Baseus NGW01-01

Baseus Encok W01 True Wireless 이어폰 사용 설명서

Model: NGW01-01

소개

Thank you for choosing the Baseus Encok W01 True Wireless Earphones. This manual provides essential information for the safe and efficient use of your device. Please read it thoroughly before operation and retain it for future reference.

안전 정보

  • 이어폰이나 충전 케이스를 극한의 온도, 습도 또는 부식성 환경에 노출시키지 마십시오.
  • 기기를 떨어뜨리거나 충격을 주거나 분해하지 마십시오.
  • 기기를 어린이와 애완동물의 손이 닿지 않는 곳에 보관하세요.
  • 제공되거나 인증된 충전 케이블과 어댑터만 사용하세요.
  • Prolonged exposure to loud volume may cause hearing damage. Adjust volume to a safe level.
  • 주변 소리를 듣지 못하면 위험할 수 있는 상황(예: 운전, 자전거 타기, 교통량이 많은 곳에서 걷기)에서는 이어폰을 사용하지 마십시오.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

  • Baseus Encok W01 True Wireless Earphones (Left and Right)
  • 충전 케이스
  • USB 충전 케이블
  • 사용자 설명서

제품 끝view

Familiarize yourself with the components of your Baseus Encok W01 earphones and charging case.

Baseus Encok W01 Earphones in Charging Case

Image: Baseus Encok W01 earphones placed inside their charging case, with the lid open. The case shows charging contacts and a USB port.

Baseus Encok W01 Charging Case with lid open

Image: The Baseus Encok W01 charging case with its lid open, revealing the earbud compartments and the charging port at the front.

이어폰 구성 요소:

  • 다기능 터치 버튼: 재생, 통화 및 음성 비서 제어에 사용됩니다.
  • LED 표시등: 전원 및 페어링 상태를 표시합니다.
  • 마이크로폰: 통화 및 음성 명령에 사용.
  • 충전 연락처: 케이스 내부에서 충전합니다.
  • 이어팁: 안전하고 편안한 착용감을 제공합니다.
Close-up of Baseus Encok W01 earphone

이미지: 클로즈업 view of a single Baseus Encok W01 earphone, highlighting the multi-function button and the Baseus logo.

충전 케이스 구성 요소:

  • 충전 포트: USB 충전 케이블을 연결합니다.
  • 배터리 표시기: 충전 케이스의 배터리 잔량을 표시합니다.
  • 이어폰 충전 슬롯: 이어폰을 안전하게 고정하고 충전합니다.

설정

1. 이어폰 및 케이스 충전

처음 사용하기 전에 이어폰과 충전 케이스를 완전히 충전하세요.

  1. 이어폰을 충전 케이스에 넣으세요. 이어폰이 각 슬롯에 제대로 장착되었는지 확인하세요.
  2. USB 충전 케이블을 케이스의 충전 포트와 전원(예: USB 벽면 어댑터, 컴퓨터 USB 포트)에 연결하세요.
  3. The indicator lights on the case and/or earphones will show charging status. They will typically turn off or change color when fully charged.

2. 장치와의 초기 페어링

Follow these steps to pair your earphones with a new Bluetooth device:

  1. 이어폰이 충전되어 있는지 확인하세요.
  2. 충전 케이스를 여세요. 이어폰이 자동으로 페어링 모드로 전환되고 LED 표시등이 깜빡입니다(예: 파란색과 빨간색이 번갈아 깜빡임).
  3. 기기(스마트폰, 태블릿 등)에서 Bluetooth를 활성화하고 사용 가능한 기기를 검색하세요.
  4. Select "Baseus Encok W01" from the list of found devices.
  5. Once connected, the earphone LED indicators will stop flashing or flash slowly (e.g., blue every few seconds). You will hear a confirmation tone.

Note: The earphones will automatically connect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.

작동 지침

전원 켜기/끄기

  • 전원 켜기: Take the earphones out of the charging case. They will power on automatically.
  • 전원 끄기 : Place the earphones back into the charging case and close the lid. They will power off automatically and begin charging. Alternatively, if disconnected from a device for a period, they may power off automatically.

음악 재생

Use the multi-function touch button on either earphone to control music:

  • 재생/일시 중지: Single tap the touch button.
  • 다음 트랙: Double tap the right earphone's touch button.
  • 이전 트랙 : Double tap the left earphone's touch button.
  • 볼륨 업: Triple tap the right earphone's touch button.
  • 볼륨 작게 : Triple tap the left earphone's touch button.

통화 관리

Manage phone calls using the multi-function touch button:

  • 전화 받기/종료: Single tap the touch button during an incoming call or during an active call.
  • 전화 거부: Press and hold the touch button for 2 seconds during an incoming call.

음성 지원

  • Voice Assistant 활성화 : Press and hold the touch button for 2 seconds when not on a call.

유지

청소

  • 부드럽고 마른 보푸라기 없는 천으로 이어폰과 충전 케이스를 정기적으로 청소하세요.
  • 독한 화학 물질, 세척 용제 또는 강한 세제를 사용하지 마십시오.
  • Gently clean the ear tips and charging contacts to ensure proper function and hygiene.

저장

  • 사용하지 않을 때는 이어폰을 충전 케이스에 보관하여 보호하고 충전 상태를 유지하세요.
  • 기기를 서늘하고 건조한 곳에 보관하고, 직사광선과 극한의 온도를 피하세요.

문제 해결

문제가능한 해결책
이어폰 전원이 켜지지 않습니다.Ensure the earphones and charging case are fully charged. Place earphones in the case and close the lid, then open again.
이어폰이 기기와 페어링되지 않습니다.
  • 기기에서 Bluetooth가 활성화되어 있는지 확인하세요.
  • Make sure earphones are in pairing mode (flashing LED).
  • 기기의 블루투스 목록에서 "Baseus Encok W01"을 삭제하고 다시 페어링을 시도해 보세요.
  • Ensure earphones are within Bluetooth range (10 meters).
Only one earphone works.
  • Place both earphones back into the charging case, close the lid, then take them out again to re-sync.
  • 두 이어폰이 모두 충전되어 있는지 확인하세요.
  • Reset the earphones (refer to manufacturer's specific reset instructions if available, otherwise try forgetting device and re-pairing).
음질이 좋지 않거나 연결이 끊깁니다.
  • Ensure earphones are within range of your device and there are no obstructions.
  • 다른 무선 장치의 간섭을 확인하십시오.
  • Clean the ear tips and earphone grilles.
  • 이어폰을 다시 페어링해보세요.

명세서

모델 번호NGW01-01
상표베이스어스
연결 기술무선(블루투스)
폼 팩터귀에
색상검은색
재료플라스틱
주파수 범위20Hz~20kHz
제어 유형음성 제어
방수 레벨방수복
품목 무게220그램

보증 및 지원

The Baseus Encok W01 True Wireless Earphones come with a Manufacturer Warranty. For detailed warranty terms and conditions, please refer to the official Baseus web사이트를 방문하거나 고객 지원팀에 문의하세요.

추가적인 지원, 문제 해결 또는 제품 문의는 다음 웹사이트를 방문하십시오. 아마존에서 Baseus 스토어를 만나보세요 또는 공식 지원 채널을 통해 지원받을 수 있습니다.

© 2023 Baseus. 모든 권리 보유.