Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) Instruction Manual

소개

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E). Please read all instructions carefully before beginning installation to ensure correct assembly and to prevent damage or injury. Keep this manual for future reference.

패키지 내용:

• Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount
• 설치용 하드웨어 키트(다양한 나사, 앵커, 와셔)
• High Speed HDMI Cable (1080p 1.4v)
• 6-inch Tri-axis Spirit Level
• 사용 설명서

그림 1: Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) components, including the main mount assembly, VESA plate, and accessories like the spirit level and HDMI cable.

중요한 안전 정보

경고: 이 지침을 읽고 따르지 않을 경우 심각한 부상, 재산 피해 또는 보증 무효화가 발생할 수 있습니다.

• 구조적으로 불안정한 벽에는 이 제품을 설치하지 마십시오. 설치 표면이 마운트와 TV의 총 무게를 견딜 수 있는지 확인하십시오.
• 스터드 탐지기를 사용하여 목재 스터드를 찾거나 콘크리트/벽돌처럼 단단한 곳에 설치하십시오.
• 최대 하중 용량인 36.2kg(80lbs)을 초과하지 마십시오.
• 이 제품은 실내에서만 사용하도록 설계되었습니다.
• Ensure all screws are securely tightened, but do not overtighten.
• 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
• 설치 과정 중 확실하지 않은 부분이 있으면 자격을 갖춘 전문가에게 문의하십시오.

명세서

그림 2: Key specifications of the Invision HDTV-E mount, including load capacity (36.2kg), minimum wall profile (55mm), and maximum extension (500mm).

설정 및 설치

1. 설치 전 체크리스트

• Verify VESA Compatibility: Check the back of your TV for four mounting holes. Measure the horizontal and vertical distance between these holes. This mount supports VESA patterns from 100x100mm to 400x400mm. Note: Not suitable for 75x75mm VESA.
• 벽 유형: Determine if your wall is wood stud, solid concrete, or brick. Different mounting hardware is required.
• 필요한 도구: Pencil, drill, stud finder (for wood studs), level (included), measuring tape, socket wrench, screwdriver.
• 무게 확인: Ensure your TV's weight does not exceed 36.2kg (80lbs).

그림 3: Guide to checking VESA compatibility. Measure the distance between mounting holes to determine your TV's VESA pattern. The image illustrates how to measure width and height for VESA standards.

2. Attaching the TV Brackets to Your Television

1. 화면 손상을 방지하기 위해 TV를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.
2. Identify the correct screws (M4, M6, or M8) from the hardware kit that fit your TV's mounting holes. Use washers if necessary.
3. Attach the two vertical TV brackets to the back of your television using the selected screws. Ensure they are securely fastened but do not overtighten. The brackets should be centered horizontally on the TV.

3. Mounting the Wall Plate to the Wall

1. 장착 높이 결정: Decide on the desired height for the top of your TV. Mark this on the wall.
2. (목재 스터드 벽의 경우) 스터드 위치를 찾으세요: Use a stud finder to locate the center of two adjacent wood studs. Mark these locations.
3. 벽 플레이트 위치: Hold the wall plate against the wall at the desired height, aligning it with the marked stud centers. Use the included spirit level to ensure it is perfectly horizontal. Mark the drill holes.
4. 드릴 파일럿 홀:
   • For wood studs: Drill pilot holes using a 5.5mm (7/32 inch) drill bit to a depth of 60mm (2.36 inches).
   • For solid concrete/brick: Drill pilot holes using a 10mm (3/8 inch) drill bit to a depth of 70mm (2.75 inches). Insert concrete anchors into the holes.
5. 안전한 벽면 플레이트: Attach the wall plate to the wall using the lag bolts and washers provided. Tighten all bolts firmly.

4. 텔레비전 걸기

1. 도움을 받아 브래킷이 부착된 TV를 조심스럽게 들어 올리세요.
2. TV 브래킷을 벽면 플레이트에 걸어 고정하세요. TV가 벽면 플레이트에 단단히 고정되었는지 확인하세요.
3. Engage the safety locking screws or mechanisms on the bottom of the TV brackets to prevent accidental dislodging.

작동 지침

The Invision HDTV-E mount offers flexible viewing options with its tilt and swivel capabilities.

그림 4: The mount's design allows for extensive swivel and tilt adjustments, providing optimal view방 안의 다양한 위치에서 각도를 측정합니다.

Adjusting Swivel

Gently grasp the sides of your television and carefully pull it away from the wall. You can then pivot the TV left or right to achieve your desired viewing angle. The mount allows for a wide range of swivel motion, up to 500mm (19.7 inches) extension from the wall.

기울기 조정

To adjust the vertical tilt, gently push the top or bottom of the television forward or backward. The mount supports a tilt angle of 5 to 8 degrees. The lockable tilt mechanism ensures the TV stays at your chosen angle.

케이블 관리

The mount features integrated cable management covers on the arms. Route your cables (including the included HDMI cable) through these covers to keep them organized and out of sight, ensuring a clean installation.

그림 5: 상세한 view of the mount's cable management system and the lockable tilt mechanism, designed for a tidy and secure setup.

유지

• 정기 검사: Periodically check all mounting screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause them to loosen slightly.
• 청소: 부드럽고 마른 천으로 마운트를 닦으십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 용제 사용은 피하십시오.
• 매끄럽게 하기: The moving parts of the mount are designed for smooth operation and generally do not require lubrication. If you notice any stiffness, contact customer support.
• 중량 제한: Never exceed the maximum weight capacity of 36.2kg (80lbs).

문제 해결

보증 정보

The Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) comes with a 25년 제품 보증. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

For warranty claims or further details, please contact Invision customer support.

고객 지원

If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Invision Technology (UK) Ltd. customer support.

제조업체: Invision Technology (UK) Ltd

국제 무역 식별 번호(GTIN): 05060264551392

Please refer to the product packaging or the official Invision web최신 연락처 정보는 사이트에서 확인하세요.

그림 6: Product packaging displaying manufacturer information and contact details for Invision Technology (UK) Ltd.