치를 다시 누르세요.
5.2 기본 사운드 선택
The D-110 contains a variety of preset sounds (Tones). Use the front panel buttons and data entry controls to browse and select sounds.
- 사용하세요 은행 buttons to select a sound bank (e.g., A, B, C, D).
- 사용하세요 숫자 버튼 또는 값 dial to select a specific Tone within the bank.
- The display will show the name of the selected Tone.
5.3 Multi-Timbral Mode (Performance Mode)
The D-110 can play up to 8 different sounds simultaneously, each assigned to a separate MIDI channel. This is known as Performance Mode.
- 를 누르세요 성능 button to enter Performance Mode.
- 사용하세요 부분 buttons to select the MIDI part you wish to edit.
- Assign a Tone to each part and set its MIDI channel, volume, pan, and other parameters using the display and controls.
- Save your custom performance settings to a user memory location.
5.4 Editing Tones and Performances
The D-110 offers extensive editing capabilities for Tones and Performances. Refer to the detailed sections in the full owner's manual for in-depth instructions on parameter editing, effects, and saving your custom sounds.
6. 유지관리
6.1 청소
- 부드럽고 마른 천으로 장치 외부를 닦으세요.
- 잘 지워지지 않는 먼지에는 약간의 d를 사용하세요.amp 천으로 닦은 후 물기를 닦아내세요.
- 연마성 세척제, 왁스 또는 용제를 사용하지 마십시오. 이러한 제품은 마감재를 손상시킬 수 있습니다.
6.2 보관
When storing the D-110 for extended periods, ensure it is powered off and disconnected from the AC outlet. Store it in a cool, dry place away from direct sunlight and extreme temperatures.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원이 없습니다 | 전원 케이블이 연결되지 않았습니다. 전원 콘센트가 고장났습니다. 제품 퓨즈가 끊어졌습니다. | 전원 케이블 연결 상태를 확인하십시오. 다른 콘센트에 연결해 보십시오. 퓨즈 교체를 위해 서비스 센터에 문의하십시오. |
| 사운드 출력이 없습니다 | Audio cables not connected; Volume too low; MIDI input not received; Incorrect MIDI channel. | Check audio cable connections; Increase D-110 and mixer/amp volume; Verify MIDI connections and channel settings. |
| MIDI가 응답하지 않음 | MIDI cables incorrect; MIDI channel mismatch; MIDI settings on D-110 or controller incorrect. | Ensure MIDI OUT to MIDI IN connection; Check MIDI channels on both devices; Review MIDI settings in the D-110 manual. |
If the problem persists after trying these solutions, please contact ROLAND customer support or a qualified service center.
8. 사양
- 모델: ROLAND D-110
- 소리 생성: LA (Linear Arithmetic) Synthesis
- 다음: 32개의 목소리
- Multi-timbral Parts: 8
- 메모리: Internal Tones, Performances, and User Memory (expandable with memory card, e.g., KV-211 if included)
- 커넥터: MIDI IN/OUT/THRU, Audio Outputs (L/R, possibly individual), AC IN
- 전원 공급 장치: Direct AC connection
- 치수: Standard 1U rack-mount size (specific dimensions may vary slightly)
- 무게: (Information not provided, refer to product packaging)
사양은 예고 없이 변경될 수 있습니다.
9. 보증 및 지원
ROLAND products are covered by a limited warranty. Please refer to the warranty card included with your product or visit the official ROLAND web해당 지역의 자세한 보증 약관 및 조건은 해당 사이트에서 확인하세요.
For technical support, service, or inquiries, please contact your local ROLAND distributor or authorized service center. Contact information can typically be found on the ROLAND official web대지: www.roland.com/global/support/
