백셀 T0165

VAXCEL Melbourne 1L LED Dusk to Dawn Outdoor Post Light

Model T0165 Instruction Manual

1. 중요한 안전 정보

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or fatal. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

  • 경고: 감전의 위험이 있습니다. 설치 또는 수리하기 전에 퓨즈 또는 회로 차단기의 전원을 차단하십시오.
  • 모든 전기 연결은 지역 규정, 조례 또는 미국 전기 규격(NEC)을 준수해야 합니다.
  • 배선 절차에 대해 확실하지 않은 경우 자격을 갖춘 전기 기술자에게 문의하세요.
  • This fixture is designed for outdoor, wet location use. Ensure all connections are properly sealed to prevent water intrusion.
  • Do not attempt to modify the integrated LED light source. It is not replaceable.

2. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

  • 1 x VAXCEL Melbourne Post Light Fixture (with integrated LED)
  • 1 x Clear Crackle Glass Shade
  • 장착 하드웨어(나사, 와이어 너트)

3. 사양

특징사양
모델 번호T0165
치수(길이 x 너비 x 높이)8인치 x 8인치 x 16인치
무게3.97 파운드
재료합금강, 유리
광원Integrated LED (6 Watts)
명도300루멘
색온도3000 켈빈(웜화이트)
연색지수(CRI)82
권tage120 볼트
특별 기능Dusk to Dawn Sensor, Exterior Wet Rated
장착 유형Post Mounted (fits standard 3-inch diameter post, not included)
Diagram showing the dimensions of the VAXCEL Melbourne post light. Height (A) is 16 inches, Width (B) is 8 inches.
Figure 1: Product Dimensions. The fixture measures 8 inches in width and 16 inches in height.

4. 설치 지침(Setup)

Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed to be mounted on a standard 3-inch diameter post (post not included).

  1. Prepare the Post: Ensure your existing 3-inch diameter post is securely installed and has electrical wiring extending from its top.
  2. 배선 연결: Carefully connect the fixture's wires to your household electrical wires. Use the provided wire nuts to secure connections:
    • Connect the black wire from the fixture to the black (hot) wire from the post.
    • Connect the white wire from the fixture to the white (neutral) wire from the post.
    • Connect the green or bare copper ground wire from the fixture to the green or bare copper ground wire from the post.
    모든 연결이 단단하고 안전한지 확인하세요.
  3. 고정장치 장착: Carefully place the fixture onto the top of the 3-inch post, aligning any pre-drilled holes if applicable. Secure the fixture to the post using the provided mounting screws. Do not overtighten.
  4. 유리 그늘 설치: Gently place the clear crackle glass shade into the fixture, ensuring it is seated properly and securely.
  5. 복원력 : 조명기구를 안전하게 설치하고 모든 연결을 완료한 후 회로 차단기에서 전원을 복구하세요.
VAXCEL Melbourne post light installed on a black outdoor post in a garden setting, with a house in the background.
Figure 2: VAXCEL Melbourne Post Light installed on an outdoor post.
Close-up of the VAXCEL Melbourne post light showing the small circular photocell sensor on the base of the fixture.
Figure 3: Photocell for Dusk to Dawn feature, located on the base of the fixture.

5. 사용 설명서

The VAXCEL Melbourne Post Light features an integrated dusk-to-dawn photocell sensor for automatic operation. There are no manual controls for this light fixture.

  • 자동 켜기/끄기: The photocell sensor (refer to Figure 3) detects ambient light levels. The fixture will automatically turn on when it gets dark and turn off when it detects sufficient daylight.
  • 초기 작업: Upon initial power-up, the light may take a few minutes to calibrate or may turn on briefly before turning off if it is daytime. This is normal operation.

6. 유지관리

Regular maintenance will help preserve the appearance and functionality of your VAXCEL Melbourne Post Light.

  • 청소: 조명기구를 청소하려면 전원이 꺼져 있는지 확인하십시오. 부드러운 천으로 닦으십시오.amp 천으로 닦으세요. 연마성 세제나 용제는 마감재나 유리를 손상시킬 수 있으므로 사용하지 마세요.
  • LED 광원 : The LED light source is integrated and designed for long-lasting performance. It is not user-replaceable.
  • 광전지 : Keep the photocell sensor (Figure 3) free from dirt, debris, or obstructions (e.g., leaves, snow) to ensure proper dusk-to-dawn operation.

7. 문제 해결

If your VAXCEL Melbourne Post Light is not functioning as expected, refer to the following common issues and solutions:

문제가능한 원인해결책
밤에는 불이 켜지지 않습니다.고정 장치에 전원이 공급되지 않습니다.
Photocell is obstructed or faulty.
배선 문제.
Check circuit breaker and wall switch (if applicable).
Ensure photocell is clean and not blocked by objects.
Verify wiring connections are secure (with power off).
낮에는 불이 켜져있습니다.Photocell is obstructed or faulty.
센서에 도달하는 주변광이 부족합니다.
Ensure photocell is clean and not blocked.
Relocate the fixture if it's in a shaded area during the day.
빛이 깜빡이거나 어두워집니다.배선 연결이 느슨합니다.
전력 변동.
전원을 끈 상태에서 모든 배선 연결 상태를 확인하십시오.
전력 변동이 의심되는 경우 전기 기술자와 상담하세요.

If these steps do not resolve the issue, please contact VAXCEL customer support.

8. 보증 정보

The VAXCEL Melbourne 1L LED Dusk to Dawn Outdoor Post Light (Model T0165) is covered by a 5년 한정 보증 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the VAXCEL official web사이트를 방문하거나 고객 지원팀에 문의하세요.

9. 연락처 정보

For further assistance, technical support, or warranty claims, please contact VAXCEL customer service:

© 2026 VAXCEL. All rights reserved. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.