Amazon Basics 8-Sheet Cross-Cut Paper and Credit Card Shredder

소개

구매해주셔서 감사합니다asing the Amazon Basics 8-Sheet Cross-Cut Paper and Credit Card Shredder. This device is designed to securely dispose of sensitive documents and credit cards, turning them into small, unreadable pieces. For optimal performance and safety, please read this manual thoroughly before operation and retain it for future reference.

앞쪽 view of the Amazon Basics 8-Sheet Cross-Cut Shredder, showcasing its compact design and clear view잉 창.

안전 정보

경고: 화재 위험

• 분쇄기 내부나 주변에 에어로졸 제품을 뿌리거나 보관하지 마십시오.
• Do not shred items like metallic credit cards, as this can damage the shredder and pose a fire risk.
• 헐렁한 옷, 장신구, 머리카락, 손이 종이 투입구에 닿지 않도록 하십시오.
• 어린이와 애완동물을 분쇄기에 가까이 두지 마십시오.
• 분쇄기를 사용하지 않을 때나 청소하기 전에는 항상 전원 플러그를 뽑으십시오.

설정

1. Unpack the shredder and ensure all components are present: shredder head and waste bin.
2. 쓰레기통을 평평하고 안정적인 표면에 놓으십시오.
3. Carefully place the shredder head onto the waste bin, ensuring it is properly aligned and securely seated. The misaligned indicator light will turn off when correctly positioned.
4. 전원 코드를 표준 전기 콘센트에 꽂으세요.

The shredder is designed to fit conveniently in a home or office environment.

작동 지침

The shredder features a 4-mode control switch and LED status indicators for ease of use.

Close-up of the shredder's control panel, showing the mode switch and indicator lights.

제어 스위치 모드:

• OFF(O): 분쇄기를 끕니다.
• 반전(<<): 용지 걸림을 해결하기 위해 파쇄 메커니즘을 역방향으로 작동시킵니다.
• AUTO/ON (I): The shredder automatically starts when paper is inserted and stops when shredding is complete. This is the recommended mode for normal operation.
• 앞으로 (>>): Manually engages the shredding mechanism to push paper through.

문서 파쇄:

1. 제어 스위치를 설정하세요 AUTO/ON (I). The 'Power On' indicator light will illuminate.
2. Insert up to 8 sheets of 20-pound bond paper into the 8.7-inch-wide paper entry slot. The shredder can also handle staples and small paper clips.
3. For credit cards, insert one card at a time into the dedicated slot.
4. The shredder will automatically begin shredding. Once complete, it will stop.

A user demonstrating the insertion of paper into the shredder's entry slot.

실행 시간:

The shredder has a maximum run time of 3 minutes on, followed by a 30-minute cool-down period. Thermal protection and auto shut-off features are included to prevent overheating. If the 'Overheat' indicator light illuminates, allow the shredder to cool down for 30 minutes before resuming operation.

유지

쓰레기통 비우기:

The shredder features a clear window on the front of the bin, allowing you to monitor the shredded paper level. When the bin appears full:

1. 제어 스위치를 설정하세요 꺼짐 (O) 그리고 분쇄기의 전원 플러그를 콘센트에서 뽑으세요.
2. Lift the shredder head off the waste bin using the integrated handle.
3. Empty the shredded contents from the 4.1-gallon bin into a trash receptacle.
4. 파쇄기 헤드를 쓰레기통에 단단히 다시 끼우십시오.
5. 분쇄기의 전원 플러그를 콘센트에 다시 꽂으세요.

The shredder's viewing window allows for easy monitoring of the waste bin's fill level.

문제 해결

Refer to the indicator lights on the control panel for common issues:

• Misaligned Light: Indicates the shredder head is not properly seated on the waste bin. Lift and re-seat the shredder head until the light turns off.
• 과부하 표시등: Indicates too many sheets of paper were inserted. Use the REVERSE (<<) mode to clear the jam, remove some sheets, and re-insert a smaller quantity.
• Overheat Light: Indicates the shredder has exceeded its maximum run time or is too hot. Unplug the shredder and allow it to cool down for 30 minutes.
• 전원 켜짐 표시등: 분쇄기의 전원이 켜져 작동 준비가 완료되었음을 나타냅니다.

더 자세한 문제 해결 방법은 공식을 참조하세요. 문제 해결 가이드(PDF).

명세서

보증 및 지원

보증 정보는 공식 웹사이트를 참조하십시오. 보증(PDF) 문서.

고객 서비스 및 지원을 받으려면 다음 연락처로 문의하세요. 1-844-303-4344.