IKEA KALLAX Caster Set, Silver - Instruction Manual

1. 제품 오버view

This IKEA KALLAX Caster Set is designed to add mobility to your KALLAX storage unit. The set includes wheels that are mounted on a rail for enhanced stability. One of the wheels features a locking mechanism, allowing you to secure the unit in a stationary position when needed.

Image showing a white IKEA KALLAX shelving unit with silver caster wheels installed on its base, demonstrating how the unit becomes mobile.

2. 안전 정보

• Ensure all components are securely fastened before placing items on the KALLAX unit or moving it.
• Do not exceed the recommended load capacity of your KALLAX unit or the casters. Refer to your KALLAX unit's manual for specific load limits.
• Always engage the locking mechanism on the caster when the unit is in its desired stationary position to prevent unintended movement.
• Avoid sudden impacts or excessive force when moving the unit.

3. 패키지 내용

조립을 시작하기 전에 모든 부품이 있는지 확인하십시오.

• 1x Set of KALLAX Caster Wheels (4 pieces, including one lockable wheel)
• 장착 하드웨어(나사, 와셔 등)

4. 설치 및 조립 지침

Follow these steps to attach the caster set to your KALLAX unit:

1. Carefully lay your KALLAX unit on its side or back on a soft, clean surface to prevent scratches.
2. Identify the designated mounting points on the bottom edge of your KALLAX unit. The casters are designed for rail mounting along the base.
3. Position each caster plate against the designated mounting area. Ensure the holes on the caster plate align with the pre-drilled holes on the KALLAX unit.
4. Insert the provided screws through the caster plate and into the KALLAX unit.
5. Using a screwdriver, tighten each screw firmly. Do not overtighten, as this may damage the unit.
6. Repeat the process for all four casters. Ensure the lockable caster is placed in an easily accessible position.
7. Once all casters are securely attached, carefully return the KALLAX unit to its upright position.

자세한 view of one silver caster wheel, showing its attachment mechanism to the bottom edge of a white KALLAX shelving unit.

5. 사용 설명서

• To Move the Unit: Ensure the locking mechanism on the lockable caster is disengaged. Gently push or pull the KALLAX unit to its desired location.
• To Secure the Unit: Once the KALLAX unit is in its desired position, engage the locking mechanism on the designated lockable caster. This will prevent the unit from rolling unintentionally.

6. 유지관리

• 모든 나사와 패스너가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
• Clean the wheels and caster housing with a damp cloth to remove dust, dirt, or debris that may affect smooth operation.
• Avoid exposing the casters to excessive moisture, harsh cleaning chemicals, or extreme temperatures.

7. 문제 해결

• Unit does not move smoothly: Check for any debris (e.g., hair, lint) caught in the wheels. Ensure all caster locks are fully disengaged.
• Unit is unstable or wobbly: Verify that all casters are securely attached and that all mounting screws are tightened. Ensure the KALLAX unit itself is properly assembled according to its own instructions.
• Caster lock not holding: Inspect the locking mechanism for any visible damage or obstruction. Ensure it is fully engaged.

8. 사양

9. 보증 및 지원

보증 범위, 반품 또는 추가 제품 지원에 대한 정보는 공식 IKEA를 참조하세요. web웹사이트를 방문하거나 IKEA 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.