D-Link DGS-1016C 16-Port Gigabit Unmanaged Ethernet Switch

소개

The D-Link DGS-1016C is a 16-port Gigabit unmanaged switch designed for small office/home office (SOHO) and small to medium-sized business (SMB) environments. It provides high-speed network connectivity with plug-and-play simplicity, requiring no complex configuration. This switch supports energy-efficient Ethernet (IEEE 802.3az) to reduce power consumption and optimize energy usage based on cable length and network traffic.

주요 특징:

• High-speed connections: Sixteen (16) Gigabit (10/100/1000) Ports for bandwidth-demanding networks.
• Plug-and-play installation: Easily set up your network without meticulous configuration.
• Energy-efficient: Saves energy and reduces power to Ports when there's no traffic.
• Intelligent power Optimization: Optimizes power usage for a port based on the length of cable connected to it.
• Solid, metal housing: Durable for rack mounting and lifetime use.
• Fanless design: Quiet operation that's ideal for office environments.
• Rack mountable: Mounts in standard 19" rack and sits on table tops.

패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

• DGS-1016C 16-Port Gigabit Unmanaged Switch
• 전원 어댑터
• 빠른 설치 가이드(QIG)
• 2 Rackmount Brackets
• 나사 8개
• 4 고무 발

If any of the above items are missing or damaged, please contact your local D-Link reseller for replacement.

설정

시작하기 전에:

Ensure you have all the necessary components as listed in the "Package Contents" section. This switch is unmanaged, meaning it requires no software configuration for basic operation.

데스크탑 설치:

1. 스위치를 평평하고 안정된 표면에 놓으십시오.
2. Attach the included rubber feet to the bottom of the switch to prevent scratching and provide stability.
3. Connect your network devices (computers, servers, network printers, etc.) to any of the 16 Gigabit Ethernet ports using standard RJ-45 Ethernet cables.
4. Connect the power adapter to the switch's power input and then to a power outlet.

랙마운트 설치:

1. 제공된 나사를 사용하여 두 개의 랙마운트 브래킷을 스위치 측면에 부착합니다.
2. 스위치를 적절한 랙 나사(별도 구매)를 사용하여 표준 19인치 장비 랙에 고정하십시오.
3. 네트워크 장치를 이더넷 포트에 연결하십시오.
4. Connect the power adapter to the switch's power input and then to a power outlet.

스위치 조작

The DGS-1016C is an unmanaged switch, meaning it operates automatically without the need for user configuration. Once powered on and connected to network devices, it will begin forwarding data.

LED 표시등:

The front panel of the switch features LED indicators for each port, providing visual status of network activity and connection speed.

• 전원 LED: 스위치의 전원 상태를 나타냅니다.
  • 에: 스위치가 켜져 있습니다.
  • 끄다: 스위치의 전원이 꺼져 있거나 전원이 공급되지 않고 있습니다.
• 링크/동작 LED(포트당): 각 포트의 연결 상태 및 활동을 나타냅니다.
  • Solid Green (1000Mbps): A device is connected at Gigabit speed (1000 Mbps).
  • Solid Amber (10/100Mbps): A device is connected at 10 Mbps or 100 Mbps speed.
  • 섬광: Data is being transmitted or received on that port.
  • 끄다: 해당 포트에 장치가 연결되어 있지 않거나, 연결된 장치의 전원이 꺼져 있습니다.

자동 협상:

Each port on the DGS-1016C automatically detects the network speed (10, 100, or 1000 Mbps) and duplex mode (half or full) of the connected device and adjusts accordingly. This ensures optimal performance without manual configuration.

에너지 효율 이더넷(EEE):

The switch supports IEEE 802.3az EEE, which automatically reduces power consumption during periods of low data activity. It also optimizes power usage based on the length of the connected Ethernet cable, further enhancing energy efficiency.

유지

The DGS-1016C is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure its longevity:

• 청소: 부드럽고 마른 천으로 스위치 외부를 닦으세요. 액체나 에어로졸 세척제는 사용하지 마세요.
• 통풍: 스위치의 통풍구가 막히지 않았는지 확인하십시오. 과열을 방지하기 위해 기기 주변에 적절한 공기 흐름을 유지하십시오.
• 환경: Operate the switch within its specified environmental conditions (temperature and humidity) to prevent damage. Avoid placing it in direct sunlight or near heat sources.
• 힘: Use only the power adapter supplied with the switch. Disconnect power during electrical storms or when unused for long periods.

문제 해결

If you encounter issues with your DGS-1016C switch, refer to the following common problems and solutions:

전원 없음:

• 전원 어댑터가 스위치와 작동하는 전원 콘센트에 안전하게 연결되어 있는지 확인하세요.
• 다른 기기를 콘센트에 꽂아 전원 콘센트가 작동하는지 확인하십시오.
• Check the power LED on the front panel; it should be illuminated.

포트에 링크/활동이 없습니다.

• 이더넷 케이블이 스위치 포트와 네트워크 장치에 제대로 연결되어 있는지 확인하십시오.
• 연결된 네트워크 장치의 전원이 켜져 있고 올바르게 작동하는지 확인하세요.
• 케이블 불량 여부를 확인하기 위해 다른 이더넷 케이블을 사용해 보세요.
• Test the connection with a different port on the switch.
• Check the Link/Act LED for the specific port; it should be solid or flashing.

네트워크 속도가 느립니다:

• Ensure all connected devices support Gigabit Ethernet (1000 Mbps) for optimal speed. The Link/Act LED should be green for Gigabit connections.
• 연결된 기기에서 과도한 네트워크 트래픽이나 대역폭을 많이 사용하는 애플리케이션이 실행 중인지 확인하십시오.
• Verify the quality and length of your Ethernet cables. Cat5e or Cat6 cables are recommended for Gigabit speeds.

If these steps do not resolve your issue, please refer to the D-Link support website or contact D-Link technical support for further assistance.

명세서

보증 및 기술 지원

D-Link products are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty information included with your product or visit the official D-Link web대지.

For technical support, product documentation, and software updates, please visit the D-Link support portal:

D-링크 지원 Web대지

When contacting support, please have your product model number (DGS-1016C) and serial number ready.