NVX VUBT2 Universal Waterproof Bluetooth Audio Receiver Instruction Manual

1. 제품 오버view

The NVX VUBT2 is a universal waterproof Bluetooth 4.0 audio receiver designed to add wireless audio streaming capabilities to various vehicles and vessels, including marine, boats, cars, and ATVs. It features a robust, water-resistant design and provides high-quality stereo audio output.

주요 특징:

• 블루투스 프로file: A2DP(고품질, 스테레오 오디오)
• Bluetooth Core Specification: Version 4.0 with aptX
• 출력: One Stereo Pair, Low-Level RCA Plugs
• 출력 볼륨tage: 2V 실효값
• 신호 대 잡음 비율: 93dB (20Hz - 20kHz)
• 방수 기능: IPX67 rated for protection against dust and water immersion.
• 연결성: 3.5mm 오디오 입력/출력.
• 원격 켜기: Amplifier remote turn-on feature.

2. 안전 정보

설치 및 사용 전에 모든 지침을 주의 깊게 읽어 주십시오. 이 지침을 따르지 않을 경우 제품 손상, 재산 피해 또는 인명 피해가 발생할 수 있습니다.

• Ensure the vehicle's power is disconnected before installation to prevent electrical shorts.
• Use appropriate wiring gauges and fuses as recommended.
• Mount the device securely to prevent movement during operation.
• 기기를 극한의 온도나 직사광선에 노출시키지 마십시오.
• While the device is waterproof (IPX67), ensure all connections are properly sealed and protected from direct water exposure to maintain integrity.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• NVX VUBT2 Bluetooth Audio Receiver
• Power/Ground/Remote Wiring Harness with In-line Fuse
• 3.5mm - RCA 오디오 케이블
• Mounting Hardware (screws or adhesive pads)

Image: The NVX VUBT2 Bluetooth Audio Receiver shown with its power/ground/remote wiring harness, in-line fuse, and 3.5mm to RCA audio cable.

4. 설정 및 설치

4.1 배선 연결

The VUBT2 requires power, ground, and a remote turn-on connection. It outputs audio via RCA connections.

1. 전원(빨간색 선): Connect the red wire to a switched 12V power source. This can be the accessory wire from your vehicle's ignition or a dedicated switch. The in-line fuse should be installed close to the power source.
2. 접지(검은색 전선): Connect the black wire to a solid chassis ground point. Ensure a clean, secure connection for optimal performance.
3. 원격 전원 켜기(파란색 선): 파란색 전선을 원격 켜기 입력에 연결하세요. amplifier or other audio components. This will power on the VUBT2 when your system is activated.
4. Audio Output (3.5mm to RCA): Connect the 3.5mm jack from the VUBT2 to the included 3.5mm to RCA cable. Then, connect the RCA plugs (red for right, white for left) to the audio input of your ampliifier 또는 헤드 유닛.

Image: The NVX VUBT2 Bluetooth receiver wired to an amplifier, demonstrating the remote turn-on and RCA audio connections.

Image: Close-up of the 3.5mm audio output connected to RCA cables, ready for connection to an audio system.

4.2 장착

The compact design of the VUBT2 allows for flexible mounting options. It can be mounted using screws through its integrated tabs or with adhesive pads (if included).

• Choose a location that is dry, secure, and allows for proper cable routing.
• Ensure the mounting surface is clean and flat if using adhesive.
• The device is IPX67 rated, making it suitable for exposed locations, but protecting connections is still recommended.

Image: The underside of the NVX VUBT2 unit, displaying the 3M adhesive backing for secure mounting in various applications.

5. 사용 설명서

5.1 블루투스 페어링

1. Ensure the VUBT2 is powered on (your audio system is active).
2. 모바일 기기(스마트폰, 태블릿 등)에서 Bluetooth 설정으로 이동합니다.
3. Scan for available Bluetooth devices. The VUBT2 will appear as "NVX VUBT2" or similar.
4. Select the VUBT2 to pair. A confirmation tone or LED indicator may signal a successful connection.
5. Once paired, your device will typically reconnect automatically when in range and the VUBT2 is powered on.

5.2 오디오 재생

After successful pairing, you can stream audio from your mobile device to your connected audio system. Control playback (play/pause, skip tracks, volume) directly from your paired device.

Image: A smartphone screen displaying music controls, illustrating how users can manage audio playback through the NVX VUBT2.

6. 유지관리

The NVX VUBT2 is designed for durability and minimal maintenance. Follow these guidelines to ensure longevity:

• 청소: 부드러운 d를 사용하세요amp cloth to wipe the exterior of the unit. Avoid harsh chemicals or abrasive cleaners.
• 방수 기능: While IPX67 rated, avoid prolonged submersion or high-pressure water jets directly on the unit or its connections. Regularly inspect wiring and connections for any signs of wear or damage that could compromise water resistance.
• 사이: 모든 배선 연결부를 주기적으로 점검하여 안전하고 부식되지 않았는지 확인하세요.

Image: The NVX VUBT2 unit covered in water droplets, illustrating its IPX67 water-resistance rating for use in challenging environments.

7. 문제 해결

8. 사양

9. 보증 정보

NVX products are designed and manufactured to the highest quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official NVX web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

10. 고객 지원

If you encounter any issues or have questions regarding your NVX VUBT2 Bluetooth Audio Receiver that are not covered in this manual, please contact NVX customer support for assistance.

• 온라인 지원: Visit the official NVX webFAQ, 지원 리소스, 연락처 정보를 제공하는 사이트입니다.
• 판매자 지원: For purchase-related inquiries, contact the seller directly.