GeneralAire 990-13

GeneralAire 가습기 워터패드 990-13 사용 설명서

소개

This manual provides essential information for the proper installation, operation, and maintenance of your GeneralAire 990-13 Humidifier Water Pad. This product is a replacement component designed to ensure optimal performance of compatible GeneralAire whole-house humidifiers. Please read these instructions carefully before proceeding with installation or maintenance.

Compatible Humidifier Models

The GeneralAire 990-13 Water Pad is compatible with the following GeneralAire power humidifier (drain type) models:

  • SL-16 series
  • 709 시리즈
  • 990 시리즈
  • 1040 시리즈
  • 1042 시리즈
  • 1137 시리즈

제품 사양

특징설명
모델 번호990-13
치수(대략적)9-3/4 inches (W) x 12-1/4 inches (H) x 1-1/2 inches (D)
재료Aluminum evaporator material enclosed in heavy wire frame and channeling
코팅Super absorbent coating for maximum water distribution; non-soluble wetting agent for increased efficiency
무게약 1.5파운드

메모: This is a custom-sized filter. Filters are built to tolerances of +/- 1/8 inch.

설치 지침

Before beginning, ensure your humidifier's power supply is disconnected to prevent accidental operation.

  1. Access the Humidifier: Refer to your specific GeneralAire humidifier model's manual for instructions on how to safely open the unit and access the existing water pad. This typically involves removing a cover or panel.
  2. Remove Old Water Pad: Carefully slide out the old water pad from its housing. Dispose of the old pad responsibly.
  3. Prepare New Water Pad: The new water pad may have excess coating that can shake off before first use. This is normal and does not affect performance.
  4. Insert New Water Pad: Slide the new GeneralAire 990-13 Water Pad into the humidifier's housing, ensuring it is seated correctly and securely.
  5. Secure Humidifier: Close and secure any covers or panels that were removed.
  6. 복원력 : Reconnect the humidifier's power supply.
Two GeneralAire 990-13 Humidifier Water Pads, removed from packaging, showing the aluminum evaporator material.

This image shows two GeneralAire 990-13 Humidifier Water Pads, removed from their packaging. Each pad consists of an aluminum evaporator material enclosed within a heavy wire frame. The textured surface of the pad, designed for maximum water absorption and distribution, is clearly visible.

작업

The GeneralAire 990-13 Water Pad functions as the primary evaporative surface within your humidifier. Once installed, the humidifier's system will automatically draw water onto the pad, and air will pass through it, facilitating the evaporation process and adding humidity to your indoor environment. No direct user interaction with the pad is required during operation.

유지 보수 및 교체

Regular replacement of the water pad is crucial for maintaining your humidifier's efficiency and ensuring optimal humidity output.

  • For optimum performance, it is recommended to replace the filter twice per heating season.
  • At a minimum, change the water pad annually.

Failure to replace the water pad as recommended can lead to reduced humidification efficiency, increased energy consumption, and potential mineral buildup within the humidifier unit.

Two GeneralAire 990-13 Humidifier Water Pads in their retail packaging.

This image displays two GeneralAire 990-13 Humidifier Water Pads, still sealed in their individual retail packaging. The packaging highlights key features such as compatibility with various GeneralAire humidifier models (709, 990, 1040, 1042, 1137 & SL16 series), dimensions, and replacement recommendations. A QR code and the GeneralAire brand logo are also visible.

문제 해결

If you experience reduced humidity output from your GeneralAire humidifier after installing a new water pad, consider the following:

  • 잘못된 설치: Ensure the water pad is correctly seated within its housing and that all humidifier components are properly reassembled.
  • 상수도: Verify that the humidifier is receiving an adequate water supply and that the water distribution system is functioning correctly.
  • Humidistat Settings: Check your humidistat settings to ensure it is set to an appropriate humidity level for your home.
  • 공기 흐름: Confirm that there is proper airflow through the humidifier. Blockages can impede evaporation.
  • 패드 상태: If the pad is old or heavily scaled, replace it according to the maintenance schedule.

For persistent issues, consult your GeneralAire humidifier's main instruction manual or contact GeneralAire customer support.

보증 및 지원

For specific warranty information regarding your GeneralAire 990-13 Water Pad or for further technical assistance, please visit the official GeneralAire web사이트를 방문하거나 고객 지원팀에 직접 문의하세요.

공식적인 Web대지: www.generalfilters.com

관련 문서 - 990-13

사전view GeneralAire 모델 1137 가습기 설치 및 사용 설명서
GeneralAire 모델 1137 Legacy Flow Through 가습기(GFI #5137)의 설치 및 사용 설명서입니다. 제품 사양, 설치 단계, 배선, 유지 관리, 문제 해결 및 보증에 대한 정보를 확인하세요.
사전view GeneralAire 보증 차트: 구성품 적용 범위 및 취급 지침
Canadian General Filters Ltd.의 GeneralAire 가습기, 공기 청정기, 청정기 및 제습기에 대한 보증 기간과 취급 지침을 자세히 설명한 포괄적인 보증 차트입니다.
사전view GeneralAire GF-3200PFT 설치 설명서: 증발식 가습기 사용 안내서
GeneralAire GF-3200PFT 전자 제어식 펄스 유량 가습기의 상세 설치 안내서입니다. HVAC 전문가를 위해 플레넘 설치, 덕트 ​​작업, 급수, 전자 제어기 설정, 배선, 시동 및 유지 보수 절차를 다룹니다.
사전view GeneralAire 모델 5500 증기 실린더 교체 지침
GeneralAire 모델 5500 가습기의 증기 실린더를 교체하는 방법에 대한 자세한 지침으로, 안전 예방 조치, 제거, 청소 및 재조립 절차가 포함되어 있습니다.
사전view GeneralAire 5500 스팀 가습기: 설치 및 사용 설명서
GeneralAire 5500 스팀 가습기의 설치 및 사용 설명서입니다. 최적의 실내 공기질을 위해 설치, 작동, 유지 관리 및 문제 해결 방법을 알아보세요.
사전view GeneralAire Elite 스팀 가습기 설치 및 사용 설명서 – 덕트형 모델
GeneralAire Elite 스팀 가습기(덕트형)의 설치 및 작동에 대한 종합 안내서입니다. 최적의 실내 공기질을 위한 설치, 작동, 유지 관리, 문제 해결 및 기술 사양을 다룹니다.