소개
The Mount Plus 201F VESA Adapter Bracket is designed to expand the VESA mounting pattern of an existing TV wall mount or stand. This adapter allows a mount with a 200x200mm VESA pattern to accommodate televisions requiring 300x300mm or 400x400mm VESA patterns. It is compatible with most flat panel TVs ranging from 32 to 55 inches.
Please read these instructions carefully before installation to ensure proper and safe use of the product.
안전 정보
- 중량 용량: Ensure that your existing TV mount or stand can support the weight of your television, including the adapter brackets. Exceeding the weight capacity can result in instability and potential damage or injury.
- 구조적 무결성: Verify that the wall or surface where the TV mount is installed can safely support the combined weight of the TV and mounting hardware.
- 하드웨어: Use only the provided hardware or appropriate alternatives as specified in these instructions. Incorrect hardware may compromise the stability of the installation.
- 전문적인 설치: 설치 과정 중 확실하지 않은 부분이 있으면 자격을 갖춘 전문가에게 문의하십시오.
- 어린이들: Keep all components and packaging materials away from children to prevent choking hazards.
패키지 내용
Please check to ensure all components are present and undamaged before proceeding with installation.
- 4 x VESA Adapter Brackets (Alloy Steel)
- Assorted Screws and Washers for TV attachment
- Assorted Spacers
- Nuts for securing brackets
Figure 1: Included hardware and adapter brackets.
설정 및 설치
This section provides instructions for attaching the Mount Plus 201F adapter brackets to your existing TV mount and television.
Understanding VESA Patterns
VESA (Video Electronics Standards Association) defines standard mounting hole patterns for TVs and monitors. The 201F adapter converts a 200x200mm pattern to larger 300x300mm or 400x400mm patterns.
Figure 2: VESA pattern conversion illustration.
설치 단계
- Prepare Your TV Mount: Ensure your existing TV mount is securely installed and capable of supporting the weight of your television.
- Attach Adapter Brackets to Existing Mount:
Align the four Mount Plus adapter brackets with the 200x200mm mounting holes on your existing TV mount. Use the appropriate screws and nuts provided to secure the adapter brackets to the mount. Ensure they are tightened firmly but do not overtighten.
Figure 3: Adapter brackets attached to a central mounting plate (representing your existing mount).
- Determine TV VESA Pattern: Identify the VESA mounting pattern on the back of your television. This will typically be 300x300mm or 400x400mm for TVs compatible with this adapter.
- Attach TV to Adapter Brackets:
Carefully position your television against the adapter brackets. Align the TV's VESA mounting holes with the appropriate slots on the adapter brackets. Use the provided screws and spacers that fit your TV's mounting holes. The spacers are crucial to ensure a proper fit and prevent damage to the TV or brackets.
메모: Some users have found it beneficial to add additional washers between the screw heads and the bracket slots to increase the bearing surface and prevent slippage. While not explicitly included, this can enhance stability.
- TV를 보호하세요: Tighten all screws connecting the TV to the adapter brackets. Ensure the TV is level and securely fastened. Do not overtighten, as this can strip threads or damage the TV.
- 최종 확인: Gently test the stability of the mounted TV. Ensure all connections are secure and there is no wobbling or excessive movement.
운영
The Mount Plus 201F VESA Adapter Bracket is a passive component designed to facilitate compatibility between different VESA mounting patterns. It does not have any operational functions. Once installed, its purpose is to securely hold the television in place on the existing mount.
유지
- 청소: Wipe the adapter brackets with a soft, dry cloth to remove dust. Avoid abrasive cleaners or solvents.
- 정기 검사: 모든 나사와 연결부가 단단히 조여져 있는지 주기적으로 점검하십시오. 시간이 지남에 따라 진동이나 조정으로 인해 고정 장치가 헐거워질 수 있습니다.
- 손상: If any part of the adapter bracket becomes bent, cracked, or otherwise damaged, discontinue use immediately and replace the component.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| TV does not fit the adapter. | Incorrect VESA pattern on TV or mount. | Verify your TV's VESA pattern (should be 300x300mm or 400x400mm) and your existing mount's pattern (should be 200x200mm). This adapter is specifically for these conversions. |
| TV가 불안정하거나 흔들리는 느낌이 듭니다. | Loose screws or incorrect installation. | Re-check all connections, ensuring screws are tightened securely. Ensure spacers are used correctly. Verify the existing mount's stability and weight capacity. |
| Screws for TV attachment slip through bracket slots. | Screw head diameter is too small for the slot. | Add additional washers (not included) between the screw head and the bracket slot to increase the bearing surface and prevent slippage. |
명세서
- 모델: 201F
- 상표: 마운트 플러스
- 재료: 합금강
- 색상: 검은색
- Product Dimensions (per bracket): 10.2 x 1.6 x 2.4 인치
- Item Weight (total): 약 0.4kg(13.93온스)
- VESA 호환성: Converts 200x200mm to 300x300mm and 400x400mm
- TV 크기 호환성: Most 32" to 55" Flat Panel TVs
- 단위 수: 4개의 브라켓
보증 및 지원
For warranty information or technical support regarding your Mount Plus 201F VESA Adapter Bracket, please contact Mount Plus customer service directly. Refer to the contact information provided with your purchase or visit the official Mount Plus web대지.