1. 서론
This manual provides essential instructions for the safe and proper installation, operation, and maintenance of your KanexPro Full-Motion Tilt/Swivel TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation may result in product damage or personal injury.
안전 정보
- 설치 표면이 마운트와 텔레비전의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
- 최대 중량 용량은 66파운드(30kg)를 초과하지 마십시오.
- 설치 시에는 항상 적절한 안전 장비를 사용하십시오.
- Consult a qualified professional if you are unsure about the installation process or wall type.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
2. 패키지 내용
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the mount. Contact customer support for assistance.
- Full-Motion TV Wall Mount Assembly
- 벽걸이용 하드웨어(나사, 앵커)
- TV Mounting Hardware (various screw sizes, spacers)
- 사용 설명서
이미지 2.1: 이상view of the KanexPro Full-Motion Tilt/Swivel TV Wall Mount. This image displays the main assembly of the wall mount, including the wall plate, articulating arms, and the VESA compatible TV plate.
3. 설정 및 설치
TV 벽걸이 거치대를 안전하고 안정적으로 설치하려면 다음 단계를 주의 깊게 따르십시오.
3.1 설치 전 확인 사항
- 벽 유형: Determine if your wall is solid concrete, brick, or wood stud. Different wall types require specific mounting hardware.
- Stud Finder: If mounting to wood studs, use a stud finder to locate the center of the studs.
- 필요한 도구: Drill, level, tape measure, pencil, Phillips head screwdriver, socket wrench.
- TV 호환성: Ensure your TV's VESA pattern and weight are within the mount's specifications. This mount is compatible with Hisense Roku TV 40H4 and similar models up to 66 lbs.
3.2 벽면 플레이트 장착
- Position the wall plate on the desired location on the wall. Use a level to ensure it is perfectly horizontal.
- Mark the drilling holes with a pencil.
- Drill pilot holes according to the marked positions and your wall type. For wood studs, drill 5/32 inch (4mm) holes. For concrete/brick, drill 3/8 inch (10mm) holes and insert wall anchors.
- 제공된 나사못과 와셔를 사용하여 벽판을 벽에 부착하십시오. 단단히 조이십시오.
3.3 Attaching the TV Plate to the Television
- TV를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.
- TV 뒷면에 있는 VESA 장착 구멍을 확인하세요.
- Select the appropriate screws and spacers from the provided hardware kit that fit your TV's mounting holes.
- Attach the TV plate (the part of the mount that connects to the TV) to the back of your television. Ensure it is centered and securely fastened. Do not overtighten.
3.4 Hanging the Television
- With assistance, carefully lift the television with the attached TV plate.
- Align the TV plate with the articulating arms of the wall-mounted assembly.
- Hook the TV plate onto the arms and ensure it is securely seated.
- Engage any safety locking mechanisms if present on your mount to prevent accidental dislodgement.
Image 3.1: Technical diagram illustrating the dimensions and articulation range of the KanexPro Full-Motion TV Wall Mount. This diagram shows the mount's extension, swivel, and tilt capabilities, along with key measurements in millimeters.
4. 마운트 작동
Your KanexPro Full-Motion TV Wall Mount allows for flexible positioning of your television.
- 회전 조정: The mount allows for 90 degrees of swivel to the left and right. Gently push or pull the TV to achieve the desired view잉 각도.
- 기울기 조정: The mount offers a tilt range of +20 to -20 degrees. Loosen the tilt adjustment knobs (if present), adjust the TV to the desired vertical angle, and then re-tighten the knobs to secure the position.
- 확대: The articulating arms allow the TV to be extended away from the wall for optimal viewing or retracted for a flush profile.
Always move the TV smoothly and avoid sudden, forceful movements. Ensure all cables have enough slack to accommodate the full range of motion without tension.
5. 유지관리
정기적인 유지 관리는 TV 벽걸이 거치대의 수명과 안전한 작동을 보장하는 데 도움이 됩니다.
- 청소: 부드럽고 마른 천으로 마운트를 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 용제는 사용하지 마세요.
- 정기 점검: Every 3-6 months, inspect all screws and bolts to ensure they are still tight. Re-tighten if necessary. Check for any signs of wear or damage to the mount components.
- 매끄럽게 하기: The articulating joints are designed for smooth movement. If any stiffness occurs, a small amount of silicone-based lubricant can be applied to the pivot points.
6. 문제 해결
TV 벽걸이 거치대에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 설치 후 TV가 수평이 아닙니다. | Wall plate or TV plate not perfectly level. | Carefully remove the TV, adjust the wall plate or TV plate using a level, and re-mount. |
| 마운트가 느슨하거나 흔들립니다. | Mounting screws are not fully tightened or incorrect hardware used. | Ensure all wall and TV mounting screws are securely tightened. Verify correct hardware for your wall type. Do not exceed weight capacity. |
| 기울기 또는 회전 조절에 어려움이 있습니다. | Tilt knobs are too tight or joints require lubrication. | Loosen tilt knobs before adjusting. Apply a small amount of silicone-based lubricant to stiff joints. |
| TV cables are too tight. | Insufficient cable slack for full range of motion. | Ensure all cables have enough slack to prevent tension when the TV is moved to its maximum extension or angle. |
7. 사양
- 상표: 카넥스프로
- 모델: Full-Motion Tilt/Swivel TV Wall Mount
- 장착 유형: 벽걸이형
- 이동 유형: 관절형, 회전형, 기울기형
- 재료: 합금강
- 색상: 검은색
- 호환 장치: Television (e.g., Hisense Roku TV 40H4)
- 최대 중량 용량: 66파운드(30kg)
- 회전 기능: 90 Degrees Left to Right
- Tilt Feature: +20도에서 -20도까지
- 사전 조립: Yes, for quick installation
8. 보증 및 지원
For warranty information or technical support, please contact KanexPro customer service directly. Refer to the product packaging or the official KanexPro web연락처 정보 사이트.
Please have your product model information and purchase date available when contacting support.