소개
The J-Tech Digital JTDHDEX1x4 is an HDMI extender and splitter unit designed to transmit a 1080P 60Hz HDMI audio/video signal over long distances using a single Cat5e/6 Ethernet cable. This system features one HDMI input and four HDMI outputs, allowing a single source to be displayed on up to four separate screens. Additionally, a local HDMI loop-out port on the transmitter enables connection of a fifth display for convenient source monitoring. The unit incorporates Power over Cable (PoC) functionality, meaning only the transmitter requires a power adapter, simplifying installation by powering the receivers via the connected Ethernet cable. It also supports IR control for remote management of the source device and includes an EDID toggle switch for optimal audio format compatibility. This plug-and-play device is suitable for various commercial and residential environments.
패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- 1 x JTDHDEX1x4 Transmitter Unit
- 4 x JTDHDEX1x4 Receiver Units
- 1 x IR TX Cable (IR Emitter)
- 4 x IR RX Cables (IR Receiver)
- 1 x 12V DC 전원 어댑터
- 2 x Transmitter Mounting Brackets
- 8 x Receiver Mounting Brackets
- 1 x 사용자 설명서
그림 1: 패키지 내용물 및 단위 치수
제품 특징
- HDMI Signal Extension: Extends 1080P@60Hz HDMI signals up to 164 feet (50 meters) over a single Cat5e/6 Ethernet cable.
- 1x4 Splitter Functionality: Distributes one HDMI input signal to four remote displays simultaneously.
- Local HDMI Loop-out: Includes an HDMI output on the transmitter for connecting a local display, allowing for real-time source monitoring.
- 케이블을 통한 전원 공급(PoC): Only the transmitter requires a power adapter; receivers are powered via the connected Ethernet cable, reducing cable clutter.
- IR 통제: Enables control of the HDMI source device from the location of any connected display using the included IR cables.
- EDID 관리: Features an EDID toggle switch to ensure optimal audio format compatibility, supporting formats such as LPCM 2.0, Dolby Digital, and DTS 5.1.
- 디지털 오디오 지원: Compatible with various digital audio formats.
Figure 2: JTDHDEX1x4 Key Features
Figure 3: PoC and EDID Management
설정 및 설치
Follow these steps to set up your JTDHDEX1x4 HDMI Extender Splitter:
- 송신기에 전원을 공급하세요: Connect the included 12V DC power adapter to the 'DC/12V' port on the transmitter unit and plug it into a power outlet. The transmitter will power on.
- HDMI 소스 연결: Connect your HDMI source device (e.g., Roku, Blu-ray player, laptop) to the 'HDMI In' port on the transmitter using an HDMI cable.
- 이더넷 케이블 연결: Connect Cat5e/6 Ethernet cables from the 'Cat Out' ports (Cat out1, Cat out2, Cat out3, Cat out4) on the transmitter to the 'Cat5e/6 Input' port on each of the four receiver units. For optimal performance, use high-quality J-Tech Digital Cat5e or Cat6 Ethernet cables.
- 디스플레이 연결: Connect each receiver unit to its respective display (TV, monitor) using an HDMI cable from the 'HDMI Out' port on the receiver to the HDMI input on the display.
- Local HDMI Loop-out (Optional): If you wish to monitor the source locally, connect an additional HDMI cable from the 'HDMI Out' port on the transmitter to a local display.
- IR Control Setup (Optional):
- Connect the IR TX cable (emitter) to the 'IR Out' port on the transmitter. Position the IR emitter head near the IR sensor of your HDMI source device.
- Connect the IR RX cables (receivers) to the 'IR-RX' port on each receiver unit. Position the IR receiver head in a location where it can receive signals from your remote control.
- 전원 켜기 장치: Ensure all connected displays and the HDMI source device are powered on. The system is plug-and-play and should automatically detect and display the signal.
Figure 4: Standard Setup Diagram
Figure 5: Application 1 Wiring Diagram
Figure 6: Cascading Application Diagram
비디오 설정 가이드
Video 1: J-Tech Digital HDMI Extender Splitter Setup Guide. This video provides a visual walkthrough of the unboxing and connection process for the JTDHDEX1x4 unit.
작동 지침
EDID 스위치
The transmitter unit features an EDID (Extended Display Identification Data) toggle switch. This switch allows you to select the preferred audio format to ensure compatibility with your connected displays and audio systems. The available settings are typically 2.0 (for stereo audio) and 5.1 (for surround sound audio). Adjust this switch if you experience audio issues or require a specific audio format.
IR 제어
The IR control feature allows you to control your HDMI source device (e.g., cable box, DVD player) from the location of any of your remote displays. Ensure the IR TX cable is correctly positioned near the source's IR sensor and the IR RX cables are positioned on the receivers to pick up signals from your remote control. The IR control is one-way, transmitting commands from the display location back to the source.
명세서
| 모델 | JTDHDEX1x4 |
| 비디오 해상도 | 1080P@60Hz |
| 연장 거리 | Cat164e/50을 통해 최대 5m(6피트) |
| HDMI 입력 | 1 |
| HDMI Output (Remote) | 4 |
| HDMI Output (Local Loop-out) | 1 |
| Power Over Cable (PoC) | Supported (Receivers powered by Transmitter) |
| IR 제어 | One-way (Source control from display location) |
| EDID 스위치 | 2.0 / 5.1 Audio Selection |
| 지원되는 오디오 형식 | LPCM 2.0, Dolby Digital, DTS 5.1 |
| 색상 | 검은색 |
| 품목 무게 | 2파운드(대략) |
Figure 7: Transmitter and Receiver Interfaces
문제 해결 및 FAQ
일반적인 질문
- Q: Can this product extend 4K signals?
A: No, this model is specifically designed to extend 1080P@60Hz signals and does not support 4K signal extension. - Q: Is IR control bi-directional?
A: No, the IR control feature is one-way. It allows you to control the HDMI source from the display location, but not vice-versa. - Q: Does this product support multi-resolution output?
A: No, this device does not support multi-resolution output. To ensure compatibility and proper functionality, all devices in your setup (source and displays) should support the same resolution.
일반적인 문제 해결 팁
- 비디오/오디오 없음: Ensure all cables (HDMI, Ethernet, power) are securely connected. Verify that the HDMI source and all displays are powered on and set to the correct input. Check the EDID switch setting for audio compatibility.
- 화질이 좋지 않음: Ensure you are using Cat5e or Cat6 cables of appropriate length and quality. Longer cable runs or lower quality cables can affect signal integrity.
- IR 제어가 작동하지 않음: Check that the IR TX emitter is correctly positioned over the source device's IR sensor and the IR RX receiver is in a clear line of sight for your remote control.
- 간헐적 신호: This can sometimes be resolved by ensuring all devices are set to the same native resolution. Power cycling all components (source, extender, displays) may also help.
보증 및 지원
The J-Tech Digital JTDHDEX1x4 HDMI Extender Splitter comes with a 1년 제조사 보증. Additionally, J-Tech Digital provides 평생 무료 기술 지원 from their team based in Stafford, TX. Support is available Monday through Friday, 9 AM to 6 PM CST. For technical assistance or warranty claims, please refer to the contact information available on the J-Tech Digital seller page or web대지.