Waring Commercial Heavy Duty Blender CB15TSF Instruction Manual

소개

제품 끝view

The Waring Commercial Heavy Duty Blender CB15TSF is engineered for high-volume commercial kitchens, offering robust performance for a variety of blending tasks. Equipped with a powerful 3.75 HP motor, a 1-gallon stainless steel jar with a convenient spigot, and a variable speed timer, this blender ensures consistent and efficient results for smoothies, soups, sauces, and more.

주요 특징

• 힘: 3.75 HP commercial motor delivers professional-grade performance for high-volume blending.
• 용량: 1-gallon stainless steel jar with spigot and handles provides efficient large-batch processing.
• 시간제 노동자: 3-minute countdown feature with automatic shutoff allows efficient multitasking.
• 건설: Heavy-duty design with stainless steel container, secure lid clamps, and removable cap for adding ingredients during operation.
• 가변 속도 제어: Adjustable speeds ranging from 1,700 to 18,000 RPM for precise consistency control.

중요한 안전 정보

Please read all instructions carefully before operating the blender. Failure to follow these safety guidelines may result in injury or damage to the appliance.

• 믹서기를 청소하거나 사용하지 않을 때는 항상 전원 콘센트에서 플러그를 뽑으세요.
• 모터 베이스를 물이나 기타 액체에 담그지 마십시오.
• Keep hands and utensils out of the container while blending to prevent serious injury.
• 블렌더를 작동하기 전에 뚜껑이 제대로 닫혔는지 확인하세요.
• Do not blend hot liquids without proper ventilation through the lid cap to prevent pressure buildup.
• 이 기기는 신체적, 감각적, 정신적 능력이 저하된 사람이나 경험과 지식이 부족한 사람이 사용하도록 의도된 것이 아니며, 안전을 책임지는 사람으로부터 기기 사용에 관한 감독이나 지시를 받은 경우에만 사용해야 합니다.
• 움직이는 부품과의 접촉을 피하세요.

구성 요소

The Waring Commercial Heavy Duty Blender CB15TSF includes the following main components:

• 블렌더 베이스 (제어판 포함)
• 1-Gallon Stainless Steel Jar with Spigot and Handles
• Lid with Removable Cap

Figure 1: Waring Commercial Heavy Duty Blender CB15TSF with its main components.

Figure 2: Diagram showing the 1-gallon stainless steel container with spigot and the 3.75 HP motor base with touchpad controls.

설정

짐 풀기

1. 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
2. Inspect the blender for any signs of damage. If damaged, do not operate and contact customer support.
3. 블렌더 베이스를 깨끗하고 건조하며 안정된 표면에 놓습니다.

집회

1. Ensure the blender base is unplugged from the power outlet.
2. Place the 1-gallon stainless steel jar onto the blender base, aligning it properly until it sits securely.
3. Place the lid onto the jar and ensure it is firmly seated. The removable cap can be inserted into the lid opening.

작동 지침

제어판 이상view

The control panel features intuitive buttons for easy operation:

• STANDBY (Green Button): 기기를 켜거나 끕니다.
• STOP (Red Button): Stops any active blending cycle.
• LOW, MED, HIGH Buttons: Selects continuous blending speeds.
• 펄스 버튼: Provides short bursts of high-speed blending for chopping or quick mixing.
• TIMER (+/- Buttons): Adjusts the countdown timer for automatic shutoff.

Figure 3: Close-up of the blender's control panel, showing Standby, Stop, Low, Med, High, Pulse buttons, and the 3-minute countdown timer.

기본 블렌딩

1. Add ingredients to the stainless steel jar. Do not overfill beyond the maximum fill line.
2. Securely place the lid on the jar and insert the lid cap.
3. 믹서기를 적절한 전기 콘센트에 꽂으세요.
4. 를 누르세요 대기 버튼을 눌러 장치의 전원을 켭니다.
5. Select your desired speed by pressing the 낮은, 의학, 또는 높은 button. For quick bursts, press and hold the 맥박 단추.
6. 블렌딩이 완료되면 버튼을 누르세요. 멈추다 button or allow the timer to complete its cycle.

타이머 사용

The integrated 3-minute countdown timer allows for precise blending without constant monitoring.

1. After selecting a blending speed, use the +/- buttons next to the TIMER display to set the desired blending duration (up to 3 minutes).
2. The blender will operate for the set time and automatically shut off when the countdown reaches zero.

Dispensing with Spigot

The integrated spigot allows for easy and controlled dispensing of blended contents.

1. Ensure blending is complete and the motor has stopped.
2. Position a serving container under the spigot.
3. Open the spigot lever to dispense the contents. Close the lever when finished.

유지관리 및 청소

정기적인 청소와 관리는 블렌더의 수명과 최적의 성능을 보장합니다.

매일 청소

1. 청소하기 전에 항상 블렌더의 플러그를 뽑으십시오.
2. Remove the jar and lid from the base.
3. Wash the stainless steel jar, lid, and lid cap with warm, soapy water. Rinse thoroughly and dry immediately. The jar is dishwasher safe.
4. 광고로 블렌더 베이스 닦기amp 옷감. 베이스를 물에 담그지 마십시오.

심층 세척

For stubborn residue or odors:

1. Fill the jar halfway with warm water and a few drops of dish soap.
2. 뚜껑을 단단히 닫고 병을 받침대 위에 올려놓으세요.
3. Run the blender on a medium speed for 30-60 seconds.
4. Empty the jar, rinse thoroughly, and dry.

저장

Store the blender in a clean, dry place when not in use. Ensure all parts are dry before storing.

문제 해결

블렌더에 문제가 발생하면 아래 표를 참조하여 일반적인 문제와 해결 방법을 확인하세요.

명세서

Detailed technical specifications for the Waring Commercial Heavy Duty Blender CB15TSF:

• 상표: 경고
• 모델: CB15TSF
• 모터: 3.75 HP Commercial
• 용량: 1 Gallon (Stainless Steel Jar)
• 속도: Variable (1,700 to 18,000 RPM), Low, Medium, High, Pulse
• 시간제 노동자: 3-minute countdown with automatic shutoff
• 권tage: 120V
• 왓tage: 1800와트
• 블레이드 소재: 스테인리스 스틸
• 품목 무게: 41.1 파운드
• 식기 세척기 사용 가능: Yes (Jar)

Figure 4: Waring Commercial Heavy Duty Blender CB15TSF with dimensions labeled: Width 15", Height 22.25", Depth 15".

보증 및 지원

Your Waring Commercial Heavy Duty Blender CB15TSF comes with a limited 3-year warranty, covering defects in materials and workmanship under normal use.

For warranty claims, technical support, or replacement parts, please contact Waring Commercial customer service. You can find more information and contact details on the official 경고 상업 web대지.

제품 비디오

Watch these official product videos for additional information and demonstrations.