EVGA GeForce GTX 980 Ti Graphics Card User Manual

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your EVGA GeForce GTX 980 Ti graphics card. The EVGA GeForce GTX 980 Ti is designed to deliver high-performance graphics, accelerated by the NVIDIA Maxwell architecture. It features 2816 NVIDIA CUDA Cores and 6GB of GDDR5 memory, optimized for 4K and virtual reality experiences.

Figure 1: EVGA GeForce GTX 980 Ti Graphics Card (Front View)

The EVGA GeForce GTX 980 Ti graphics card is engineered for demanding gaming and professional applications, offering advanced features such as Virtual Reality Ready, 4K support, DirectX12 compatibility, and Gamestream to NVIDIA SHIELD.

2. 패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

• EVGA GeForce GTX 980 Ti Graphics Card
• Driver CD (or link to latest drivers)
• 빠른 설치 가이드
• 전원 어댑터 케이블 (전원 공급에 필요한 경우)
• DVI to VGA Adapter (may be included)

Figure 2: Included Accessories (DVI adapter and power cables)

The accessories shown include a DVI to VGA adapter and power adapter cables, which may be necessary for connecting older monitors or for power supplies without native 6-pin or 8-pin PCIe power connectors.

3. 시스템 요구 사항

• 듀얼 너비 x16 그래픽 슬롯 XNUMX 개가있는 PCI Express 호환 마더 보드.
• Minimum 600W or greater power supply with two 8-pin or 6+2-pin PCI Express supplementary power connectors.
• 최소 시스템 메모리 4GB (8GB 권장).
• Microsoft Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista.
• 드라이버 설치 및 업데이트를 위해 인터넷 연결이 필요합니다.

4. 설치

4.1 하드웨어 설치

1. 전원 끄기 시스템: 컴퓨터를 끄고 벽면 콘센트에서 전원 케이블을 뽑으세요.
2. 컴퓨터 케이스 열기: 마더보드에 접근하려면 컴퓨터 케이스의 측면 패널을 제거하세요.
3. PCIe 슬롯 찾기: Find an available PCI Express x16 slot on your motherboard. If replacing an existing graphics card, carefully remove it.
4. 그래픽 카드를 장착하세요: Align the EVGA GeForce GTX 980 Ti with the PCIe x16 slot and press down firmly until it is securely seated. Ensure the retention clip locks into place.
5. 보안 카드: 나사를 사용하여 그래픽 카드를 컴퓨터 케이스의 확장 슬롯 브래킷에 고정하십시오.
6. 전원 케이블 연결: Connect the required 8-pin or 6+2-pin PCIe power connectors from your power supply to the corresponding ports on the graphics card. The card typically requires two such connectors.


Figure 3: Graphics Card Top View, showing power connector locations

This image illustrates the top view of the graphics card, highlighting the location where the PCIe power connectors from your power supply should be attached. Ensure both connectors are securely fastened.

7. 사건 종결: 컴퓨터 케이스 측면 패널을 교체하세요.
8. 디스플레이 연결: Connect your monitor(s) to the graphics card's display outputs (DisplayPort, HDMI, DVI).


Figure 4: Graphics Card Rear I/O Ports

The rear I/O panel features multiple display outputs, typically including DisplayPort, HDMI, and DVI. Connect your monitor cables to these ports.

9. 전원 켜기: 전원 케이블을 다시 연결하고 컴퓨터를 켜세요.

4.2 드라이버 설치

1. Boot to Operating System: Allow your computer to boot into your operating system.
2. 드라이버 설치:
   • Insert the included driver CD and follow the on-screen instructions.
   • Alternatively, for the latest drivers, visit the official NVIDIA web사이트 (www.nvidia.com/drivers) and download the appropriate drivers for your GeForce GTX 980 Ti and operating system.
3. 컴퓨터를 다시 시작합니다. 드라이버 설치가 완료되면 변경 사항을 적용하기 위해 컴퓨터를 다시 시작하십시오.

5. 그래픽 카드 작동 방법

5.1 디스플레이 구성

Once drivers are installed, you can configure your display settings through the NVIDIA Control Panel. This allows you to adjust resolution, refresh rate, and set up multiple monitors. The EVGA GeForce GTX 980 Ti supports high resolutions up to 4096x2160.

5.2 게임 및 애플리케이션

Your graphics card is designed for optimal performance in demanding games and applications. It is Virtual Reality Ready and supports DirectX12, providing an enhanced visual experience. Ensure your games and applications are updated to leverage the full capabilities of the card.

6. 유지관리

To ensure the longevity and optimal performance of your EVGA GeForce GTX 980 Ti, consider the following maintenance tips:

• 깨끗하게 유지하십시오: 압축 공기를 사용하여 그래픽 카드 방열판과 팬의 먼지를 주기적으로 청소하십시오. 청소하기 전에 컴퓨터 전원을 끄고 전원 케이블을 뽑으십시오.
• 공기 흐름 확보: Maintain good airflow within your computer case. Ensure case fans are functioning correctly and cables are managed to prevent obstruction.
• 드라이버 업데이트 : Regularly check for and install the latest graphics drivers from NVIDIA to benefit from performance improvements and bug fixes.

7. 문제 해결

• 디스플레이 출력 없음:
  • 모니터 케이블이 그래픽 카드와 모니터에 제대로 연결되어 있는지 확인하십시오.
  • Verify that the graphics card is fully seated in the PCIe slot and secured.
  • Check that all required PCIe power cables are connected to the graphics card.
  • 가능하다면 다른 모니터나 케이블로 테스트해보세요.
• 드라이버 설치 문제:
  • Ensure you have downloaded the correct drivers for your operating system and graphics card model from the NVIDIA web대지.
  • Uninstall any previous graphics drivers before attempting a new installation.
• 과열:
  • 컴퓨터 케이스 내부에 적절한 공기 흐름이 유지되도록 하십시오.
  • 그래픽 카드 팬과 방열판의 먼지를 청소하세요.
  • Monitor temperatures using third-party software. If temperatures consistently exceed safe operating limits (e.g., above 85°C under load), consider improving case ventilation.
• HDMI Port Issues with VR Headsets:
  • Some users have reported issues with the HDMI port not functioning correctly with certain VR headsets (e.g., Oculus Rift, HTC Vive), resulting in a blank display.
  • If experiencing this, try connecting the VR headset to one of the DisplayPort outputs using an appropriate adapter if necessary.
  • 그래픽 카드 드라이버가 최신인지 확인하세요.

8. 사양

9. 보증 및 지원

EVGA provides technical support for its products. For assistance, please contact EVGA's 24/7 Technical Support. Refer to the official EVGA web자세한 보증 정보와 지원 리소스는 사이트에서 확인하세요.

EVGA 지원 Web대지