ASUS uATX X99-M WS Motherboard User Manual

1. 서론

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your ASUS uATX X99-M WS motherboard. Designed for high performance and reliability, this microATX board integrates advanced features such as 5-Way Optimization, ASUS OC Socket, USB 3.1, and 802.11ac Wi-Fi, complemented by server-grade components for enhanced stability.

2. 설정

최적의 성능을 위해서는 올바른 설치가 매우 중요합니다. 다음 단계를 주의 깊게 따르세요.

1. 섀시 준비: Ensure your computer chassis is compatible with the microATX form factor. Install standoffs in the appropriate locations within the chassis.
2. CPU 설치: Carefully align your LGA 2011-3 CPU with the OC Socket on the motherboard. Lower the CPU into the socket, ensuring it is seated correctly, then secure it with the retention levers.
3. CPU 쿨러 설치: Apply thermal paste to the CPU and install the compatible CPU cooler according to its manufacturer's instructions. Connect the CPU fan cable to the CPU_FAN header on the motherboard.
4. 메모리 모듈(RAM) 설치: This motherboard supports DDR4 RAM. Insert the memory modules into the DIMM slots (DIMM_A1, DIMM_B1, DIMM_C1, DIMM_D1) by aligning the notch on the module with the key in the slot and pressing down firmly until the clips lock into place. Refer to the motherboard layout for recommended dual-channel or quad-channel configurations.
5. 마더보드 장착: Carefully place the motherboard into the chassis, aligning the screw holes with the installed standoffs. Secure the motherboard using screws.
6. 전원 공급 장치 연결: Connect the 24-pin ATX power connector (EATXPWR) and the 8-pin ATX 12V power connector (EATX12V) from your power supply unit (PSU) to the corresponding headers on the motherboard.
7. 확장 카드 설치: Insert your PCI Express 3.0 x16 graphics cards or other expansion cards into the appropriate PCIEX16 slots. Ensure they are fully seated and secured with the chassis retention mechanism.
8. 저장 장치 연결: Connect SATA data cables from your storage drives (HDDs/SSDs) to the SATA 6Gb/s ports on the motherboard. If using an M.2 SSD, install it into the M.2 Support slot and secure it.
9. 전면 패널 케이블 연결: Connect the power button, reset button, HDD LED, power LED, and front panel USB/audio connectors from your chassis to the corresponding headers on the motherboard. Pay close attention to polarity for LEDs.
10. 주변기기 연결: 모니터, 키보드, 마우스 및 기타 주변 장치를 마더보드 후면 I/O 패널의 해당 포트에 연결합니다.

그림 1: 위에view of the ASUS uATX X99-M WS Motherboard. Key components visible include the LGA 2011-3 CPU socket, DDR4 DIMM slots, PCI Express x16 slots, M.2 support, SATA 6Gb/s ports, and various power connectors and headers. The integrated Wi-Fi module and Crystal Sound 2 audio components are also highlighted.

3. 운영

모든 구성 요소가 설치 및 연결되면 시스템 전원을 켤 수 있습니다.

1. 전원 켜기: Ensure the power supply switch is in the 'ON' position. Press the power button on your computer chassis. The system should initiate the boot process.
2. BIOS/UEFI 설정: During startup, press the designated key (usually DEL or F2) to enter the BIOS/UEFI setup utility. Here, you can configure system settings, boot order, and enable features like ASUS 5-Way Optimization for performance tuning.
3. 운영 체제 설치: Install your preferred operating system (e.g., Windows 10) by booting from an installation media (USB drive or DVD).
4. 드라이버 설치: After OS installation, install the latest drivers for your motherboard components (chipset, audio, LAN, Wi-Fi, USB 3.1) from the ASUS support web해당 사이트 또는 제공된 드라이버 디스크를 사용하십시오.

4. 유지관리

정기적인 유지보수는 마더보드의 수명 연장과 안정적인 작동을 보장하는 데 도움이 됩니다.

• 먼지 제거: Periodically clean dust from the motherboard and components using compressed air. Accumulation of dust can lead to overheating and reduced performance.
• 부품 검사: Visually inspect all connections and components for any signs of wear, damage, or loose connections.
• BIOS/UEFI 업데이트: ASUS 지원을 확인하세요 website for the latest BIOS/UEFI updates. Updates can improve system stability, compatibility, and performance. Follow the update instructions provided by ASUS carefully.

5. 문제 해결

문제가 발생하면 다음의 일반적인 문제 해결 단계를 고려하세요.

• 전원 없음/부팅 불가:
  • 모든 전원 케이블(24핀 ATX, 8핀 ATX 12V)이 마더보드와 파워서플라이에 제대로 연결되어 있는지 확인하십시오.
  • 전원 스위치가 '켜짐' 위치에 있는지 확인하십시오.
  • 전면 패널 연결부, 특히 전원 버튼 헤더를 확인하십시오.
  • Reseat RAM modules. Incorrectly seated RAM is a common cause of no-boot issues.
  • Check the Q-Code LED on the motherboard for diagnostic codes that can indicate the source of the problem.
• 시스템 불안정/충돌:
  • 모든 운전자가 최신 정보를 갖추고 있는지 확인하세요.
  • CPU와 GPU 온도를 확인하세요. 과열은 시스템 불안정을 초래할 수 있습니다.
  • Test memory modules individually to identify a faulty stick.
  • BIOS 설정을 기본값으로 재설정합니다.
• 주변 장치가 감지되지 않음:
  • 주변기기가 올바른 포트에 제대로 연결되었는지 확인하십시오.
  • 주변 장치에 맞는 드라이버를 설치하거나 업데이트합니다.
  • Test the peripheral on another system or try a different port on your motherboard.

6. 사양

7. 보증 및 지원

보증 정보 및 기술 지원에 대해서는 공식 ASUS를 참조하십시오. website or contact ASUS customer service. A detailed User Manual (PDF) is also available for download from the product's support page, providing in-depth information on advanced configurations and features.

메모: The official User Manual (PDF) can be found at: ASUS X99-M WS User Manual (PDF)