1. 서론
Thank you for choosing the Aqualux Pool Blaster Max Li. This cordless electric vacuum cleaner is designed for efficient and convenient cleaning of pools and spas. Its powerful suction and battery operation allow for thorough cleaning without the need for hoses or external power sources. Please read this manual carefully before operating the device to ensure proper use and maintenance.
2. 안전 정보
- Always disconnect the charger from the unit before use or maintenance.
- Do not operate the vacuum out of water. The motor is designed for underwater use and requires water for cooling.
- 손, 머리카락, 헐렁한 옷 등을 움직이는 부품에 가까이 두지 마십시오.
- Do not allow children to operate this device. Adult supervision is required.
- 제품에 동봉된 충전기만 사용하십시오.
- 사용하지 않을 때에는 장치를 서늘하고 건조한 곳에 보관하십시오.
- Do not attempt to open or repair the battery pack or motor housing. Refer all servicing to qualified personnel.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Pool Blaster Max Li Vacuum Unit
- 충전식 리튬 이온 배터리(내장형)
- 배터리 충전기
- Reusable Filter Bag
- Adjustable Wide Head
- Pole Adapter (for standard telescopic poles)
4. 제품 오버view
Familiarize yourself with the main components of your Pool Blaster Max Li.
Figure 4.1: The Aqualux Pool Blaster Max Li cordless vacuum cleaner, showing its ergonomic design and attachment points.
The unit consists of the main body housing the motor and battery, a removable filter bag compartment, and an adjustable wide head for efficient debris collection. The charging port is located on the main body.
5. 설정 및 충전
5.1. 배터리 충전
Before first use, fully charge the battery. The charging port is designed for secure connection.
Figure 5.1: Detail of the charging port on the vacuum unit.
Figure 5.2: Connecting the charger to the Pool Blaster Max Li. Ensure a firm connection.
- Locate the charging port on the vacuum unit.
- Connect the charger cable to the port.
- 충전기를 표준 전기 콘센트에 꽂습니다.
- Allow 8-10 hours for a full charge. The indicator light on the charger will change when charging is complete (refer to charger instructions for specific light behavior).
5.2. 조립
- Insert the reusable filter bag into its designated compartment. Ensure it is securely seated.
- Attach the adjustable wide head to the front of the vacuum unit. It should click into place.
- If using with a telescopic pole, attach the pole adapter to the vacuum unit, then slide your standard telescopic pole into the adapter.
6. 운영
The Pool Blaster Max Li is designed for easy underwater operation.
Figure 6.1: The vacuum unit submerged and actively cleaning the pool floor.
Figure 6.2: The vacuum effectively collecting various debris from the pool bottom.
Figure 6.3: The vacuum in operation, demonstrating the water flow and suction capability.
- 배터리가 완전히 충전되었는지 확인하십시오.
- Submerge the vacuum unit completely in the water. Ensure no air is trapped inside.
- Turn on the unit using the power switch (location may vary, typically near the handle).
- Slowly guide the vacuum across the pool or spa surfaces you wish to clean. Overlap passes to ensure complete coverage.
- The vacuum will collect debris into the filter bag. Monitor the suction power; if it decreases, the filter bag may need emptying.
- After cleaning, turn off the unit before removing it from the water.
- Remove the unit from the water and immediately proceed to maintenance.
7. 유지관리
Regular maintenance ensures optimal performance and extends the life of your Pool Blaster Max Li.
7.1. 필터백 청소
The filter bag should be cleaned after each use or when suction power diminishes.
- Remove the filter bag from the vacuum unit.
- Empty collected debris into a waste receptacle.
- Rinse the filter bag thoroughly with a garden hose or under a faucet until clean.
- Allow the filter bag to air dry completely before storing or reinserting.
7.2. Unit Cleaning and Storage
- Rinse the exterior of the vacuum unit with fresh water after each use.
- Wipe down the unit with a soft cloth.
- Ensure the unit is completely dry before charging or storing.
- Store the vacuum in a cool, dry place, away from direct sunlight and extreme temperatures.
- Recharge the battery regularly, even during periods of non-use, to maintain battery health.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 진공이 켜지지 않습니다. | 배터리가 충전되지 않았습니다. | 배터리를 8 ~ 10 시간 동안 충전하십시오. |
| 전원 스위치가 꺼져 있습니다. | 전원 스위치가 'ON' 위치에 있는지 확인하세요. | |
| 흡입력이 낮습니다. | 필터백이 가득 찼거나 막혔습니다. | Empty and clean the filter bag thoroughly. |
| Debris lodged in suction intake. | Turn off the unit and remove any obstructions from the intake. | |
| 배터리 충전량이 부족합니다. | 배터리를 충전하세요. | |
| 작동 중에 장치가 멈춥니다. | 배터리가 소진되었습니다. | 배터리를 충전하세요. |
| 과열 보호 기능이 활성화되었습니다. | Turn off the unit, remove from water, and allow it to cool down for 30 minutes before restarting. Ensure it is fully submerged during operation. |
9. 기술 사양
- 모델: 네브4382
- 상표: 아쿠아럭스
- 전원: 배터리 구동
- 배터리 유형: 리튬이온
- 배터리 용량tage: 18 볼트
- 실행 시간: Up to 1 hour (on full charge)
- 충전 시간: 8-10시간
- Cleaning Surface Area: Approximately 164.5 m³/h
- 품목 무게: 3.2 킬로그램
- 치수(길이 x 너비 x 높이): 45.97cm x 27.18cm x 20.57cm
- Suction Head Width: 27.3cm
- 최소 수심: 40cm
- 재료: 플라스틱
- 색상: 파란색
- 한국어: 894331001016
10. 보증 및 고객 지원
For warranty information or customer support, please refer to the documentation provided with your purchase or contact Aqualux customer service through their official web해당 웹사이트 또는 공인 판매점에서 구입하십시오. 보증 청구를 위해 구매 증빙 자료를 보관하십시오.