Weiser Augusta Handle Set Instruction Manual

소개

The Weiser Augusta Handle Set is a stylishly designed exterior door lock system from the Welcome Home series, engineered to provide maximum-security protection for your home. This handleset features a satin nickel finish, offering a modern aesthetic. It can be securely locked or unlocked using a key from the outside, or with a key or turnpiece from the inside. This manual provides comprehensive instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your handle set.

Figure 1: Weiser Augusta Handle Set components, including the exterior handleset with deadbolt and the interior lever, all in a satin nickel finish.

설정 및 설치

This section outlines the steps required to properly install your Weiser Augusta Handle Set. Ensure you have all necessary tools before beginning the installation process.

필요한 도구:

• 십자 드라이버
• 줄자
• 연필
• Drill (if new door preparation is needed)

설치 단계:

1. 문 준비: Ensure your door has a 2-1/8 inch cross bore for the handleset. If installing on a new door, follow standard door preparation guidelines for bore holes and backset.
2. Install the Latch and Deadbolt: Insert the latch and deadbolt mechanisms into the door edge. Secure them with the provided screws. Ensure the latch bolt is facing the correct direction for your door swing.
3. Assemble Exterior Handleset: Place the exterior handleset through the bore holes, aligning it with the latch and deadbolt.
4. Assemble Interior Components: Attach the interior mounting plate and lever assembly. Secure all components with the long through-bolts and screws provided.
5. 테스트 작업: Before closing the door, test the deadbolt and latch operation with the key from the outside and the turnpiece/key from the inside. Ensure smooth engagement and retraction.
6. 스트라이크 플레이트를 설치하세요: Install the strike plates on the door frame, aligning them with the latch and deadbolt. Ensure a secure and flush fit.

작동 지침

The Weiser Augusta Handle Set is designed for ease of use and enhanced security.

잠금 및 잠금 해제:

• 외부에서: Insert the key into the deadbolt cylinder and turn to lock or unlock. The handle below the deadbolt is a pull handle and does not require a key for entry once the deadbolt is unlocked.
• 인테리어에서: Use the turnpiece on the deadbolt to lock or unlock. The interior lever operates the latch for entry/exit.

SmartKey Re-key Technology:

This handle set features SmartKey re-key technology, allowing you to re-key the lock yourself in seconds. This is useful if you want to match your lock to an existing key or if you lose a key and want to change the lock's keying.

1. 현재 키를 삽입하세요: Insert your currently working key fully into the SmartKey cylinder.
2. 턴키 방식: Rotate the key 90 degrees clockwise.
3. SmartKey 도구를 삽입하세요: While the key is turned, insert the SmartKey tool firmly and fully into the small hole on the cylinder face.
4. Remove Current Key: Remove the current key while keeping the SmartKey tool inserted.
5. 새 키 삽입: Insert your new key fully into the cylinder.
6. Remove SmartKey Tool: SmartKey 도구를 제거하세요.
7. 새 키 테스트: Rotate the new key 180 degrees counter-clockwise to the original position, then remove it. Test the new key to ensure it operates the lock smoothly.

For a visual guide, please refer to the official Weiser SmartKey re-keying video tutorials available on the Weiser website or authorized channels. (Note: No video provided in JSON, so this is a general suggestion).

유지

Proper maintenance will ensure the longevity and smooth operation of your Weiser Augusta Handle Set.

• 청소: 부드러운 천으로 외부 표면을 청소하세요.amp 천으로 닦으십시오. 연마성 세척제, 용제 또는 독한 화학 물질은 새틴 니켈 마감을 손상시킬 수 있으므로 사용하지 마십시오.
• 매끄럽게 하기: Periodically apply a silicone-based lubricant (do not use oil-based lubricants) to the internal mechanisms of the lock and deadbolt to ensure smooth operation. Apply sparingly into the keyway and latch bolt.
• 나사 조이기: Over time, screws may loosen. Periodically check and tighten all mounting screws to ensure the handleset remains securely fastened to the door. Do not overtighten.

문제 해결

This section addresses common issues you might encounter with your Weiser Augusta Handle Set.

If you continue to experience issues after attempting these solutions, please contact Weiser customer support.

명세서

보증 및 지원

Weiser stands behind the quality of its products. Your Augusta Handle Set comes with a comprehensive warranty.

보증 정보:

이 제품은 제한된 평생 보증. This warranty covers defects in material and workmanship for the lifetime of the original residential user. For full details regarding warranty coverage, limitations, and claims procedures, please refer to the official Weiser web사이트를 방문하거나 고객 지원팀에 문의하세요.

고객 지원:

For technical assistance, warranty claims, or general inquiries, please contact Weiser customer support through their official channels:

• Web대지: Visit the official Weiser webFAQ, 제품 등록, 문의 양식을 제공하는 사이트입니다. www.weiserlock.com
• 핸드폰: Refer to the Weiser web지역 고객 서비스 전화번호를 알려주는 사이트입니다.

When contacting support, please have your product model number (GLA9471 A/A15 SMT VS) and purchase information readily available.