클리어오디오 컨셉 MM 턴테이블 사용 설명서

1. 서론

The Clearaudio Concept MM Turntable is an exceptional audio component designed to deliver high-fidelity sound reproduction from your vinyl records. Featuring an exclusive magnetic bearing system and a pre-mounted Classic MM cartridge, this turntable offers a refined and dynamic listening experience. Its robust construction, utilizing high-quality alloy and engineered wood, ensures stable and precise playback.

주요 특징은 다음과 같습니다.

• Pre-mounted Classic MM (Moving Magnet) cartridge for immediate use.
• Exclusive magnetic bearing for ultra-low friction and smooth platter rotation.
• Belt-drive motor for stable speed and reduced vibrations.
• Integrated tonearm (CF tonearm) designed for optimal tracking.

2. 상자 안에 무엇이 들어있나요?

포장을 풀 때 모든 구성품이 들어 있고 상태가 양호한지 확인하세요.

• Clearaudio Concept MM Turntable unit
• Pre-mounted Classic MM cartridge/stylus
• 먼지 커버
• Power supply unit (with cable)
• 드라이브 벨트
• 플래터

누락되거나 손상된 품목이 있는 경우 즉시 대리점에 문의하십시오.

3. 설정 가이드

Careful setup is crucial for optimal performance of your Clearaudio Concept MM Turntable.

3.1 배치

Choose a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.

3.2 포장 풀기 및 조립

1. Gently remove the turntable from its packaging.
2. Place the main plinth on your chosen surface.
3. Carefully place the platter onto the spindle. The magnetic bearing system will guide it into place.
4. 모터 풀리와 플래터 안쪽 가장자리에 구동 벨트를 설치하십시오.
5. 턴테이블 위에 먼지 커버를 씌웁니다.

3.3 Tonearm and Cartridge Adjustment

Your Clearaudio Concept MM Turntable comes with a pre-mounted Classic MM cartridge. While factory-set, fine-tuning may be required for optimal sound and stylus longevity.

• 추적력: The recommended tracking force for the Classic MM cartridge is typically around 2.0 grams. Due to the magnetic suspension, it is recommended to set the tracking force at the height of the platter for accurate readings. Use a digital stylus force gauge for precision.
• 안티 스케이팅: The anti-skating adjustment is located underneath the base of the platter. This adjustment counteracts the inward force on the tonearm, ensuring even wear on the stylus and proper channel balance. Adjust it carefully while playing a record or using a test record.
• VTA (Vertical Tracking Angle) / Azimuth: These are typically factory-set for the pre-mounted cartridge. Refer to advanced setup guides if further adjustment is desired.

그림 3.1: 이상view of the Clearaudio Concept MM Turntable, showing the platter, tonearm, and speed selection knob.

3.4 연결성

Connect the turntable to your audio system:

1. Connect the RCA audio cables from the turntable's output to the "Phono MM" input on your amplifier or AV receiver. If your amplifier does not have a dedicated "Phono MM" input, you will need an external phono preamp리퍼.
2. 턴테이블의 접지선을 본체의 접지 단자에 연결하세요. amp리파이어 또는 포노 프리amp험 노이즈를 최소화하기 위한 증폭기.

3.5 전원 연결

Connect the power supply unit to the turntable's power input, then plug it into a suitable wall outlet. Ensure the power switch is in the OFF position before connecting.

4. 사용 설명서

4.1 전원 켜기/끄기

Locate the power switch, typically integrated with the speed selection knob. Turn the knob to the desired speed (33, 45, or 78 RPM) to power on the turntable. Turn it to the 'Off' position to power off.

4.2단 속도 선택

The Clearaudio Concept MM Turntable supports multiple playback speeds:

• 33 ⅕ RPM: For standard LPs (Long Play records).
• 45RPM: For singles and some audiophile pressings.
• 78RPM: For shellac records (requires a dedicated 78 RPM stylus, not included).

Select the appropriate speed using the control knob on the plinth.

4.3 레코드 재생하기

1. 플래터에 레코드를 놓습니다.
2. Select the correct playback speed.
3. 큐잉 레버를 사용하여 톤암을 들어 올리십시오.
4. Carefully position the tonearm over the desired starting groove of the record.
5. 큐잉 레버를 천천히 내려 스타일러스가 레코드판 위로 내려가도록 하십시오.
6. 볼륨을 조정하십시오. amp리퍼.

4.4 재생 중지

1. 큐잉 레버를 사용하여 톤암을 들어 올리십시오.
2. 톤암을 제자리로 돌려놓으십시오.
3. 큐잉 레버를 내리세요.
4. Turn the speed selection knob to the 'Off' position to power down the turntable.
5. Replace the dust cover to protect the turntable from dust.

5. 유지관리

Regular maintenance will ensure the longevity and optimal performance of your turntable.

• 먼지 커버: Always use the dust cover when the turntable is not in use to prevent dust accumulation on the platter, tonearm, and stylus.
• Cleaning the Plinth and Platter: Use a soft, dry, lint-free cloth to wipe down the plinth and platter. Avoid abrasive cleaners or solvents.
• 스타일러스 청소: Gently clean the stylus regularly using a dedicated stylus brush or cleaning fluid. Always brush from back to front.
• 안전 벨트: Periodically inspect the drive belt for wear or stretching. Replace it if it appears loose or cracked, as this can affect speed stability.
• 카트리지 교체: The stylus (needle) of your cartridge will wear over time. Consult a professional or refer to the cartridge manufacturer's guidelines for replacement intervals.

6. 문제 해결

다음은 몇 가지 일반적인 문제와 이에 대한 잠재적 해결책입니다.

If the problem persists, please contact your authorized Clearaudio dealer or support.

7. 사양

8. 보증 및 지원

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Clearaudio dealer. Clearaudio products are known for their quality and durability, and support is available through their official channels.

For technical assistance or service inquiries, please contact your local Clearaudio distributor or visit the official Clearaudio web연락처 정보 사이트.